计算机术语 翻译 1.USB Ports Configuration (USB 8 Ports) 2.USB 2.0 Ports Enzble
(Enable) 3.Legacy USB Support
(Enabled) 4.Port 64／60 Emulation
(Disabled) 5.USB 2.0 Contvoller Mode(Hispeed) 6.BIOS EHCI Hand－off
为您推荐：
扫描下载二维码收藏到： &
(提示：顶到域名世界首页，分享给更多网友)&&
欢迎您就本域名知识点留言评论!
您的姓名：
* 可选项，留空即为匿名发表
评论内容：
剩余字数：& * 按 Ctrl + Enter 直接发送.
域名世界提醒您:评论只需提交一次,请耐心等候,审核后方可显示.
精彩域名知识
域名世界推荐114网址导航So, you just purchased a D-Link router and now you’re ready to get your fast Wi-Fi up and running. Thanks to D-Link’s Quick Router Setup process, it should be a piece of cake. But just in case you’d like some extra help, this blog explains the entire process and even provides links to helpful resources.
What You Should Expect to See in the Box
Although older devices may include a setup wizard CD instead of a Wi-Fi configuration card, your box should include:
Power adapter
Ethernet cable
Wi-Fi Configuration Card
Quick Install Guide
Before you Begin
Users with DSL providers – If you are using a
connection, you will need your PPPoE username and password. If you do not have this information, contact your Internet service provider (ISP). Do not proceed until you have this information.
Users with Cable providers – Make sure you unplug the power to your modem. In some cases, you may need to turn it off for up to 5 minutes.
Users with a Modem/Router Combo – If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so your D-Link router can work properly. Please contact your ISP or refer to the user manual for your modem/router device.
Step 1: Connect the included power adapter to a wall socket and your router
Step 2: Connect the Ethernet cable to the WAN (or internet) port of both your modem and router, connecting the two. (WAN ports are normally yellow)
Step 3: Give it a moment to start up with a light indication
Step 4: Head to your computer or mobile device
Step 5: Look in your network preferences and connect to the Wi-Fi Name (SSID) found on the provided Wireless Configuration Card and enter in the password also listed on the card.
Congratulations! You’re connected!
Is The Quick Setup Not Cutting It? Let’s Delve Deeper…
Step 1: Unplug the Power to your Cable/DSL Internet Modem
Step 2: Connect an Ethernet cable from your computer/laptop to a LAN port (Port 1,2,3 or 4) on your router
Step 3: Connect your Cable/DSL modem to the Internet Port on your router
Step 4: Power on both the router and your Internet Cable/DSL Modem
Step 5: Open your Internet browser (Internet Explorer/Firefox) and enter
into the address bar.
Step 6: You should be prompted with the D-Link Quick Router Setup Wizard, Click Next to Begin.
Note: This wizard will only appear at the first configuration. If your router has been configured previously, you will need to reset it to go through the setup. To reset your device to default settings, press and hold the reset button (on the back of the router) for 10 seconds and release. The lights on the front of the router should all flash and reboot. – Return to step 5
The Router will perform a scan to determine the type of internet service you have. If successful, the Internet Setup will be skipped.
If the scan was not successful, you will be prompted to select your Internet Type:
DHCP Connection (Dynamic IP Address) – Cable Internet Service (Rogers,Shaw,Cogeco, Videotron, Teksavvy)
Username / Password (PPPoE) – DSL Internet Service (Bell Sympatico, Teksavvy DSL, Sasktel, Acanac)
Username: Your Internet username (Provided by your Internet Service Provider)
Password: Your Internet Password (Provided by your Internet Service Provider)
Next is your Wireless Settings. Enter a New Wireless Network Name and Password. This password is what you will need when connecting to your wireless signal for the first time.
Enter a password for your router. This password is needed when you want to log into the router configuration setup page.
Note: This is not your wireless password
Select your Time Zone.
A summary of your wireless settings is displayed. This includes your wireless network name and your wireless password. Click Save.
The router will now reboot to apply your new settings and the setup is complete.
If you still need additional assistance, please visit
to get started on a support path to get things up and running.
You Might Also Like
Subscribe & Follow
Get on the List
First Name
Select one
Like us on Facebook
ABOUT D-LINK
D-Link helps you connect to more of everything with our innovative approach to computer networking. From relatively modest beginnings in Taiwan, the company has grown over the last 30 years into an exciting global brand offering the most up-to-date network solutions.
Whether it's to suit the needs of the home consumer, a business or service provider, we take pride in offering award-winning networking products and services.
Categories
Latest News
Search the siteGET ON THE LIST
First Name
Select one