TP-Link WN-823N
Login to Your Account
Dislikes: &0
Ergebnis 1 bis 7 von 7
Linear-Darstellung
TP-Link WN-823N
Liebe Community,
ich benutze momentan Ubuntu 13.10. Zum Experimentieren habe ich die aktuelle Version von VirtualBox 4.3.4. r91027 für Linux amd64 installiert. Anschliessend habe ich eine virtuelle Maschine mit Kali Linux GNOME aufgesetzt, welche soweit auch wunderbar funktioniert.
Nun m?chte ich zum Ausprobieren die Netzwerkkarte direkt ansprechen k?nnen (z.B. Monitormode). Nach langer Recherche musste ich mir eingestehen, dass es nicht m?glich ist, die eingebaute Netzwerkkarte direkt durchzugeben. Also habe ich mir eine TP-Link WN-823N Wlan-USB-Adapter gekauft, welcher unter Ubuntu wunderbar funktioniert. Allerdings erkennt Kali diesen überhaupt nicht.
Nun stelle ich mir die Frage, ob das die Schuld von VirtualBox ist, weil es die Schnittstellen blockt, oder ob Kali die Treiber fehlen. Allerdings habe ich versucht, die Treiber gem?ss dem Ubuntu-Forums zu installieren, was gescheitert ist. Ich hoffe auf Unterstützung unter Gleichgesinnten
Mit freundliche Grüssen
Ge?ndert von Nick Lehmann (04.12.13 um
Grund: Tippfehler im Namen :D
TP-Link WN-823N
Bin zwar kein Gleichgesinnter, kann dir aber ziemlich sicher sagen, dass dir niemand helfen kann, wenn du so sp?rliche Infos lieferst. Was sagt 'dmesg' auf dem virtualisierten System, wenn du den Stick einsteckst? Wie sieht's im Syslog aus? Zeigt 'lsusb' den Adapter an? Ist die VM so eingestellt, dass sie USB-Devices durchreicht?
Im Falle, dass das System den Adapter &sehen& kann: Welche Treiber verwendest du? Auf welche Anleitung beziehst du dich? Welche Fehler treten dabei auf (Fehlermeldungen bitte im Wortlaut)?
Denken ist manchmal so, als würde man wissen auskotzen.
Da hast du natürlich vollkommen recht. Die Ausgaben von Kali befinden sich im Anhang. Der Syslog war leider schon direkt nach dem Hochfahren zu gross, um ihn hochzuladen. Anscheinend erkennt Kali die Wlan-Karte überhaupt nicht.
Allerdings scheint das Problem zuerst bei VirtualBox zu liegen. Kali kann auch keine normalen USB-Sticks erkennen. Deswegen habe ich das Extension Pack installiert und den USB-Controller aktiviert. Leider war das nicht die L?sung, da VirtualBox die Ger?te trotzdem nicht durchgibt.
Angeh?ngte Dateien
(118 Bytes, 3x aufgerufen)
(24,4 KB, 7x aufgerufen)
Falls du es noch nicht probiert hast:
In der VirtualBox unter Ger?te -& USB-Ger?te -& dein Ger?t ausw?hlen.
Muss ich jedenfalls machen um die USB Ger?te durchzureichen.
999 119 725 3
You see the drive hooks a function by patching the system core table
so it's not safe to unload it unless another thread is about to jump in there
and do its stuff. And you don't want to end up in the middle of invalid memory
Mittlerweile habe ich die Wlan-Karte unter Kali zum Laufen gebracht. Nach der Installation der VirtualBox-Erweiterungen und einem Neustart war ich in der Lage, USB-Ger?te an den Gast durchzureichen.
Zu diesem Zeitpunkt hat airmon-ng die Karte noch nicht angezeigt, obwohl man sie über den Netzwerk-Manager schon nutzen konnte.
Deshalb habe ich Treiber von Realtek installiert. Für die besagte Wlan-Karte war das der Treiber 8192cu, welchen ich von der Seite heruntergeladen und per &make& und &make install& installiert habe. Anschliessend musste ich die Module noch per &modprobe 8192cu& laden. Zwischenzeitlich zeigt airmon-ng die Karte auch an, aber leider nicht permanent.
Hat jemand einen Hinweis?
Schau mal den Output von dmesg an, wenn das Modul geladen wurde. Ggf. findet sich dort ein Hinweis was schief geht. Evtl. müssen noch abh?ngige Module geladen werden, eine Device-ID mitgegeben werden o.?..
Denken ist manchmal so, als würde man wissen auskotzen.
Bei der Ausgabe von dmesg ist mir aufgefallen, dass er immer oft loggt: &survey done event&. Leider habe ich keine Ahnung, was damit gemeint ist...
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.7-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.7.2-0+kali8
0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.7-trunk-amd64 root=UUID=-f942-4f77-b8b3- ro initrd=/install/gtk/initrd.gz quiet
0.000000] e820: BIOS-provided physical RAM map:
0.000000] BIOS-e820: [mem 0xfbff] usable
0.000000] BIOS-e820: [mem 0xfc00-0xffff] reserved
0.000000] BIOS-e820: [mem 0xffffff] reserved
0.000000] BIOS-e820: [mem 0x000003ffeffff] usable
0.000000] BIOS-e820: [mem 0xfff000003fffffff] ACPI data
0.000000] BIOS-e820: [mem 0xfffc00000ffffffff] reserved
0.000000] NX (Execute Disable) protection: active
0.000000] DMI 2.5 present.
0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
0.000000] e820: update [mem 0xx0000ffff] usable ==& reserved
0.000000] e820: remove [mem 0x000afffff] usable
0.000000] No AGP bridge found
0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x
0.000000] MTRR default type: uncachable
0.000000] MTRR variable ranges disabled:
0.000000] x86 PAT enabled: cpu 0, old 0x6, new 0x6
0.000000] CPU MTRRs all blank - virtualized system.
0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [fffffff0]
0.000000] initial memory mapped: [mem 0xx1fffffff]
0.000000] Base memory trampoline at [ffff] 99000 size 24576
0.000000] init_memory_mapping: [mem 0xx3ffeffff]
[mem 0xx3fdfffff] page 2M
[mem 0x3feffeffff] page 4k
0.000000] kernel direct mapping tables up to 0x3ffeffff @ [mem 0x1fffd000-0x1fffffff]
0.000000] RAMDISK: [mem 0xx3720dfff]
0.000000] ACPI: RSDP e (v02 VBOX
0.000000] ACPI: XSDT fffC (v01 VBOX
0.000000] ACPI: FACP fff00f0 000F4 (v04 VBOX
0.000000] ACPI: DSDT fff (v01 VBOX
0.000000] ACPI: FACS fff
0.000000] ACPI: APIC fff (v02 VBOX
0.000000] ACPI: SSDT fff02a0 001CC (v01 VBOX
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] No NUMA configuration found
0.000000] Faking a node at [mem 0x000003ffeffff]
0.000000] Initmem setup node 0 [mem 0xx3ffeffff]
NODE_DATA [mem 0x3ffec000-0x3ffeffff]
[ffffea-ffffea0000dfffff] PMD -& [ffff-ffff88003f3fffff] on node 0
0.000000] Zone ranges:
[mem 0xx00ffffff]
[mem 0xxffffffff]
0.000000] Movable zone start for each node
0.000000] Early memory node ranges
0: [mem 0xx0009efff]
0: [mem 0xx3ffeffff]
0.000000] On node 0 totalpages: 262015
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 3528 pages used for memmap
DMA32 zone: 254504 pages, LIFO batch:31
0.000000] ACPI: PM-Timer IO Port: 0x4008
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
0.000000] ACPI: IRQ0 used by override.
0.000000] ACPI: IRQ2 used by override.
0.000000] ACPI: IRQ9 used by override.
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
0.000000] nr_irqs_gsi: 40
0.000000] PM: Registered nosave memory: f000 - a0000
0.000000] PM: Registered nosave memory: a0000 - f0000
0.000000] PM: Registered nosave memory: f0000 - 0000
0.000000] e820: [mem 0xxfffbffff] available for PCI devices
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
0.000000] PERCPU: Embedded 28 pages/cpu @ffff8 s8 d22
0.000000] pcpu-alloc: s8 d22 alloc=1*2097152
0.000000] pcpu-alloc: [0] 0
0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 258425
0.000000] Policy zone: DMA32
0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7-trunk-amd64 root=UUID=-f942-4f77-b8b3- ro initrd=/install/gtk/initrd.gz quiet
0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
0.000000] __ex_table already sorted, skipping sort
0.000000] Checking aperture...
0.000000] No AGP bridge found
0.000000] Calgary: detecting Calgary via BIOS EBDA area
0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
0.000000] Memory: 48512k available (3588k kernel code, 452k absent, 37244k reserved, 3137k data, 616k init)
0.000000] Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
0.000000] NR_IRQS:33024 nr_irqs:256 16
0.000000] Console: colour VGA+ 80x25
0.000000] console [tty0] enabled
0.000000] tsc: Fast TSC calibration using PIT
0.000000] tsc: Detected
MHz processor
0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5046.13 BogoMIPS (lpj=)
0.004008] pid_max: default: 32768 minimum: 301
0.004054] Security Framework initialized
0.004060] AppArmor: AppArmor disabled by boot time parameter
0.004130] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
0.004333] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
0.004430] Mount-cache hash table entries: 256
0.004610] Initializing cgroup subsys cpuacct
0.004613] Initializing cgroup subsys memory
0.004623] Initializing cgroup subsys devices
0.004625] Initializing cgroup subsys freezer
0.004627] Initializing cgroup subsys net_cls
0.004629] Initializing cgroup subsys blkio
0.004631] Initializing cgroup subsys perf_event
0.004752] mce: CPU supports 0 MCE banks
0.004795] process: using mwait in idle threads
0.004805] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
0.004805] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
0.004805] tlb_flushall_shift: 6
0.008000] Freeing SMP alternatives: 8k freed
0.008822] ACPI: Core revision
0.016493] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.049103] smpboot: CPU0: Intel(R) Core(TM) i5 CPU
@ 2.53GHz (fam: 06, model: 25, stepping: 05)
0.052000] APIC calibration not consistent with PM-Timer: 113ms instead of 100ms
0.052000] APIC delta adjusted to PM-Timer: 77925)
0.052000] Performance Events: unsupported p6 CPU model 37 no PMU driver, software events only.
0.052000] Brought up 1 CPUs
0.052000] smpboot: Total of 1 processors activated (5046.13 BogoMIPS)
0.052000] NMI watchdog: disabled (cpu0): hardware events not enabled
0.052000] devtmpfs: initialized
0.052000] regulator-dummy: no parameters
0.052000] NET: Registered protocol family 16
0.052000] ACPI: bus type pci registered
0.052000] PCI: Using configuration type 1 for base access
0.052624] bio: create slab &bio-0& at 0
0.052689] ACPI: Added _OSI(Module Device)
0.052691] ACPI: Added _OSI(Processor Device)
0.052693] ACPI: Added _OSI(3.0 _SCP Extensions)
0.052695] ACPI: Added _OSI(Processor Aggregator Device)
0.053013] ACPI: EC: Look up EC in DSDT
0.053263] ACPI: Executed 1 blocks of module-level executable AML code
0.056867] ACPI: Interpreter enabled
0.056874] ACPI: (supports S0 S5)
0.056886] ACPI: Using IOAPIC for interrupt routing
0.058918] ACPI: No dock devices found.
0.058923] PCI: Ignoring host bridge windows from ACPI; if necessary, use &pci=use_crs& and report a bug
0.058986] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.059074] pci_root PNP0A03:00: host bridge window [io
0xcf7] (ignored)
0.059077] pci_root PNP0A03:00: host bridge window [io
0x0d00-0xffff] (ignored)
0.059079] pci_root PNP0A03:00: host bridge window [mem 0x000abffff] (ignored)
0.059081] pci_root PNP0A03:00: host bridge window [mem 0xxffdfffff] (ignored)
0.059084] PCI: root bus 00: using default resources
0.059087] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
0.059119] PCI host bridge to bus 0000:00
0.059123] pci_bus 0000:00: root bus resource [bus 00-ff]
0.059125] pci_bus 0000:00: root bus resource [io
0x0000-0xffff]
0.059127] pci_bus 0000:00: root bus resource [mem 0xxfffffffff]
0.059172] pci .0: [] type 00 class 0x060000
0.059553] pci .0: [] type 00 class 0x060100
0.060125] pci .1: [] type 00 class 0x01018a
0.060596] pci .1: reg 20: [io
0xd000-0xd00f]
0.060967] pci .0: [80ee:beef] type 00 class 0x030000
0.063097] pci .0: reg 10: [mem 0xexe1ffffff pref]
0.074137] pci .0: [e] type 00 class 0x020000
0.075414] pci .0: reg 10: [mem 0xfxf001ffff]
0.077801] pci .0: reg 18: [io
0xd010-0xd017]
0.083763] pci .0: [80ee:cafe] type 00 class 0x088000
0.085176] pci .0: reg 10: [io
0xd020-0xd03f]
0.086258] pci .0: reg 14: [mem 0xfxf07fffff]
0.087380] pci .0: reg 18: [mem 0xfxf0803fff pref]
0.091760] pci .0: [] type 00 class 0x040100
0.092016] pci .0: reg 10: [io
0xd100-0xd1ff]
0.092083] pci .0: reg 14: [io
0xd200-0xd23f]
0.092594] pci .0: [106b:003f] type 00 class 0x0c0310
0.093808] pci .0: reg 10: [mem 0xfxf0804fff]
0.100603] pci .0: [] type 00 class 0x068000
0.101252] pci b.0: [c] type 00 class 0x0c0320
0.101928] pci b.0: reg 10: [mem 0xfxf0805fff]
0.109856] pci d.0: [] type 00 class 0x010601
0.111200] pci d.0: reg 10: [io
0xd240-0xd247]
0.113826] pci d.0: reg 18: [io
0xd250-0xd257]
0.116204] pci d.0: reg 20: [io
0xd260-0xd26f]
0.117436] pci d.0: reg 24: [mem 0xfxf0807fff]
0.119161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
0.124172] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
0.124530] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
0.124684] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
0.124821] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
0.125167] vgaarb: device added: PCI:.0,decodes=io+mem,owns=io+mem,locks=
0.125182] vgaarb: loaded
0.125194] vgaarb: bridge control possible .0
0.125263] PCI: Using ACPI for IRQ routing
0.125274] PCI: pci_cache_line_size set to 64 bytes
0.125533] e820: reserve RAM buffer [mem 0xx0009ffff]
0.125543] e820: reserve RAM buffer [mem 0x3ffffffffff]
0.125705] Switching to clocksource refined-jiffies
0.127713] pnp: PnP ACPI init
0.127731] ACPI: bus type pnp registered
0.128000] pnp 00:00: [bus 00-ff]
0.128000] pnp 00:00: [io
0x0cf8-0x0cff]
0.128000] pnp 00:00: [io
0xcf7 window]
0.128000] pnp 00:00: [io
0x0d00-0xffff window]
0.128000] pnp 00:00: [mem 0x000abffff window]
0.128000] pnp 00:00: [mem 0xxffdfffff window]
0.128000] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
0.128000] pnp 00:01: [io
0.128000] pnp 00:01: [io
0.128000] pnp 00:01: [irq 1]
0.128000] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
0.128000] pnp 00:02: [io
0.128000] pnp 00:02: [io
0.128000] pnp 00:02: [io
0x00c0-0x00df]
0.128000] pnp 00:02: [dma 4]
0.128000] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
0.128030] pnp 00:03: [irq 12]
0.128054] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
0.128070] pnp 00:04: [io
0.128072] pnp 00:04: [io
0.128093] pnp 00:04: [irq 7]
0.128114] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
0.128642] pnp: PnP ACPI: found 5 devices
0.128644] ACPI: ACPI bus type pnp unregistered
0.135015] Switching to clocksource acpi_pm
0.135059] pci_bus 0000:00: resource 4 [io
0x0000-0xffff]
0.135061] pci_bus 0000:00: resource 5 [mem 0xxfffffffff]
0.135118] NET: Registered protocol family 2
0.135118] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
0.135263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
0.135617] TCP: Hash tables configured (established 131072 bind 65536)
0.135680] TCP: reno registered
0.135696] UDP hash table entries: 512 (order: 2, 16384 bytes)
0.135709] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
0.135803] NET: Registered protocol family 1
0.135826] pci .0: Limiting direct PCI/PCI transfers
0.135880] pci .0: Activating ISA DMA hang workarounds
0.135919] pci .0: Boot video device
0.136369] PCI: CLS 0 bytes, default 64
0.136440] Unpacking initramfs...
0.408317] Freeing initrd memory: 14216k freed
0.415784] platform rtc_cmos: registered platform RTC device (no PNP device found)
0.416162] audit: initializing netlink socket (disabled)
0.416162] type=2000 audit(.415:1): initialized
0.431387] HugeTLB registered 2 MB page size, pre-allocated 0 pages
0.431624] VFS: Disk quotas dquot_6.5.2
0.431641] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
0.431716] msgmni has been set to 2002
0.431901] alg: No test for stdrng (krng)
0.431919] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
0.431946] io scheduler noop registered
0.431948] io scheduler deadline registered
0.431952] io scheduler cfq registered (default)
0.432014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
0.432031] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
0.432032] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
0.432233] GHES: HEST is not enabled!
0.432293] Serial:
driver, 4 ports, IRQ sharing enabled
0.432598] Linux agpgart interface v0.103
0.432736] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
0.433786] serio: i8042 KBD port at 0x60,0x64 irq 1
0.433796] serio: i8042 AUX port at 0x60,0x64 irq 12
0.433905] mousedev: PS/2 mouse device common for all mice
0.434460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
0.435058] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
0.435135] rtc0: alarms up to one day, 114 bytes nvram
0.435144] cpuidle: using governor ladder
0.435146] cpuidle: using governor menu
0.435172] drop_monitor: Initializing network drop monitor service
0.435243] TCP: cubic registered
0.435257] NET: Registered protocol family 10
0.435434] mip6: Mobile IPv6
0.435436] NET: Registered protocol family 17
0.435616] PM: Hibernation image not present or could not be loaded.
0.435627] registered taskstats version 1
0.436303] rtc_cmos rtc_cmos: setting system clock to
17:55:40 UTC ()
0.437342] Freeing unused kernel memory: 616k freed
0.437445] Write protecting the kernel read-only data: 6144k
0.439012] Freeing unused kernel memory: 500k freed
0.440057] Freeing unused kernel memory: 556k freed
0.457606] udevd[50]: starting version 175
0.473691] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
0.473694] e1000: Copyright (c)
Intel Corporation.
0.473765] e:03.0: setting latency timer to 64
0.482212] ACPI: bus type usb registered
0.482243] usbcore: registered new interface driver usbfs
0.482252] usbcore: registered new interface driver hub
0.495108] SCSI subsystem initialized
0.496073] ACPI: bus type scsi registered
0.499343] usbcore: registered new device driver usb
0.499795] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
0.504593] microcode: CPU0 sig=0x20655, pf=0x1, revision=0x0
0.504625] platform microcode: firmware: agent loaded intel-ucode/06-25-05 into memory
0.812928] libata version 3.00 loaded.
0.814572] microcode: Microcode Update Driver: v2.00 &tigran@aivazian.fsnet.co.uk&, Peter Oruba
0.863574] e:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:41:4f:6a
0.863583] e:03.0 eth0: Intel(R) PRO/1000 Network Connection
0.863682] ehci_hcd b.0: setting latency timer to 64
0.863694] ehci_hcd b.0: EHCI Host Controller
0.863702] ehci_hcd b.0: new USB bus registered, assigned bus number 1
0.864138] ehci_hcd b.0: irq 19, io mem 0xf0805000
0.876221] ehci_hcd b.0: USB 2.0 started, EHCI 1.00
0.876261] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
0.876264] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
0.876266] usb usb1: Product: EHCI Host Controller
0.876268] usb usb1: Manufacturer: Linux 3.7-trunk-amd64 ehci_hcd
0.876270] usb usb1: SerialNumber: b.0
0.876393] hub 1-0:1.0: USB hub found
0.876398] hub 1-0:1.0: 8 ports detected
0.877323] ahci d.0: version 3.0
0.877649] ahci: SSS flag set, parallel bus scan disabled
0.877935] ahci d.0: AHCI
slots 1 ports 3 Gbps 0x1 impl SATA mode
0.877943] ahci d.0: flags: 64bit ncq stag only ccc
0.877987] ahci d.0: setting latency timer to 64
0.879775] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
0.881975] scsi0 : ahci
0.882129] ata1: SATA max UDMA/133 abar m06000 port 0xf0806100 irq 21
0.882361] ata_piix .1: version 2.13
0.882500] ata_piix .1: setting latency timer to 64
0.884745] scsi1 : ata_piix
0.885536] scsi2 : ata_piix
0.885589] ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
0.885595] ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
0.885801] ohci_hcd .0: setting latency timer to 64
0.885813] ohci_hcd .0: OHCI Host Controller
0.885822] ohci_hcd .0: new USB bus registered, assigned bus number 2
0.885891] ohci_hcd .0: irq 22, io mem 0xf0804000
0.940767] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
0.940775] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
0.940780] usb usb2: Product: OHCI Host Controller
0.940784] usb usb2: Manufacturer: Linux 3.7-trunk-amd64 ohci_hcd
0.940788] usb usb2: SerialNumber: .0
0.941106] hub 2-0:1.0: USB hub found
0.941227] hub 2-0:1.0: 8 ports detected
1.041512] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
1.042225] ata3.00: configured for UDMA/33
1.188291] usb 1-1: new high-speed USB device number 2 using ehci_hcd
1.200493] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
1.200827] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
1.200833] ata1.00:
sectors, multi 128: LBA48 NCQ (depth 31/32)
1.201941] ata1.00: configured for UDMA/133
1.202145] scsi 0:0:0:0: Direct-Access
VBOX HARDDISK
PQ: 0 ANSI: 5
1.203319] scsi 2:0:0:0: CD-ROM
PQ: 0 ANSI: 5
1.217453] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
1.217456] cdrom: Uniform CD-ROM driver Revision: 3.20
1.217763] sr 2:0:0:0: Attached scsi CD-ROM sr0
1.218468] sd 0:0:0:0: [sda] -byte logical blocks: (21.4 GB/20.0 GiB)
1.218502] sd 0:0:0:0: [sda] Write Protect is off
1.218504] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
1.218519] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
1.221244] sd 0:0:0:0: Attached scsi generic sg0 type 0
1.221313] sr 2:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 & sda5 &
1.248814] sd 0:0:0:0: [sda] Attached SCSI disk
1.412525] tsc: Refined TSC clocksource calibration:
1.412537] Switching to clocksource tsc
1.419473] usb 1-1: New USB device found, idVendor=0bda, idProduct=8178
1.419482] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1.419487] usb 1-1: Product: USB WLAN
1.419491] usb 1-1: Manufacturer: 802.11n
1.419494] usb 1-1: SerialNumber: 00e04c000001
1.535749] PM: Starting manual resume from disk
1.535757] PM: Hibernation image partition 8:5 present
1.535760] PM: Looking for hibernation image.
1.536390] PM: Image not found (code -22)
1.536395] PM: Hibernation image not present or could not be loaded.
1.563195] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
1.628373] usb 2-1: new full-speed USB device number 2 using ohci_hcd
1.874946] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
1.874955] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
1.874960] usb 2-1: Product: USB Tablet
1.874964] usb 2-1: Manufacturer: VirtualBox
5.730883] udevd[293]: starting version 175
6.399540] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
6.399549] ACPI: Power Button [PWRF]
6.399657] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
6.399662] ACPI: Sleep Button [SLPF]
6.400570] ACPI: AC Adapter [AC] (on-line)
7.778858] snd_intel8x0 .0: setting latency timer to 64
7.893088] parport_pc 00:04: reported by Plug and Play ACPI
8.044054] [drm] Initialized drm 1.1.0
8.051087] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
8.051089] [drm] No driver support for vblank timestamp query.
8.051091] [drm] Initialized vboxvideo 1.0.0
for .0 on minor 0
8.100091] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
8.108170] intel8x0_measure_ac97_clock: measured 53268 usecs (13433 samples)
8.108173] intel8x0: measured clock 252177 rejected
8.468406] intel8x0_measure_ac97_clock: measured 55571 usecs (12484 samples)
8.468411] intel8x0: measured clock 224649 rejected
8.828377] intel8x0_measure_ac97_clock: measured 55780 usecs (13443 samples)
8.828384] intel8x0: measured clock 241000 rejected
8.828388] intel8x0: clocking to 48000
8.830567] piix4_smbus .0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
8.839260] usbcore: registered new interface driver usbhid
8.839271] usbhid: USB HID core driver
8.844482] input: Unspecified device as /devices/pci0:00:04.0/input/input4
8.845354] vboxguest: major 0, IRQ 20, I/O port d020, MMIO at 0000 (size 0x400000)
8.845358] vboxguest: Successfully loaded version 4.3.4 (interface 0x)
8.887076] input: VirtualBox USB Tablet as /devices/pci0:00:06.0/usb2/2-1/2-1:1.0/input/input5
8.889745] hid-generic 0003:80EE:: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-.0-1/input0
8.918513] rtl8192cu driver version=v4.0.2_1
8.918553] build time: Dec
8.918598] usb_endpoint_descriptor(0):
8.918608] bLength=7
8.918616] bDescriptorType=5
8.918624] bEndpointAddress=81
8.918631] wMaxPacketSize=200
8.918638] bInterval=0
8.918645] RT_usb_endpoint_is_bulk_in = 1
8.918653] usb_endpoint_descriptor(1):
8.918661] bLength=7
8.918668] bDescriptorType=5
8.918672] bEndpointAddress=2
8.918674] wMaxPacketSize=200
8.918676] bInterval=0
8.918678] RT_usb_endpoint_is_bulk_out = 2
8.918680] usb_endpoint_descriptor(2):
8.918683] bLength=7
8.918685] bDescriptorType=5
8.918686] bEndpointAddress=3
8.918688] wMaxPacketSize=200
8.918690] bInterval=0
8.918692] RT_usb_endpoint_is_bulk_out = 3
8.918694] usb_endpoint_descriptor(3):
8.918696] bLength=7
8.918698] bDescriptorType=5
8.918700] bEndpointAddress=84
8.918702] wMaxPacketSize=40
8.918704] bInterval=1
8.918706] RT_usb_endpoint_is_int_in = 4, Interval = 1
8.918709] nr_endpoint=4, in_num=2, out_num=2
8.918711] USB_SPEED_HIGH
8.918724] CHIP TYPE: RTLC
8.918737] register rtw_netdev_ops to netdev_ops
8.946081] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_92C.
8.946088] RF_Type is 2!!
8.957599] EEPROM type is E-FUSE
8.957605] ====& ReadAdapterInfo8192C
8.966208] Boot from EFUSE, Autoload OK !
12.211615] EEPROMVID = 0x0bda
12.211620] EEPROMPID = 0x8178
12.211623] EEPROMCustomerID : 0x00
12.211625] EEPROMSubCustomerID: 0x00
12.211627] RT_CustomerID: 0x00
12.211631] _ReadMACAddress MAC Address from EFUSE = 64:66:b3:08:8c:bc
12.211635] EEPROMRegulatory = 0x0
12.211637] _ReadBoardType(0)
12.211640] BT Coexistance = disable
12.211642] mlmepriv.ChannelPlan = 0x02
12.211645] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
12.211648] ### PS params=&
power_mgnt(0),usbss_enable(0) ###
12.211650] ### AntDivCfg(0)
12.211652] readAdapterInfo_8192CU(): REPLACEMENT = 1
12.211656] &==== ReadAdapterInfo8192C in 3252 ms
12.211969] rtw_macaddr_cfg MAC Address
= 64:66:b3:08:8c:bc
12.211973] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
12.212821] _rtw_drv_register_netdev, MAC Address (if1) = 64:66:b3:08:8c:bc
12.213538] usbcore: registered new interface driver rtl8192cu
13.728567] Adding 901116k swap on /dev/sda5.
Priority:-1 extents:1 across:901116k
13.746175] EXT4-fs (sda1): re-mounted. Opts: (null)
14.337646] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
14.476289] loop: module loaded
23.295893] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
23.298605] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
23.300037] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
23.347952] rtw_wx_set_scan: bDriverStopped=1, bup=0, hw_init_completed=0
23.349496] +871x_drv - drv_open, bup=0
23.440097]
===& FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
23.440102] FirmwareDownload92C accquire FW from embedded image
23.440105] fw_ver=v88, fw_subver=2, sig=0x88c0
23.985861] fw download ok!
23.985869] Set RF Chip ID to RF_6052 and RF type to 2.
27.280468] vboxsf: Successfully loaded version 4.3.4 (interface 0x)
28.745781] IQK:Start!!!
29.016257] Path A IQK Success!!
29.107092] Path B IQK Success!!
29.325506] Path A IQK Success!!
29.415900] Path B IQK Success!!
29.539351] IQK: final_candidate is 0
29.539359] IQK: RegE94=fe RegE9C=3f4 RegEA4=fa RegEAC=0 RegEB4=100 RegEBC=7 RegEC4=f6 RegECC=1
29.539359]
Path A IQ Calibration Success !
29.590371] Path B IQ Calibration Success !
29.963027] pdmpriv-&TxPowerTrackControl = 1
30.089672] rtl8192cu_hal_init in 6744ms
30.241611] MAC Address = 64:66:b3:08:8c:bc
30.241942] -871x_drv - drv_open, bup=1
30.241995] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
30.242709] set_mode = IW_MODE_INFRA
30.272602] hw_var_set_opmode()-4234 mode = 2
30.356200] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
30.356210] set_mode = IW_MODE_INFRA
30.356300] =&rtw_wx_set_essid
30.356302] ssid=g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffc
d\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffff
b\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\x
ffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xfffff
f9a\xffffff9a, len=32
30.356304] Set SSID under fw_state=0x
30.356309] &=rtw_wx_set_essid, ret 0
30.359308] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
30.397996] hw_var_set_opmode()-4234 mode = 2
33.435436] survey done event(e) band:0 for wlan0
33.435450] rtw_select_and_join_from_scanned_queue: return _FAIL(candidate == NULL)
33.435453] try_to_join, but select scanning queue fail, to_roaming:0
36.442319] survey done event(12) band:0 for wlan0
36.595037] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
36.595044] set_mode = IW_MODE_ADHOC
36.595227] =&rtw_wx_set_essid
36.595229] ssid=Test, len=4
36.595231] Set SSID under fw_state=0x
36.595235] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-30
36.595238] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
36.595248] link to Broadcom AP
36.595250] &=rtw_wx_set_essid, ret 0
36.647363] hw_var_set_opmode()-4234 mode = 1
36.656355] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
37.044590] report_join_res(1)
37.044601] rtw_joinbss_update_network
37.044607] +rtw_update_ht_cap()
37.044611] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
37.044625] update raid entry, mask=0x6000000f, arg=0x81
37.053532] HW_VAR_BASIC_RATE: BrateCfg(0xd)
37.057787] report_add_sta_event: add STA
37.081481] WMM(0): 0, 10
37.084488] WMM(0): 0, 10
37.087385] WMM(0): 0, 10
37.090456] WMM(0): 0, 10
37.090463] HTOnAssocRsp
37.161897] report_add_sta_event: add STA
37.242530] =&mlmeext_joinbss_event_callback
37.242574] mlmeext_sta_add_event_callback
37.242613] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
37.248269] rtw_txframes_sta_ac_pending, psta-&state(0x0) != _FW_LINKED
37.248277] rtw_xmitframe_coalesce, psta-&state(0x0) != _FW_LINKED
37.289862] update raid entry, mask=0xfff, arg=0x82
37.672311] rtw_txframes_sta_ac_pending, psta-&state(0x0) != _FW_LINKED
37.672311] rtw_xmitframe_coalesce, psta-&state(0x0) != _FW_LINKED
37.692144] rtw_txframes_sta_ac_pending, psta-&state(0x0) != _FW_LINKED
37.692144] rtw_xmitframe_coalesce, psta-&state(0x0) != _FW_LINKED
38.160186] rtw_txframes_sta_ac_pending, psta-&state(0x0) != _FW_LINKED
38.160191] rtw_xmitframe_coalesce, psta-&state(0x0) != _FW_LINKED
39.160257] rtw_txframes_sta_ac_pending, psta-&state(0x0) != _FW_LINKED
39.160266] rtw_xmitframe_coalesce, psta-&state(0x0) != _FW_LINKED
43.168341] rtw_txframes_sta_ac_pending, psta-&state(0x0) != _FW_LINKED
43.168349] rtw_xmitframe_coalesce, psta-&state(0x0) != _FW_LINKED
44.872724] rtw_txframes_sta_ac_pending, psta-&state(0x0) != _FW_LINKED
44.872731] rtw_xmitframe_coalesce, psta-&state(0x0) != _FW_LINKED
44.960191] rtw_txframes_sta_ac_pending, psta-&state(0x0) != _FW_LINKED
44.960199] rtw_xmitframe_coalesce, psta-&state(0x0) != _FW_LINKED
47.176163] rtw_txframes_sta_ac_pending, psta-&state(0x0) != _FW_LINKED
47.176170] rtw_xmitframe_coalesce, psta-&state(0x0) != _FW_LINKED
58.089567] rtw_txframes_sta_ac_pending, psta-&state(0x0) != _FW_LINKED
58.089575] rtw_xmitframe_coalesce, psta-&state(0x0) != _FW_LINKED
65.898783] rtw_txframes_sta_ac_pending, psta-&state(0x0) != _FW_LINKED
65.898791] rtw_xmitframe_coalesce, psta-&state(0x0) != _FW_LINKED
72.999963] rtw_txframes_sta_ac_pending, psta-&state(0x0) != _FW_LINKED
72.999969] rtw_xmitframe_coalesce, psta-&state(0x0) != _FW_LINKED
83.206273] rtw_wx_set_mlme
83.206280] rtw_wx_set_mlme, cmd=0, reason=3
83.207320] set_mode = IW_MODE_INFRA
83.248273] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
83.391975] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
83.427833] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
83.581452] hw_var_set_opmode()-4234 mode = 2
86.008356] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
86.008371] set_mode = IW_MODE_ADHOC
86.008532] =&rtw_wx_set_essid
86.008537] ssid=Test, len=4
86.008543] Set SSID under fw_state=0x
86.008553] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-30
86.008559] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
86.008582] link to Broadcom AP
86.008590] &=rtw_wx_set_essid, ret 0
86.032721] hw_var_set_opmode()-4234 mode = 1
86.041633] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
86.395162] report_join_res(1)
86.395170] rtw_joinbss_update_network
86.395175] +rtw_update_ht_cap()
86.395178] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
86.518463] update raid entry, mask=0x6000000f, arg=0x81
86.527298] HW_VAR_BASIC_RATE: BrateCfg(0xd)
86.551334] WMM(0): 0, 10
86.554344] WMM(0): 0, 10
86.557307] WMM(0): 0, 10
86.560418] WMM(0): 0, 10
86.560423] HTOnAssocRsp
86.704968] =&mlmeext_joinbss_event_callback
97.016308] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
97.016323] set_mode = IW_MODE_ADHOC
97.016478] =&rtw_wx_set_essid
97.016482] ssid=Test, len=4
97.016489] Set SSID under fw_state=0x
97.016497] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-30
97.016503] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
97.016525] link to Broadcom AP
97.016532] &=rtw_wx_set_essid, ret 0
97.047253] hw_var_set_opmode()-4234 mode = 1
97.056257] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
97.410091] report_join_res(1)
97.410100] rtw_joinbss_update_network
97.410104] +rtw_update_ht_cap()
97.410107] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
97.410118] update raid entry, mask=0x6000000f, arg=0x81
97.419181] HW_VAR_BASIC_RATE: BrateCfg(0xd)
97.443152] WMM(0): 0, 10
97.446044] WMM(0): 0, 10
97.448940] WMM(0): 0, 10
97.451896] WMM(0): 0, 10
97.451901] HTOnAssocRsp
97.596231] =&mlmeext_joinbss_event_callback
108.025373] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
108.025385] set_mode = IW_MODE_ADHOC
108.025513] =&rtw_wx_set_essid
108.025517] ssid=Test, len=4
108.025522] Set SSID under fw_state=0x
108.025529] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-30
108.025534] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
108.025551] link to Broadcom AP
108.025556] &=rtw_wx_set_essid, ret 0
108.059475] hw_var_set_opmode()-4234 mode = 1
108.068895] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
108.433938] report_join_res(1)
108.433947] rtw_joinbss_update_network
108.433952] +rtw_update_ht_cap()
108.433955] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
108.535740] update raid entry, mask=0x6000000f, arg=0x81
108.544509] HW_VAR_BASIC_RATE: BrateCfg(0xd)
108.568569] WMM(0): 0, 10
108.573457] WMM(0): 0, 10
108.576480] WMM(0): 0, 10
108.579405] WMM(0): 0, 10
108.579412] HTOnAssocRsp
108.724024] =&mlmeext_joinbss_event_callback
111.004122] set_mode = IW_MODE_INFRA
111.059349] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
111.218356] hw_var_set_opmode()-4234 mode = 2
114.010046] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
114.010057] set_mode = IW_MODE_ADHOC
114.010179] =&rtw_wx_set_essid
114.010183] ssid=Test, len=4
114.010188] Set SSID under fw_state=0x
114.010196] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-30
114.010200] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
114.010214] link to Broadcom AP
114.010219] &=rtw_wx_set_essid, ret 0
114.030711] hw_var_set_opmode()-4234 mode = 1
114.039540] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
114.391012] report_join_res(1)
114.391021] rtw_joinbss_update_network
114.391025] +rtw_update_ht_cap()
114.391028] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
114.391040] update raid entry, mask=0x6000000f, arg=0x81
114.399787] HW_VAR_BASIC_RATE: BrateCfg(0xd)
114.423626] WMM(0): 0, 10
114.426668] WMM(0): 0, 10
114.429430] WMM(0): 0, 10
114.432442] WMM(0): 0, 10
114.432447] HTOnAssocRsp
114.583088] =&mlmeext_joinbss_event_callback
125.015899] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
125.015910] set_mode = IW_MODE_ADHOC
125.016037] =&rtw_wx_set_essid
125.016041] ssid=Test, len=4
125.016046] Set SSID under fw_state=0x
125.016054] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-30
125.016058] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
125.016076] link to Broadcom AP
125.016081] &=rtw_wx_set_essid, ret 0
125.032863] hw_var_set_opmode()-4234 mode = 1
125.041957] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
125.390149] report_join_res(1)
125.390158] rtw_joinbss_update_network
125.390162] +rtw_update_ht_cap()
125.390165] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
125.390177] update raid entry, mask=0x6000000f, arg=0x81
125.398889] HW_VAR_BASIC_RATE: BrateCfg(0xd)
125.422772] WMM(0): 0, 10
125.425972] WMM(0): 0, 10
125.428819] WMM(0): 0, 10
125.431776] WMM(0): 0, 10
125.431782] HTOnAssocRsp
125.576185] =&mlmeext_joinbss_event_callback
136.022556] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
136.022570] set_mode = IW_MODE_ADHOC
136.022707] =&rtw_wx_set_essid
136.022711] ssid=Test, len=4
136.022716] Set SSID under fw_state=0x
136.022723] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-30
136.022728] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
136.022745] link to Broadcom AP
136.022750] &=rtw_wx_set_essid, ret 0
136.051980] hw_var_set_opmode()-4234 mode = 1
136.060844] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
136.409598] report_join_res(1)
136.409607] rtw_joinbss_update_network
136.409611] +rtw_update_ht_cap()
136.409614] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
136.409625] update raid entry, mask=0x6000000f, arg=0x81
136.418530] HW_VAR_BASIC_RATE: BrateCfg(0xd)
136.442345] WMM(0): 0, 10
136.445225] WMM(0): 0, 10
136.448329] WMM(0): 0, 10
136.451201] WMM(0): 0, 10
136.451206] HTOnAssocRsp
136.595783] =&mlmeext_joinbss_event_callback
139.005056] set_mode = IW_MODE_INFRA
139.044637] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
139.213265] hw_var_set_opmode()-4234 mode = 2
142.007566] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
142.007577] set_mode = IW_MODE_ADHOC
142.007699] =&rtw_wx_set_essid
142.007703] ssid=Test, len=4
142.007708] Set SSID under fw_state=0x
142.007715] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-30
142.007720] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
142.007734] link to Broadcom AP
142.007738] &=rtw_wx_set_essid, ret 0
142.027679] hw_var_set_opmode()-4234 mode = 1
142.036633] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
142.396290] report_join_res(1)
142.396298] rtw_joinbss_update_network
142.396303] +rtw_update_ht_cap()
142.396306] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
142.480882] update raid entry, mask=0x6000000f, arg=0x81
142.489810] HW_VAR_BASIC_RATE: BrateCfg(0xd)
142.519754] WMM(0): 0, 10
142.522817] WMM(0): 0, 10
142.525563] WMM(0): 0, 10
142.528540] WMM(0): 0, 10
142.528545] HTOnAssocRsp
142.672985] =&mlmeext_joinbss_event_callback
144.361872] survey done event(15) band:0 for wlan0
149.024212] rtw_scan_timeout_handler(wlan0) fw_state=20
153.011352] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
153.011364] set_mode = IW_MODE_ADHOC
153.011487] =&rtw_wx_set_essid
153.011491] ssid=Test, len=4
153.011496] Set SSID under fw_state=0x
153.011504] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-30
153.011508] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
153.011525] link to Broadcom AP
153.011530] &=rtw_wx_set_essid, ret 0
153.049607] hw_var_set_opmode()-4234 mode = 1
153.061103] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
153.417049] report_join_res(1)
153.417057] rtw_joinbss_update_network
153.417062] +rtw_update_ht_cap()
153.417065] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
153.417076] update raid entry, mask=0x6000000f, arg=0x81
153.426019] HW_VAR_BASIC_RATE: BrateCfg(0xd)
153.450015] WMM(0): 0, 10
153.452994] WMM(0): 0, 10
153.455995] WMM(0): 0, 10
153.458998] WMM(0): 0, 10
153.459003] HTOnAssocRsp
153.604838] =&mlmeext_joinbss_event_callback
164.014086] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
164.014093] set_mode = IW_MODE_ADHOC
164.014159] =&rtw_wx_set_essid
164.014161] ssid=Test, len=4
164.014163] Set SSID under fw_state=0x
164.014167] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-30
164.014170] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
164.014179] link to Broadcom AP
164.014182] &=rtw_wx_set_essid, ret 0
164.029554] hw_var_set_opmode()-4234 mode = 1
164.038722] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
164.439522] report_join_res(1)
164.439527] rtw_joinbss_update_network
164.439530] +rtw_update_ht_cap()
164.439531] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
164.439539] update raid entry, mask=0x6000000f, arg=0x81
164.448520] HW_VAR_BASIC_RATE: BrateCfg(0xd)
164.479484] WMM(0): 0, 10
164.482496] WMM(0): 0, 10
164.485447] WMM(0): 0, 10
164.488496] WMM(0): 0, 10
164.488501] HTOnAssocRsp
164.655511] =&mlmeext_joinbss_event_callback
167.001907] set_mode = IW_MODE_INFRA
167.032322] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
167.191631] hw_var_set_opmode()-4234 mode = 2
170.956792] ==&rtw_ps_processor .fw_state(8)
170.956795] ==&ips_enter cnts:1
170.956796] ===& rtw_ips_pwr_down...................
170.984181] ====& rtw_ips_dev_unload...
171.005374] _rtw_pwr_wakeup wait ps_processing...
171.083289] VBoxGuest: VBoxGuestCommonGuestCapsAcquire: pSession(0xffff0), OR(0x0), NOT(0xffffffff), flags(0x0)
171.108998] VBoxGuest: VBoxGuestCommonGuestCapsAcquire: pSession(0xffff0), OR(0x0), NOT(0xffffffff), flags(0x0)
171.129095] VBoxGuest: VBoxGuestCommonGuestCapsAcquire: pSession(0xffff0), OR(0x0), NOT(0xffffffff), flags(0x0)
171.132295] VBoxGuest: VBoxGuestCommonGuestCapsAcquire: pSession(0xffff0), OR(0x0), NOT(0xffffffff), flags(0x0)
171.136675] VBoxGuest: VBoxGuestCommonGuestCapsAcquire: pSession(0xffff0), OR(0x0), NOT(0xffffffff), flags(0x0)
171.448299] usb_read_port_cancel
171.448299] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
171.452018] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
171.452190] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
171.452265] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
171.452304] usb_write_port_cancel
171.452324] ==& rtl8192cu_hal_deinit
171.452326] bkeepfwalive(0)
171.452327] card disble without HWSM...........
171.571136] &=== rtw_ips_pwr_down..................... in 612ms
171.576152] _rtw_pwr_wakeup wait ps_processing done
171.576158] _rtw_pwr_wakeup call ips_leave....
171.576162] ==&ips_leave cnts:1
171.576164] ===&
rtw_ips_pwr_up..............
171.576169] ===& ips_netdrv_open.........
171.661642]
===& FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
171.661651] FirmwareDownload92C accquire FW from embedded image
171.661655] fw_ver=v88, fw_subver=2, sig=0x88c0
172.778369] fw download ok!
172.778376] Set RF Chip ID to RF_6052 and RF type to 2.
178.283362] IQK:Start!!!
178.577443] Path A IQK Success!!
178.667544] Path B IQK Success!!
178.894330] Path A IQK Success!!
179.047042] Path B IQK Success!!
179.191247] IQK: final_candidate is 0
179.191255] IQK: RegE94=fe RegE9C=3f4 RegEA4=f9 RegEAC=1 RegEB4=100 RegEBC=6 RegEC4=f5 RegECC=1
179.191255]
Path A IQ Calibration Success !
179.250170] Path B IQ Calibration Success !
179.772897] pdmpriv-&TxPowerTrackControl = 1
180.020101] rtl8192cu_hal_init in 8444ms
180.185652] &===
rtw_ips_pwr_up.............. in 8608ms
180.188352] ==& ips_leave.....LED(0x)...
183.733898] survey done event(0) band:0 for wlan0
184.352267] ==&rtw_ps_processor .fw_state(8)
184.352273] ==&ips_enter cnts:2
184.352276] ===& rtw_ips_pwr_down...................
184.357931] ====& rtw_ips_dev_unload...
184.384055] usb_read_port_cancel
184.390924] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
184.390932] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
184.391167] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
184.391270] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
184.391315] usb_write_port_cancel
184.391338] ==& rtl8192cu_hal_deinit
184.391341] bkeepfwalive(0)
184.391343] card disble without HWSM...........
184.509351] &=== rtw_ips_pwr_down..................... in 156ms
194.572852] VBoxGuest: VBoxGuestCommonGuestCapsAcquire: pSession(0xffff8), OR(0x0), NOT(0xffffffff), flags(0x0)
227.533442] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
227.533452] _rtw_pwr_wakeup call ips_leave....
227.533455] ==&ips_leave cnts:2
227.533456] ===&
rtw_ips_pwr_up..............
227.533462] ===& ips_netdrv_open.........
227.648804]
===& FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
227.648813] FirmwareDownload92C accquire FW from embedded image
227.648817] fw_ver=v88, fw_subver=2, sig=0x88c0
228.216383] fw download ok!
228.216392] Set RF Chip ID to RF_6052 and RF type to 2.
232.778957] IQK:Start!!!
233.045466] Path A IQK Success!!
233.137206] Path B IQK Success!!
233.320197] Path A IQK Success!!
233.413491] Path B IQK Success!!
233.528498] IQK: final_candidate is 0
233.528504] IQK: RegE94=fe RegE9C=3f5 RegEA4=fa RegEAC=3ff RegEB4=101 RegEBC=7 RegEC4=f5 RegECC=0
233.528504]
Path A IQ Calibration Success !
233.579795] Path B IQ Calibration Success !
233.939003] pdmpriv-&TxPowerTrackControl = 1
234.050037] rtl8192cu_hal_init in 6516ms
234.196018] &===
rtw_ips_pwr_up.............. in 6660ms
234.198383] ==& ips_leave.....LED(0x)...
234.198391] set_mode = IW_MODE_ADHOC
234.201465] =&rtw_wx_set_essid
234.201472] ssid=Test, len=4
234.201479] Set SSID under fw_state=0x
234.201490] &=rtw_wx_set_essid, ret 0
234.220800] hw_var_set_opmode()-4234 mode = 1
234.275100] rtw_wx_get_rts, rts_thresh=2347
234.275104] rtw_wx_get_frag, frag_len=2346
234.602545] Drop duplicate management frame with seq_num = 469.
234.605386] Drop duplicate management frame with seq_num = 469.
234.609342] Drop duplicate management frame with seq_num = 469.
234.622329] Drop duplicate management frame with seq_num = 469.
234.651240] Drop duplicate management frame with seq_num = 469.
237.106139] survey done event(11) band:0 for wlan0
237.106157] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-32
237.106162] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
237.106187] link to Broadcom AP
237.109197] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
237.490708] report_join_res(1)
237.490716] rtw_joinbss_update_network
237.490721] +rtw_update_ht_cap()
237.490724] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
237.490735] update raid entry, mask=0x6000000f, arg=0x81
237.499691] HW_VAR_BASIC_RATE: BrateCfg(0xd)
237.501056] set_mode = IW_MODE_INFRA
237.536207] WMM(0): 0, 10
237.539186] WMM(0): 0, 10
237.542346] WMM(0): 0, 10
237.545211] WMM(0): 0, 10
237.545216] HTOnAssocRsp
237.693251] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
237.716310] SetFwRsvdPagePkt
237.716334] Set RSVD page location to Fw.
237.745913] =&mlmeext_joinbss_event_callback
237.776371] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
237.949693] hw_var_set_opmode()-4234 mode = 2
238.749899] rtw_wx_get_rts, rts_thresh=2347
238.749899] rtw_wx_get_frag, frag_len=2346
240.224287] ==&rtw_ps_processor .fw_state(8)
240.224293] ==&ips_enter cnts:3
240.224296] ===& rtw_ips_pwr_down...................
240.249641] ====& rtw_ips_dev_unload...
240.612280] usb_read_port_cancel
240.619412] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
240.619465] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
240.619505] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
240.619544] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
240.619568] usb_write_port_cancel
240.619585] ==& rtl8192cu_hal_deinit
240.619586] bkeepfwalive(0)
240.619587] card disble without HWSM...........
240.762645] &=== rtw_ips_pwr_down..................... in 536ms
242.253301] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
242.253310] _rtw_pwr_wakeup call ips_leave....
242.253312] ==&ips_leave cnts:3
242.253313] ===&
rtw_ips_pwr_up..............
242.253316] ===& ips_netdrv_open.........
242.360540]
===& FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
242.360547] FirmwareDownload92C accquire FW from embedded image
242.360552] fw_ver=v88, fw_subver=2, sig=0x88c0
242.917968] fw download ok!
242.917974] Set RF Chip ID to RF_6052 and RF type to 2.
247.167494] IQK:Start!!!
247.430907] Path A IQK Success!!
247.524698] Path B IQK Success!!
247.706495] Path A IQK Success!!
247.797892] Path B IQK Success!!
248.091758] Path A IQK Success!!
248.182890] Path B IQK Success!!
248.298537] IQK: final_candidate is 0
248.298545] IQK: RegE94=fe RegE9C=3f4 RegEA4=f9 RegEAC=0 RegEB4=100 RegEBC=7 RegEC4=f6 RegECC=1
248.298545]
Path A IQ Calibration Success !
248.350957] Path B IQ Calibration Success !
248.704187] pdmpriv-&TxPowerTrackControl = 1
248.818618] rtl8192cu_hal_init in 6568ms
248.973704] &===
rtw_ips_pwr_up.............. in 6724ms
248.976555] ==& ips_leave.....LED(0x)...
248.976560] set_mode = IW_MODE_ADHOC
248.977398] =&rtw_wx_set_essid
248.977403] ssid=Test, len=4
248.977409] Set SSID under fw_state=0x
248.977416] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-32
248.977421] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
248.977442] link to Broadcom AP
248.977446] &=rtw_wx_set_essid, ret 0
248.992659] hw_var_set_opmode()-4234 mode = 1
249.001562] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
249.353963] report_join_res(1)
249.353972] rtw_joinbss_update_network
249.353977] +rtw_update_ht_cap()
249.353979] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
249.353991] update raid entry, mask=0x6000000f, arg=0x81
249.363065] HW_VAR_BASIC_RATE: BrateCfg(0xd)
249.386992] WMM(0): 0, 10
249.389783] WMM(0): 0, 10
249.392798] WMM(0): 0, 10
249.395801] WMM(0): 0, 10
249.395806] HTOnAssocRsp
249.541605] =&mlmeext_joinbss_event_callback
259.988134] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
259.988145] set_mode = IW_MODE_ADHOC
259.988260] =&rtw_wx_set_essid
259.988260] ssid=Test, len=4
259.988260] Set SSID under fw_state=0x
259.988260] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-32
259.988260] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
259.988260] link to Broadcom AP
259.988260] &=rtw_wx_set_essid, ret 0
260.039003] hw_var_set_opmode()-4234 mode = 1
260.048332] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
260.407999] report_join_res(1)
260.408008] rtw_joinbss_update_network
260.408012] +rtw_update_ht_cap()
260.408015] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
260.503406] update raid entry, mask=0x6000000f, arg=0x81
260.513044] HW_VAR_BASIC_RATE: BrateCfg(0xd)
260.536977] WMM(0): 0, 10
260.539915] WMM(0): 0, 10
260.543044] WMM(0): 0, 10
260.545966] WMM(0): 0, 10
260.545971] HTOnAssocRsp
260.691336] =&mlmeext_joinbss_event_callback
268.004340] set_mode = IW_MODE_INFRA
268.052032] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
268.210925] hw_var_set_opmode()-4234 mode = 2
271.016221] ==&rtw_ps_processor .fw_state(8)
271.016227] ==&ips_enter cnts:4
271.016230] ===& rtw_ips_pwr_down...................
271.043328] ====& rtw_ips_dev_unload...
271.074116] usb_read_port_cancel
271.074189] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
271.074197] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
271.074326] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
271.074442] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
271.074492] usb_write_port_cancel
271.074516] ==& rtl8192cu_hal_deinit
271.074519] bkeepfwalive(0)
271.074521] card disble without HWSM...........
271.191579] &=== rtw_ips_pwr_down..................... in 172ms
311.006132] _rtw_pwr_wakeup call ips_leave....
311.006139] ==&ips_leave cnts:4
311.006142] ===&
rtw_ips_pwr_up..............
311.006149] ===& ips_netdrv_open.........
311.108544]
===& FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
311.108553] FirmwareDownload92C accquire FW from embedded image
311.108557] fw_ver=v88, fw_subver=2, sig=0x88c0
311.654869] fw download ok!
311.654877] Set RF Chip ID to RF_6052 and RF type to 2.
315.725812] IQK:Start!!!
315.990978] Path A IQK Success!!
316.086045] Path B IQK Success!!
316.270848] Path A IQK Success!!
316.360872] Path B IQK Success!!
316.640291] Path A IQK Success!!
316.730079] Path B IQK Success!!
316.843846] IQK: final_candidate is 0
316.843854] IQK: RegE94=fd RegE9C=3f5 RegEA4=fa RegEAC=0 RegEB4=101 RegEBC=8 RegEC4=f6 RegECC=0
316.843854]
Path A IQ Calibration Success !
316.895203] Path B IQ Calibration Success !
317.252370] pdmpriv-&TxPowerTrackControl = 1
317.363987] rtl8192cu_hal_init in 6356ms
317.510766] &===
rtw_ips_pwr_up.............. in 6504ms
317.513698] ==& ips_leave.....LED(0x)...
320.207818] survey done event(10) band:0 for wlan0
361.550040] Drop duplicate management frame with seq_num = 1838.
361.942666] Drop duplicate management frame with seq_num = 1844.
363.695944] survey done event(e) band:0 for wlan0
421.381150] Drop duplicate management frame with seq_num = 2485.
421.391660] Drop duplicate management frame with seq_num = 2485.
421.406634] Drop duplicate management frame with seq_num = 2485.
423.818333] survey done event(d) band:0 for wlan0
452.819723] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
452.819731] set_mode = IW_MODE_ADHOC
452.819804] =&rtw_wx_set_essid
452.819805] ssid=Test, len=4
452.819808] Set SSID under fw_state=0x
452.819812] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-30
452.819814] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
452.819824] link to Broadcom AP
452.819826] &=rtw_wx_set_essid, ret 0
452.954106] hw_var_set_opmode()-4234 mode = 1
452.962954] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
453.329012] report_join_res(1)
453.329021] rtw_joinbss_update_network
453.329026] +rtw_update_ht_cap()
453.329029] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
453.329040] update raid entry, mask=0x6000000f, arg=0x81
453.337958] HW_VAR_BASIC_RATE: BrateCfg(0xd)
453.361969] WMM(0): 0, 10
453.364919] WMM(0): 0, 10
453.367936] WMM(0): 0, 10
453.370912] WMM(0): 0, 10
453.370918] HTOnAssocRsp
453.516584] =&mlmeext_joinbss_event_callback
456.830086] rtw_wx_get_rts, rts_thresh=2347
456.830116] rtw_wx_get_frag, frag_len=2346
462.184675] set_mode = IW_MODE_INFRA
462.320828] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
462.376195] hrtimer: interrupt took 4970007 ns
462.712749] hw_var_set_opmode()-4234 mode = 2
464.701980] rtw_wx_get_rts, rts_thresh=2347
464.701980] rtw_wx_get_frag, frag_len=2346
483.671715] survey done event(c) band:0 for wlan0
541.468163] Drop duplicate management frame with seq_num = 3766.
541.470999] Drop duplicate management frame with seq_num = 3766.
541.475629] Drop duplicate management frame with seq_num = 3766.
544.059753] survey done event(11) band:0 for wlan0
568.012099] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
568.012099] set_mode = IW_MODE_ADHOC
568.012099] =&rtw_wx_set_essid
568.012099] ssid=Test, len=4
568.012099] Set SSID under fw_state=0x
568.012099] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-28
568.012099] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
568.012099] link to Broadcom AP
568.012099] &=rtw_wx_set_essid, ret 0
568.068077] hw_var_set_opmode()-4234 mode = 1
568.077022] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
568.436790] report_join_res(1)
568.436799] rtw_joinbss_update_network
568.436805] +rtw_update_ht_cap()
568.436809] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
568.436828] update raid entry, mask=0x6000000f, arg=0x81
568.445908] HW_VAR_BASIC_RATE: BrateCfg(0xd)
568.469935] WMM(0): 0, 10
568.472609] WMM(0): 0, 10
568.475534] WMM(0): 0, 10
568.478411] WMM(0): 0, 10
568.478413] HTOnAssocRsp
568.625260] =&mlmeext_joinbss_event_callback
579.030423] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
579.030434] set_mode = IW_MODE_ADHOC
579.030555] =&rtw_wx_set_essid
579.030558] ssid=Test, len=4
579.030564] Set SSID under fw_state=0x
579.030571] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-28
579.030576] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
579.030591] link to Broadcom AP
579.030596] &=rtw_wx_set_essid, ret 0
579.225766] hw_var_set_opmode()-4234 mode = 1
579.234662] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
579.595534] report_join_res(1)
579.595543] rtw_joinbss_update_network
579.595548] +rtw_update_ht_cap()
579.595550] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
579.595562] update raid entry, mask=0x6000000f, arg=0x81
579.604853] HW_VAR_BASIC_RATE: BrateCfg(0xd)
579.628877] WMM(0): 0, 10
579.631833] WMM(0): 0, 10
579.635067] WMM(0): 0, 10
579.637777] WMM(0): 0, 10
579.637783] HTOnAssocRsp
579.784087] =&mlmeext_joinbss_event_callback
590.042219] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
590.042230] set_mode = IW_MODE_ADHOC
590.042349] =&rtw_wx_set_essid
590.042353] ssid=Test, len=4
590.042358] Set SSID under fw_state=0x
590.042365] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-28
590.042370] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
590.042384] link to Broadcom AP
590.042389] &=rtw_wx_set_essid, ret 0
590.073201] hw_var_set_opmode()-4234 mode = 1
590.084404] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
590.435805] report_join_res(1)
590.435814] rtw_joinbss_update_network
590.435818] +rtw_update_ht_cap()
590.435821] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
590.435833] update raid entry, mask=0x6000000f, arg=0x81
590.444832] HW_VAR_BASIC_RATE: BrateCfg(0xd)
590.469195] WMM(0): 0, 10
590.472441] WMM(0): 0, 10
590.475178] WMM(0): 0, 10
590.478191] WMM(0): 0, 10
590.478197] HTOnAssocRsp
590.625632] =&mlmeext_joinbss_event_callback
593.003298] set_mode = IW_MODE_INFRA
593.046616] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
593.220011] hw_var_set_opmode()-4234 mode = 2
596.019983] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
596.019991] set_mode = IW_MODE_ADHOC
596.020068] =&rtw_wx_set_essid
596.020069] ssid=Test, len=4
596.020072] Set SSID under fw_state=0x
596.020076] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-28
596.020078] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
596.020088] link to Broadcom AP
596.020090] &=rtw_wx_set_essid, ret 0
596.073455] hw_var_set_opmode()-4234 mode = 1
596.082439] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
596.441488] report_join_res(1)
596.441496] rtw_joinbss_update_network
596.441501] +rtw_update_ht_cap()
596.441503] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
596.441515] update raid entry, mask=0x6000000f, arg=0x81
596.450294] HW_VAR_BASIC_RATE: BrateCfg(0xd)
596.474142] WMM(0): 0, 10
596.477081] WMM(0): 0, 10
596.480367] WMM(0): 0, 10
596.483233] WMM(0): 0, 10
596.483240] HTOnAssocRsp
596.630944] =&mlmeext_joinbss_event_callback
607.028791] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
607.028800] set_mode = IW_MODE_ADHOC
607.028893] =&rtw_wx_set_essid
607.028895] ssid=Test, len=4
607.028897] Set SSID under fw_state=0x
607.028901] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-28
607.028903] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
607.028913] link to Broadcom AP
607.028917] &=rtw_wx_set_essid, ret 0
607.061080] hw_var_set_opmode()-4234 mode = 1
607.070024] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
607.429335] report_join_res(1)
607.429344] rtw_joinbss_update_network
607.429348] +rtw_update_ht_cap()
607.429351] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
607.551034] update raid entry, mask=0x6000000f, arg=0x81
607.559882] HW_VAR_BASIC_RATE: BrateCfg(0xd)
607.583960] WMM(0): 0, 10
607.587020] WMM(0): 0, 10
607.592121] WMM(0): 0, 10
607.596539] WMM(0): 0, 10
607.596545] HTOnAssocRsp
607.741374] =&mlmeext_joinbss_event_callback
618.038857] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
618.038872] set_mode = IW_MODE_ADHOC
618.039033] =&rtw_wx_set_essid
618.039039] ssid=Test, len=4
618.039046] Set SSID under fw_state=0x
618.039055] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-28
618.039061] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
618.039090] link to Broadcom AP
618.039097] &=rtw_wx_set_essid, ret 0
618.072639] hw_var_set_opmode()-4234 mode = 1
618.087838] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
618.443209] report_join_res(1)
618.443218] rtw_joinbss_update_network
618.443223] +rtw_update_ht_cap()
618.443226] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
618.443238] update raid entry, mask=0x6000000f, arg=0x81
618.452208] HW_VAR_BASIC_RATE: BrateCfg(0xd)
618.477450] WMM(0): 0, 10
618.480514] WMM(0): 0, 10
618.483381] WMM(0): 0, 10
618.486507] WMM(0): 0, 10
618.486513] HTOnAssocRsp
618.630973] =&mlmeext_joinbss_event_callback
621.002729] set_mode = IW_MODE_INFRA
621.042990] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
621.217357] hw_var_set_opmode()-4234 mode = 2
621.871957] rtw_wx_get_rts, rts_thresh=2347
621.871957] rtw_wx_get_frag, frag_len=2346
624.015326] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
624.015338] set_mode = IW_MODE_ADHOC
624.015458] =&rtw_wx_set_essid
624.015462] ssid=Test, len=4
624.015467] Set SSID under fw_state=0x
624.015475] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-28
624.015479] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
624.015494] link to Broadcom AP
624.015499] &=rtw_wx_set_essid, ret 0
624.039189] hw_var_set_opmode()-4234 mode = 1
624.048233] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
624.410549] report_join_res(1)
624.410559] rtw_joinbss_update_network
624.410564] +rtw_update_ht_cap()
624.410568] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
624.410582] update raid entry, mask=0x6000000f, arg=0x81
624.419473] HW_VAR_BASIC_RATE: BrateCfg(0xd)
624.448822] WMM(0): 0, 10
624.451477] WMM(0): 0, 10
624.454144] WMM(0): 0, 10
624.457351] WMM(0): 0, 10
624.457358] HTOnAssocRsp
624.612133] =&mlmeext_joinbss_event_callback
625.110389] set_mode = IW_MODE_INFRA
625.112019] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
625.112019] set_mode = IW_MODE_ADHOC
625.112019] =&rtw_wx_set_essid
625.112019] ssid=Test, len=4
625.112019] Set SSID under fw_state=0x
625.112019] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-28
625.112019] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
625.112019] link to Broadcom AP
625.112019] &=rtw_wx_set_essid, ret 0
625.153481] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
625.324776] hw_var_set_opmode()-4234 mode = 2
625.348221] hw_var_set_opmode()-4234 mode = 1
625.357281] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
625.719429] report_join_res(1)
625.719437] rtw_joinbss_update_network
625.719442] +rtw_update_ht_cap()
625.719445] rtw_update_ht_cap(): WLAN_HT_CAP_SM_PS_STATIC
625.816200] update raid entry, mask=0x6000000f, arg=0x81
625.826856] HW_VAR_BASIC_RATE: BrateCfg(0xd)
625.850660] WMM(0): 0, 10
625.853699] WMM(0): 0, 10
625.856630] WMM(0): 0, 10
625.859624] WMM(0): 0, 10
625.859632] HTOnAssocRsp
626.003659] =&mlmeext_joinbss_event_callback
626.372012] rtw_wx_get_rts, rts_thresh=2347
626.372015] rtw_wx_get_frag, frag_len=2346
636.124975] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
636.124983] set_mode = IW_MODE_ADHOC
636.125074] =&rtw_wx_set_essid
636.125075] ssid=Test, len=4
636.125078] Set SSID under fw_state=0x
636.125082] [by_bssid:0][assoc_ssid:Test][to_roaming:0] new candidate: Test(3a:5c:34:9e:19:b2, ch1) rssi:-28
636.125084] rtw_select_and_join_from_scanned_queue: candidate: Test(3a:5c:34:9e:19:b2, ch:1)
636.125093] link to Broadcom AP
636.125096] &=rtw_wx_set_essid, ret 0
636.159211] hw_var_set_opmode()-4234 mode =