请问Wonitor CD Users Guidefor L2061 Wide是联想电脑中的什么光盘_百度知道
请问Wonitor CD Users Guidefor L2061 Wide是联想电脑中的什么光盘
我有更好的答案
尊敬的用户您好！您可以访问联想社区，在最上方的搜索栏中搜索您所遇到的问题，找到解决方案，或者是与他人一起交流讨论。联想社区地址：期待您满意的评价，感谢您对联想的支持，祝您生活愉快！
为您推荐：
其他类似问题
联想电脑的相关知识
换一换
回答问题，赢新手礼包
个人、企业类
违法有害信息,请在下方选择后提交
色情、暴力
我们会通过消息、邮箱等方式尽快将举报结果通知您。User Tools
Site Tools
ToolsShow pagesourceOld revisionsBacklinksRecent ChangesMedia ManagerSitemapLog In&
usersguide:runningonvirtualbox
Table of Contents
Running on VirtualBox
This page describes the process of installing MINIX 3 on VirtualBox.
Confirmed to work with
VirtualBox
3.3.0-3234ff
Debian 3.16.36
3.4.0rc2-373b793
Debian 3.16.36
Debian 10 (buster)
Preliminaries
First of all you'll need to install . VirtualBox binaries can be downloaded from their webpage. If you're running a Linux distribution, you can probably install VirtualBox via the package manager (e.g. with apt-get install virtualbox on Debian-like systems).
Virtual Machine Setup
Before you install MINIX 3, you will need to create a new virtual machine configuration. The VM configuration specifies the parameters of your Virtual machine, e.g., how much memory you want the VM to use, how big you want the virtual hard disk to be, etc. Please see
for guidelines.
In the main screen of VirtualBox, click the big New button.
At the Name and operating system screen, for Name write MINIX3 (anything will work).
For Type select Other.
For Version select Other/unknown.
At the Memory size screen, select the amount of memory for this Virtual Machine (e.g. 1024MB).
At the Hard Drive screen set the size and properties of the Virtual Hard Disk. It is okay to either leave those options at their defaults or change them.
Pressing Create will create the Disk Image and the Virtual Machine that we
Now select MINIX3 in the list on the left.
Click OK, and you are now ready to install MINIX 3!
Troubleshooting:
If the installer fails to detect the virtual hard disk attached to a SATA controller, reconfigure the machine and attach the disk to the IDE controller. Also, make sure that the CDROM is attached to the IDE controller as well. (VirtualBox 5.1.22)
Installation
Assuming you have downloaded and decompressed a MINIX 3 ISO image from the , you can mount the ISO file:
Select MINIX3 in the list on the left.
Click Start.
You will be asked to select a start-up disk. Browse to and select the .iso MINIX 3 image you downloaded earlier and press Open.
Then you can follow the .
When the installation is over, type
to exit Minix. The virtual machine will automatically close.
Booting MINIX 3
Now you have installed MINIX 3 on the virtual machine. The first thing that needs to be sorted out, is that next time you boot, you want to boot from the operating system, and not from the CD image.
Make sure your VM is selected, then click the Settings button on the main screen.
In the menu on the right, click on Storage.
In the storage tree, select the installation .iso file and click the small remove button below.
Great, now you can boot into the newly installed operating system.
Press the big Start button on the main screen.
Post-install Configuration
You should read
for some configuration tips.
: This chapter needs to be re-written, as MINIX 3.3.0 does not install Xorg by default, where as MINIX 3.4.0 Beta can start X with no additional fiddling.
VirtualBox's guest additions are not available for MINIX3. Therefore, MINIX cannot correctly guess the screen resolution. The desired screen resolution has to be set manually in the xorg.conf file.
Changing screen resolution
Make sure you are not running X!
Login as root, and run the following command:
# Xorg -configure
This command should create a xorg.conf.new file in /root.
In Section “Screen” from xorg.conf.new file, make sure to remove all SubSection “Display”, except the one containing: Depth: 16.
Add the desired screen resolution. Possible screen resolutions can be found in /var/log/Xorg.0.log. Search for Modes: containing BitsPerPixel: 16, this is important!.
*Mode: 117 ()
XResolution: 1024
YResolution: 768
BitsPerPixel: 16
These resolutions can be added to the newly generated xorg.conf.new (in the example above: ). I was able to use the following resolutions: 320&200, 640&480, 800&600, , , .
Add the desired resolution to the Modes: key in SubSection “Display”.
Section &Screen&
SubSection &Display&
EndSubSection
EndSection
The xorg.conf.new file can now be moved to /usr/pkg/X11R6/lib/X11/xorg.conf:
# mv xorg.conf.new /usr/pkg/X11R6/lib/X11/xorg.conf
Test the new configuration file with by starting X.org:
Sample xorg.conf
Sample xorg.conf, location: /usr/pkg/X11R6/lib/X11/xorg.conf
Section &ServerLayout&
Identifier
&X.org Configured&
&Screen0& 0 0
InputDevice
&Mouse0& &CorePointer&
InputDevice
&Keyboard0& &CoreKeyboard&
EndSection
Section &Files&
&/usr/pkg/X11R6/lib/X11/rgb&
&/usr/pkg/X11R6/lib/X11/fonts/misc/&
&/usr/pkg/X11R6/lib/X11/fonts/TTF/&
&/usr/pkg/X11R6/lib/X11/fonts/Type1/&
&/usr/pkg/X11R6/lib/X11/fonts/CID/&
&/usr/pkg/X11R6/lib/X11/fonts/75dpi/&
&/usr/pkg/X11R6/lib/X11/fonts/100dpi/&
EndSection
Section &Module&
EndSection
Section &InputDevice&
Identifier
&Keyboard0&
EndSection
Section &InputDevice&
Identifier
&Protocol& &auto&
&Device& &/dev/mouse&
EndSection
Section &Monitor&
Identifier
&Monitor0&
VendorName
&Monitor Vendor&
&Monitor Model&
EndSection
Section &Device&
Identifier
VendorName
&Unknown Vendor&
&Unknown Board&
&PCI:0:2:0&
EndSection
Section &Screen&
Identifier &Screen0&
&Monitor0&
SubSection &Display&
EndSubSection
EndSection
Port Forwarding
VirtualBox has eight networking adapters which can be separately configured to operate in one of the following six modes:
Not attached.
Network Address Translation (NAT).
Bridged networking.
Internal networking.
Host-only networking.
Virtual Distributed Ethernet networking.
It is possible to browse the Web, download files and view e-mail inside the guest (MINIX 3) with the
mode. In this default mode (NAT) the guest operating system can not access the host machine or other computers on the same network and vise versa. However, like a physical router, !VirtualBox can make selected services available through . This means that VirtualBox listens to certain ports on the host and resends all packets which arrive there to the guest, on the same or a different port.
For example, to forward SSH traffic from host machine to guest machine on port 2222:
VBoxManage modifyvm &VM name& --natpf1 &guestssh,tcp,,2222,,22&
The “VM name” is the name of VM on the VirtualBox management screen, and “guestssh” is purely descriptive name and will be auto-generated if omitted.
Connecting to guest machine with following command on host machine
ssh -p 2222 localhost
The guest operating system is available for host machine and other machines on the network as well though the same port 2222 at the host's IP address (if host machine firewall allows it). This is useful for remote development and navigation with .
Workarounds
VirtualBox 3.1
VirtualBox 3.1 is not able to boot MINIX 3. Please use the latest version of VirtualBox.
Install issue (no hardware acceleration)
Symptom: kernel panic right after boot menu (CD loads and displays boot menu but panics right after)
Workaround:
If you can enable hardware acceleration:
Verify that your processor has the virtualization extensions (VT-x, AMD-V)
Enable hardware acceleration in your BIOS.
Go to the Settings dialog for your VM image by selecting it and clicking the Settings button on the main screen.
Click on System
Click on the Acceleration tab.
Check Enable VT-x/AMD-V.
If you aren't able to use hardware acceleration (e.g. VirtualBox 3.1.2 + Core 2 Duo + Minix 3.2.0):
Follow all the installation steps as above.
Uncheck Enable VT-x/AMD-V.
Start your VM with this command: VBoxSDL --startvm minix --norawr0 --norawr3.
Replace your VM image's name for minix in the preceding command.
VirtualBox 4.0 has no Enable VT-x/AMD-V button, but you can issue this command to avoid kernel panics during installation: VBoxSDL --startvm minix --norawr0 --norawr3
DNS resolution not working
When the MINIX3 virtual machine is using (at least) NAT networking configuration, it will obtain the DNS server address from the host system through DHCP. The VirtualBox-provided DNS server address is the exact same address as used on the host system. On some systems, this can lead to nonworking DNS resolution. For example, the host system uses a local resolver (on 127.0.1.1), which leads to the MINIX3 guest fruitlessly sending DNS requests to itself rather than the host's resolver. The result is that for example pkgin up gives “Host name lookup failure” errors.
On MINIX3, the current DHCP-obtained DNS server settings can be checked with the command dhcpd -q - the DNS server address is listed as DNSserver. If this address is indeed not a routable IP address, one may have to enable VirtualBox's DNS proxy, using . This should resolve the issue.
If you have configured a time zone in MINIX3 (by for example putting the line “export TZ=CET” in /etc/rc.timezone), and you find that your clock (printed by for example the “date” command) ends up being ahead of real time by one or more hours, then take the following steps (tested on VirtualBox 4.1.6):
Shut down and power off the virtual machine (at the moment this requires a hard power-off through the VirtualBox GUI);
Go to the Settings of
Go to the System
Under Extended features, check the “Hardware clock in UTC time”
Click on OK
Restart the virtual machine, and the problem should now be fixed, even though the “wrong” (GMT) date will be printed at bootup.
Note that if your clock is behind for any reason, the MINIX3 vbox VirtualBox time sync driver will automatically correct the time for you.
Shared Folders
To use the shared folders feature please do the following:
Ensure the virtual mach
Go to the Settings of
Go to the Shared Folders
Click the add button and select the folder to share from the host
Click on OK
Start the VM
To mount your shared folder do the following:
mount -t vbfs -o share=NAME none /mnt
Be sure to replace NAME here with the name you assigned the share in step 4. Please also note that this cannot be entered into fstab for automatic mounting due to the fact that mounting takes place earlier in the boot process than the loading of the appropriate virtualbox driver for shared folders.
Page ToolsIQflexUsersGuide用户指南_图文_百度文库
赠送免券下载特权
10W篇文档免费专享
部分付费文档8折起
每天抽奖多种福利
两大类热门资源免费畅读
续费一年阅读会员，立省24元！
IQflexUsersGuide用户指南
阅读已结束，下载本文需要
想免费下载本文？
定制HR最喜欢的简历
下载文档到电脑，同时保存到云知识，更方便管理
加入VIP
还剩28页未读，
定制HR最喜欢的简历
你可能喜欢ARWUsersGuideV3
说明：&&是wrf安装运行必学的文本的，虽然是英文版的，但是只要一边学习一边操作还是很容易理解的(Is installed to run wrf will learn the text, although the English version, but as long as the learning side of the operation while it is easy to understand)
文件列表：
ARWUsersGuideV3.pdf
近期下载者：
相关文件：下载费用：18 文库币 &
proSLRcUsersGuide EASTMAN KODAK COMPANYRochester, New York 14650www.kodak.com/go/dcs(C) Eastman Kodak Company, 2003.TM: Kodak, Kodak ProfessionalP/N 6B8773Indexresettingdefaults, 5-13resolutionJPEG, 6-12raw, 4-6, 6-12setting in basic mode, 4-6reviewing images, 11-1browsing, 11-7histogram mode, 11-3multiple image mode, 11-5on external video, 12-1selectinIndeximager, 2-19cleaning, 14-3imagesdeleting, 11-11reviewing. see reviewing imagestagging, 11-12inserting batteries, 3-4intervalometer, 5-20changing settings, 5-21ISO, 5-22setting in basic mode, 4-4sIndexDDCS Pro SLR/cback, 2-2bottom, 2-3front, 2-1media door, 2-4side,2-3,2-4top, 2-2turning on and off, 2-6defaults, resetting, 5-13delete button, 2-9deleting images, 11-11depth of field preview buttoIndexAaperture-priority auto exposure mode, 7-11auto exposure bracketing, 7-18auto exposure lock, 7-16autofocus, 8-1situations where autofocus may not work as expected, 8-2Bbasic camera operations, 4-LCD Liquid Crystal Display. Your camera has four: the Top Status LCD panel, Back Status LCD panel, Image LCD panel, and the LCD inside the viewfinder.Microdrive Developed by IBM, Microdrives are smallDepth of field The zone of sharpest focus in front of, behind, and around the subject.EV (Exposure value) A numeric value that expresses the amount of light for a given exposure. It depends on the briGlossaryAE (Automatic Exposure) By using a built-in exposure meter, the camera determines the correct exposure value, which is combinations of shutter speed and/or aperture value.AE (Automatic ExposurWarranty5. Out-of-Warranty Support Options:There will be a charge for out-of-warranty call incidents if you wish to speak to a Kodak support representative. A call incident is defined to include only WarrantyProduct Support OptionsDuring the warranty period for the KODAK PROFESSIONAL DCS Pro SLR/c Digital Camera, you are entitled to product support for both hardware and software, provided your camWarrantyKODAK MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.KODAK WILL NOT BE RESPONSIBLE FORWarrantyLimitationsREPAIR OR REPLACEMENT WITHOUT CHARGE IS KODAK’S ONLY OBLIGATION UNDER THIS WARRANTY.Warranty service will not be provided without dated proof of purchase. Please return the WarrantyAppendix D: WarrantyCAREFULLY READ THE FOLLOWING WARRANTY TERMS AND CONDITIONS BEFORE USING YOUR CAMERA. USE OF YOUR CAMERA INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREETroubleshootingImage contrast is wrong in the Image LCD.Adjust using the Display Contrast feature (see page 11-8).Exposure is off. Capture a test image, use the histogram (see page 11-3) and zoom to 1TroubleshootingCard Busy LED and Card icon on the Digital Status LCD are blinking.Data is being written to the memory card.Do not remove the card until the blinking stops.Accidentally deleted an imageTroubleshootingShutter does not release. Battery is exhausted. Replace the battery (see page 3-4).D-Dial is set outside of the Drive area.Set the D-Dial to one of the settings in the Drive area (see pAppendix C: TroubleshootingProblems, Causes, and RemediesProblem Cause RemedyCamera does not power on Use a fully charged battery or the power module.Remove the memory card from the camera and try to Lens CompatibilityEF 300mm F4L IS USM TS-E 45mm F2.8EF 400mm F2.8L IS USM TS-E 90mm F2.8EF 400mm F4 DO IS USMCANON LensesB-4 April 28, 2004Lens CompatibilityCANON LensesFor more information go to http://www.usa.canon.com/eflenses/pdf/spec.pdf.CANON LensesEF 14mm F2.8 EF 600mm F4L IS USMEF 15mm F2.8L USM EF 1200mm F5.6L USMEF 20mm F2.8 USLens Compatibility24-70mm F2.8 EX DG ASPHERICAL DF24-70mm F3.5-5.6 ASPHERICAL HF28-70mm F2.8 EX SPHERICAL DF28-70mm F2.8-4 HIGH SPEED ZOOMMINI ZOOM MACRO 28-80mm F3.5-5.6 ASPHERICAL HFMINI ZOOM MACRO Appendix B: Lens CompatibilityYour camera uses CANON EF-compatible lenses or SIGMA lenses with a CANON EF mount.SIGMA LensesFor more information, go to http://www.sigmaphoto.com/html/lenschart.htm.SIGSpecificationsBurst DepthThe burst depth (maximum number of images in a burst) varies, depending on the image resolution and the file format.The following table shows approximate burst depth.Power souSpecificationsAE Bracketing 3EV, 1/3 EV steps, (normal, under, over)Depth-of-Field Preview YesRemote Control 3-channel Infrared (included)Self timer Yes (2 sec. or 10 sec.)Electronic Strobe E-TTL autoSpecificationsMetering sensitivity -1 to 20 EV (ISO 100 with f/1.4)Exposure Compensation ±3EV in 1/3 EV stepsAE Lock YesExposure modes Program AE (shiftable), Aperture Priority AE, Shutter Speed PriorAppendix A: SpecificationsDimensions Height: 136.5 mm (5.375 in.)Width: 149.2 mm (5.875 in.)Depth: 76.2 mm (3.0 in.)Weight 895 g (1.97 lbs) without lens, battery or power module, or storage mediaImageSerial Data Collection and Global Positioning SystemUsing the GPS Feature1. Connect the appropriate end of the GPS serial cable to the Remote Release Accessory port on your camera.2. Connect the otherSerial Data Collection and Global Positioning SystemSetting the Baud Rate Before transmitting data between the camera and a connected device, you must set the baud rate required by the device. NOTE: FSerial Data Collection and Global Positioning SystemSerial In Status When you choose New Images or Previous Image from the Serial In menu, the Serial In Status choice becomes available. When you choosSerial Data Collection and Global Positioning SystemSerial In Mode Using Serial In mode, your camera accepts text strings from a connected external device. The information is then added to specified i15 Serial Data Collection and Global Positioning SystemThe Serial port is used to exchange data with a variety of other digital products.The following Serial Port settings are available:Serial InSeriaCamera CareStoringCarefully check the camera’s operation after lengthy storage, when the camera has not been used for a long time, or before an important trip or shooting assignment.When storing your Camera CareInspecting and Cleaning the ImagerCAUTION:The imager is very delicate. It is important that you follow these instructions when inspecting and cleaning the imager. Failure to do so can damagCamera CareThe ImagerLight from the scene you are photographing strikes the imager when the camera’s shutter is open. The imager converts this light into a digital image. If the imager’s cover glass gCamera CareCleaningCAUTION:Remove the lens from the camera before cleaning.1. Turn off the camera.2. Disconnect the camera from the AC adapter and from the computer. 3. Using a clean, damp cloth, clea14 Camera CareHandlingWith careful handling, your KODAK PROFESSIONAL DCS Pro SLR/c Digital Camera (DCS Pro SLR/c) should produce images of the highest quality for years to come.Be careful not to drop Connecting to Your ComputerYou may connect more than one camera or other IEEE 1394 devices to the card as long as you avoid a closed loop configuration. (The drawing indicates an acceptable configuratConnecting to Your ComputerConnecting Your Camera to the ComputerCAUTION:Do not use IEEE 1394 repeaters when connecting your camera. Doing so can damage the camera.Connect your camera to the computer 13 Connecting to Your ComputerThere are two ways to access KODAK PROFESSIONAL DCS Pro SLR/c Digital Camera (DCS Pro SLR/c) images from your computer:Connect the camera to the computer using an IEEE 13Viewing Image LCD Information on External VideoEnabling External Video1. Choose External Video from the Review menu.2. Choose NTSC or PAL to enable the Video port. Choose Off to disable the port.3. Pr12 Viewing Image LCD Information on External VideoYou can display images and menus on an external video monitor.After you capture an image, it automatically appears on a connected video monitor where Working with Images on the CameraRecording Sound FilesYou can record a sound file to annotate the selected image, either immediately after you capture it or later when you review it. If you delete theWorking with Images on the CameraTagging ImagesYou can tag one or more images for a variety of operations: On the camera, you can specify that the tagged images are not deleted.In the KODAK PROFESSIONWorking with Images on the CameraDeleting ImagesYou can delete a single image, all images in a folder or on a card, or all untagged images in a folder or on a card. Associated sound files are also delWorking with Images on the Camera3. Select the images to appear in the slide show: Choose Slide Show from the Review menu, then highlight All on cards, All in folder, Tagged on cards, or Tagged in folWorking with Images on the CameraAuto ReviewWhen you enable the Auto Review feature, the Image LCD turns on when you capture an image then displays the image for the amount of time you specify. After Working with Images on the CameraOverexposure Indicator You can indicate areas of overexposure in Single or Multiple Image Display modes. 1. Choose Single or Multiple Image mode.2. Choose Overexp. IndWorking with Images on the CameraBrowsing Through Images Press the left or right side of the Five-way control to navigate through images in the selected folder.NOTE: In Zoom mode, with the region of Working with Images on the CameraSelecting a Review Folder The Nav+ button provides a shortcut for quickly navigating among folders and images within a folder.NOTE: If there are two cards in the camerWorking with Images on the CameraLuminometerThe center square, which appear when the region of interest box is enabled in Zoom mode, indicates the level of luminance channel saturation of pixels belowWorking with Images on the CameraZoom ModeThe selected image appears with a region of interest (ROI) box and a highlighted center square. The region of interest box includes the area of the image thatWorking with Images on the CameraHistogram ModeWhen Histogram mode is active, the selected image, its histogram, and the following information appear:Exposure modeApertureShutter speedExposure compensWorking with Images on the CameraChanging the Duration of the Image Mode Menu DisplayThe Image Mode menu appears for one second after you select an Image mode. You can change the duration of its displ11 Working with Images on the CameraReviewing ImagesTo review images on the Image LCD:1. Select an Image mode.2. Select a review folder (see page 11-6). 3. Browse through the images (see page 11-7).SeFlash PhotographyFlash Exposure CompensationYou can use Flash Exposure Compensation to adjust the flash's output. Generally, the compensation setting remains enabled until you set it back to zero. TheFlash PhotographyHigh Speed Sync ModeUse High Speed Sync mode (FP Flash) when you want a shutter speed higher than 1/180 sec. For example, you might use this mode in daylight to blur the background byFlash PhotographyAvailable FeaturesThe following features are available when you use a compatible flash unit with the DCS Pro SLR/c:E-TTL autoflashHigh-Speed sync (see page 10-4)Flash Exposure lock (sFlash PhotographyMounting a Hot Shoe FlashMount an optional CANON EX-series Speedlite or a SIGMA EF-500 DG Super flash to the Hot Shoe. See your strobe’s instruction manual for mounting information.Co10 Flash PhotographyThis section covers general instructions for performing flash photography with the KODAK PROFESSIONAL DCS Pro SLR/c Digital Camera (DCS Pro SLR/c). Your flash's operation may be diCapture WorkflowCapture Workflow when the Camera Is Connected to a ComputerConnecting to a Computer and Power SupplyConnect the DCS Pro SLR/c to your computer and power supply.Use the included AC adapCapture WorkflowKODAK PROFESSIONAL DCS Photo DeskPlatforms: WINDOWS and MACINTOSHWhen you open Raw images in DCS Photo Desk you can do the following:Crop and rotateColor balanceSharpenReduce noiseChecCapture WorkflowOccasional Verification To assure the highest image quality, evaluate test images at each location and at the various illuminance conditions. Also use the Image LCD regularly to verifyCapture WorkflowCapturing and Evaluating Test ImagesBefore your photo session begins, and occasionally during a session, you should capture and evaluate images to be sure that the lighting and camera Capture WorkflowDevice and Media PreparationInstall the included software.Calibrate your monitor and printers regularly, for example, weekly.Charge one or more batteries. Insert a battery.Set the time9 Capture WorkflowThis chapter outlines two general workflows to help you manage images captured on your KODAK PROFESSIONAL DCS Pro SLR/c Digital Camera (DCS Pro SLR/c). The workflows may vary betweenFocusingLocking Focus To capture an image of a subject that is out of the focus detecting area, use Focus Lock. You can use this function only in (Single AF mode)1. Compose the picture with the subjeFocusingCapturing Images in Single AF ModeSingle AF mode is useful when you recompose a picture with the main subject off-center. 1. Lightly press and hold the Shutter button to activate autofocus.2. FocusingSelecting the Autofocus ZoneYou can set the active Autofocus zone.1. Lightly press the Shutter button to wake up the camera.2. Press the Exposure Compensation / AF Zone button twice in quick sFocusingSituations where Autofocus May Not Work as ExpectedAlthough your camera is equipped with highly precise AF system, in some cases autofocus does not work as expected.Low-contrast subjects, such8 FocusingYou can set up your KODAK PROFESSIONAL DCS Pro SLR/c Digital Camera (DCS Pro SLR/c) to focus automatically (described below) or, in situations where autofocus or focus lock are not effectiveControlling ExposureNotes:For the first frame the mark is displayed continuously in the Top Status LCD. For the second frame the mark blinks slowly. For the third frame it blinks quickly.In Self TimControlling ExposureAuto Bracketing Auto Bracketing is useful when you’re having difficulty determining the proper exposure. This function lets you capture a sequence of images of the same subject at Controlling ExposureExposure Compensation Use Exposure Compensation to intentionally overexpose or underexpose an image.Press and hold the Exposure Compensation button and turn the C-Dial to set the dControlling ExposureAuto Exposure Lock Auto Exposure Lock is used to lock the camera’s exposure values on an off-center subject. It is available when the camera is in Manual Focus or Continuous AutofoControlling ExposureBulb Setting Use the Bulb setting when a long exposure time is required for a night scene or a very dark subject. Use a tripod when capturing images with the Bulb setting.NOTE: ChoControlling ExposureTo Determine the Exposure Value Using the Camera’s Exposure MeterRotate the Mode Selector lever to M. When you lightly press the Shutter button, the shutter speed and aperture valuControlling ExposureManual Exposure Mode Use the Viewfinder’s Exposure meter to help you set both the shutter speed and aperture value for the scene’s lighting.1. Rotate the D-Dial to the desired sett
文档加载中……请稍候！
下载文档到电脑，查找使用更方便
18 文库币 &&0人已下载
还剩页未读，继续阅读
&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>一、&/span>&/strong>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>本站提供全自助服务，购买后点击下载按钮可以下载到你电脑或手机（系统不会发送文档到您的邮箱），请注意查看下载存放位置；&/span>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>&strong>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>二、&/span>&/strong>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>本站具有防盗链功能，所以不要使用迅雷、旋风、网际快车等第三方辅助下载工具（不支持QQ浏览器），否则下载下来的文件只是网页或乱码；&/span>&br/>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>&strong>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>三、&/span>&/strong>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>由于网络原因、下载知识欠缺、本地电脑或手机阻止下载等问题无法解决时，需要提供以下&/span>&span style=&font-family: 微软雅黑, &Microsoft YaHei&; color: rgb(255, 0, 0);&>任意一条信息&/span>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>给我们，我们才能更及时地为你服务：&/span>&br/>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>3.1、如果是注册的会员，请告诉我们你的会员账号；&/span>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>3.2、如果是游客下载的，请告诉我们你下载时填写的手机或者邮箱；&/span>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>3.3、如果是微信或QQ快捷登陆的，请告诉我们你的微信或QQ昵称；&/span>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>3.4、如果这些你仍然无法确定，请告诉我们你的付款单号（我们可以通过单号反过来查询你的账号和下载记录）&/span>&a href=&http://www.jswku.com/i-128.html& target=&_blank&>&span style=&color: rgb(247, 150, 70);&>看看什么是单号？&/span>&/a>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>；&/span>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>&strong>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>四、&/span>&/strong>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>需要下载哪份文档，请发送文档网址，而不是截图，更不要直接把标题给我们；&/span>&br/>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>&strong>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>五、&/span>&/strong>&span style=&font-family: 微软雅黑, &Microsoft YaHei&;&>其它下载常见问题详见：&a href=&http://www.jswku.com/i-128.html& target=&_blank& style=&color: rgb(247, 150, 70); text-decoration:&>&span style=&font-family: 微软雅黑, &Microsoft YaHei&; color: rgb(247, 150, 70);&>http://www.jswku.com/i-128.html&/span>&/a>&/span>&/p>&p>&br/>&/p>" /> & & 鉴于本网发布稿件来源广泛、数量较多, 系统审核过程只针对存在明显违法有害内容（如色情、暴力、反动、危害社会治安及公共安全等公安部门明文规定的违法内容）进行处理，难以逐一核准作者身份及核验所发布的内容是否存在侵权事宜, 如果著作权人发现本网已转载或摘编了其拥有著作权的作品或对稿酬有疑议, 请及时与本网联系删除。&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>&strong>& & 侵权处理办法参考版权提示一文：&/strong>&&a href=&http://www.jswku.com/h-35.html& target=&_blank& style=&color: rgb(247, 150, 70); text-decoration:&>&span style=&color: rgb(247, 150, 70);&>http://www.jswku.com/h-35.html&/span>&/a>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>1、如涉及内容过多，需要发送邮箱，请电子邮箱到，我们会及时处理；&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>2、系统一旦删除后，文档肯定是不能下载了的，但展示页面缓存需要一段时间才能清空，请耐心等待2-6小时；&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>3、请版权所有人（单位）提供最起码的证明（证明版权所有人），以便我们尽快查处上传人；&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>4、请文明对话，友好处理；&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>5、为了杜绝以前再有类似的侵权事情，可以为我们提供相应的关键字，便于管理人员添加到系统后能有效排除和抵制与您（贵单位）相关版权作品上传；&/p>&p>&br/>&/p>" /> &span style=&color: rgb(85, 85, 85); font-family: 微软雅黑;&>& & 为了维护合法，安定的网络环境，本着开放包容的心态共建共享技术文库平台，请各位上传人本着自律和责任心共享发布有价值的文档；本站客服对于上传人服务前，有以下几点可提前参阅：&/span>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>&span style=&color: rgb(85, 85, 85); font-family: 微软雅黑;&>1、本站上传会员收益见：&a href=&http://www.jswku.com/h-36.html& target=&_blank& style=&color: rgb(247, 150, 70); text-decoration:&>&span style=&font-family: 微软雅黑; color: rgb(247, 150, 70);&>http://www.jswku.com/h-36.html&/span>&/a>&/span>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>2、本站不会为任何刚注册的上传会员特批解除上传限制，普通会员每天可以上传100份，值班经值会审核其上传内容，请自行观察自己上传的文档哪些在“临时转换中”（审核通过），哪些在审核拒绝中，连续坚持几天都没有任何文档被拒的情况下，根据文档质量和发布分类是否正常等考量合格后值班经理会特批升级会员等级，相应的权益也同时上升。&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>3、上传人本着友好、合作、共建、共享的原则，请耐心仔细的查看&a href=&http://www.jswku.com/i-113.html& target=&_blank&>&span style=&color: rgb(247, 150, 70);&>《违禁作品内容处理规则》&/span>；&/a>&&&a href=&http://www.jswku.com/i-113.html& target=&_blank&>http://www.jswku.com/i-113.html&/a>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>4、上传人可以观注本站公告，查看其它被公示永久封禁的原因 &&a href=&http://www.jswku.com/news-1.html& target=&_blank&>http://www.jswku.com/news-1.html&/a>&/p>&p style=&margin-top: 0 margin-bottom: 0 padding: 0 color: rgb(102, 102, 102); font-family: 微软雅黑, Arial, &Times New Roman&; font-size: 14 white-space: background-color: rgb(255, 255, 255);&>5、其它问题可以参阅上传常见问题指引：&a href=&http://www.jswku.com/i-89.html& target=&_blank&>http://www.jswku.com/i-89.html&/a>&/p>&p>&br/>&/p>" />