中兴w615v2的板子ar7161，刷ubnt求助 - UBNT专版 -
恩山无线论坛 -
Powered by Discuz!
后使用快捷导航没有帐号？
只需一步，快速开始
请完成以下验证码
请完成以下验证码
查看: 8208|回复: 8
中兴w615v2的板子ar7161，刷ubnt求助
移动CMCC工程用换下来的，还很新
arM 2.4G的无线是ar9227 后面还有块5G的。
自带的web管理只能用作AP/路由，木有中继、客户端 想刷UBNT
查了下和UBNT RouterStation 这个配置挺像，不知能不能刷这个固件。。
菜鸟一个，特来求助 望知道的能给指点下。。谢谢大家
0.jpg (91.65 KB, 下载次数: 0)
17:51 上传
我的恩山、我的无线
The best wifi forum is right here.
问问大家要怎么刷~给指条路啊~谢谢{:soso_e183:}
COM口连接 显示下面的信息 ：
U-Boot 1.1.4 (Apr 19 2011 - 15:15:24)
AP96 (ar7100) U-boot 0.0.1
DRAM:&&bxc0140180
Top of RAM usable for U-Boot at:
Reserving 221k for U-Boot at: 83fc4000
Reserving 384k for malloc() at: 83f64000
Reserving 44 Bytes for Board Info at: 83f63fd4
Reserving 36 Bytes for Global Data at: 83f63fb0
Reserving 128k for boot params() at: 83f43fb0
Stack Pointer at: 83f43f98
Now running in RAM - U-Boot at: 83fc4000
id read 0x100000ff
flash size 8MB, sector count = 64
Flash: 16 MB
*** using default environment ***
BOARD IS NOT CALIBRATED!!!
In:& & serial
Out:& &serial
Err:& &serial
Net:& &ag7100_enet_initialize...
No valid address in Flash. Using fixed address
Setup M88E1116 Phy for 0
M88E1116: Port 0, Phy Found, Reset completed
M88E1116: unit 0 phy addr 14 eth0: 00:03:7f:09:0b:ad
*** Press 1 means entering boot mode***
Press 2 means entering testing mode***
Press 3 means entering norm mode***
Hit key to stop autoboot:&&0
Entering norm mode ...
Found image at 0xbf740000
Found image at 0xbf840000
foundVer = 2
****Try the first image...
imgPtr[image_num-1] = bf740000
## Booting image at bf740100 ...
& &Image Name:& &Linux Kernel Image
& &Created:& && &&&11:53:40 UTC
& &Image Type:& &MIPS Linux Kernel Image (lzma compressed)
& &Data Size:& & 987100 Bytes = 964 kB
& &Load Address:
& &Entry Point:&&802c7000
& &Verifying Checksum ... OK
& &Uncompressing Kernel Image ... OK
## Transferring control to Linux (at address 802c7000) ...
## Giving linux memsize in bytes,
Starting kernel ...
Linux version 2.6.15--LSDK-7.3.0.387 () (gcc version 3.4.4) #1 Sun Sep 11 19:53:34 CST 2011
flash_size passed from bootloader = 16
arcs_cmdline = console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/sbin/init mem=64M
Check boot para cksum...
boot para cksum OK!
bootPara.runmode=3
CPU revision is:
setup_arch arcs_cmdline = console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/sbin/init mem=64M
setup_arch saved_command_line = console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/sbin/init mem=64M
Determined physical RAM map:
mem_size = 3fff000
User-defined physical RAM map:
memory: 03fff000 @
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/sbin/init mem=64M
line = 31:04
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Using 340.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 6k available (2277k kernel code, 3820k reserved, 554k data, 168k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...&&available.
pdt_cspkernel_init
NET: Registered protocol family 16
[KLog][Info] [oss_klog.c(694)ProcLog] System start!
[KMONITOR][Notice] [monitor.c(199)MonitorInit]&&cspmonitor init... !&&
SCSI subsystem initialized
[KQOS][Info] [qos.c(167)CSPKernel_QC_In] Qos module init
NET: Registered protocol family 2
ip_rt_init() start call CSP_alloc_large_system_hash
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
ip_rt_init() call CSP_alloc_large_system_hash end
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
AR7100 GPIOC major 0
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
system monitor is begining!!!!!
driver $Revision: #1 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
RAMDISK driver initialized: 1 RAM disks of 1024K size 1024 blocksize
=======================& Core dev alloc name ifb0
=======================& Core dev alloc name ifb1
RedBoot partition parsing not available
PartitionNum = 9
Creating 9 MTD partitions on &ar7100-nor0&:
0xx : &whole_flash&
0xx : &Bootloader&
0xx : &BootEnv&
0xx : &userconfig&
0xx : &filesystem&
0xx : &kernel&
0xx : &kernel2&
0xx00f80000 : &filesystem2&
0x00fc00000 : &parameters&
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
u32 classifier
& & Actions configured
nf_conntrack version 0.5.0 (511 buckets, 4088 max)
ip_tables: (C)
Netfilter Core Team
netfilter PSD loaded - (c) astaro AG
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C)
Netfilter Core Team
IPv6 over IPv4 tunneling driver
=======================& Core dev alloc name sit0
=======================& Core dev alloc name ip6tnl0
NET: Registered protocol family 17
af_packet.c packet_init call register_netdevice_notifier
Bridge firewalling registered
br_init call register_netdevice_notifier
Ebtables v2.0 registered
NET: Registered protocol family 24
PPP Deflate Compression module registered
=======================& Core dev alloc name lo
[LEDKEYDRV][Info] [ledkey_mod.c(1643)LedkeymodInit] Ledkey_mod Driver Version 0.0.1.
LedGpioInit gpio = 2
[TAGPARAM][Info] [tagparam_mod.c(1383)TagaramodInit] Tagaram module Driver Version 0.0.1.
[TAGPARAM][Info] [tagparam_mod.c(1423)TagaramodInit] parse tag param success
[km255][Info] [ver_info.c(349)ver_info_init] ver_info_init
bootPara.bootWhichImg=1
bootPara.img_info_tbl[0].flashOffset=0x&&740000
sHardVersion=V2.0
CspGetVerInfo exit
[km255][Info] [ver_info.c(138)ReadInfoFromVer] ver_info_init
[km255][Info] [ver_info.c(145)ReadInfoFromVer] ver_info_init
[km255][Info] [ver_info.c(161)ReadInfoFromVer] wFirmwareForm is:0x1
[KSWETH][Notice] [csp_ifinfo.c(191)csp_ifinfo_init] Initializing CSP IFinfo...
[KSWETH][Warn] [csp_ifinfo.c(213)csp_ifinfo_init] No IFinfo in flash!
[KSWETH][Notice] [sweth_core.c(2673)sweth_init] SWÐ HAL driver initing!
[KSWETH][Notice] [sweth_core.c(129)CreateSwEthObjs] Create SW & ETH objects
[KSWETH][Notice] [sweth_core.c(145)CreateSwEthObjs] Failed to get SWITCH attr, iRet=-2
[KSWETH][Info] [sweth_core.c(152)CreateSwEthObjs] nEmac = 1, nSw = 0, nEth=1.
[KSWETH][Info] [sweth_core.c(311)CreateSwEthObjs] ETH obj0: PhyType = 0, Is_assoc_sw = 0, Emac = 0, Phy = 20
ar7100wdt_init: Registering WDT wdt init success
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 168k freed
init started:&&BusyBox v1.01 (-11:47+0000) multi-call binary
Bad inittab entry: ttyS0:-/bin/sh
Bad inittab entry: ttyS0:-/bin/sh
Starting pid 15, console /dev/ttyS0: '/etc/rc'
Algorithmics/MIPS FPU Emulator v1.5
init normal mode!!!
Loading drivers and kernel modules...
我的恩山、我的无线
The best wifi forum is right here.
Using /lib/modules/2.6.15/net/ag7100_mod.ko
ag7100_mod: module license 'unspecified' taints kernel.
AG7100: Length per segment 256
AG7100: Max segments per packet 8
AG7100: Max tx descriptor count& & 1600
AG7100: Max rx descriptor count& & 252
AG7100: fifo cfg 3 01c001ff
dev-&watchdog_timeo = 0
AG7100CHH: Mac address for unit 0 base=
AG7100CHH: ff:ff:ff:ff:ff:ff
=======================& Core dev alloc name eth0
pEmacInfo-&Eth_list[0] = 0
[KSWETH][Notice] [ar7100_emac_ada(670)Register_ar7100] Register ar7100 EMAC driver
[KSWETH][Notice] [sweth_core.c(577)RegisterEmacDrv] Register EMAC driver
[KSWETH][Notice] [sweth_core.c(418)InitSwEthObjs] Initialise SW & ETH objects
[KSWETH][Warn] [sweth_core.c(1700)hal_set_port_ma] Driver do not support set MAC address!
Using /lib/modules/2.6.15/net/timereboot.ko
device eth0 entered promiscuous mode
countFlag = 0
Starting pid 38, console /dev/ttyS0: '/sbin/getty'
Login: Using /lib/modules/2.6.15/net/pdt_tunnel.ko
& && && && && && && && && && && && && && && && &&&=========duoduo:0
& && && && && && && && && && && && && && && && && && && && && && & =========duoduo11:0
& && && && && && && && && && && && && && && && && && && && && && && && && && && && &&&=========duoduo222:0
& && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && & the func is disabled....
& && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && & Using /lib/modules/2.6.15/net/adf.ko
& && && &Using /lib/modules/2.6.15/net/asf.ko
& && && && && && && && && && && && && && && &Using /lib/modules/2.6.15/net/ath_hal.ko
& && && && && && && && && && && && && && && && && && && && && && && && && && && && & Using /lib/modules/2.6.15/net/ath_rate_atheros.ko
& && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && &&&Using /lib/modules/2.6.15/net/ath_dev.ko
& && && && && &&&Using /lib/modules/2.6.15/net/umac.ko
& && && && && && && && && && && && && && && && && && &wlan0
& && && && && && && && && && && && && && && && && && && &&&set port wlan0: enable=1 mac: 01:80:c2:00:00:03
& && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && & wlan15
& && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && & set port wlan15: enable=0 mac: 00:00:00:00:00:00
& && && &set port wlan16: enable=1 mac: 01:80:c2:00:00:03
我的恩山、我的无线
The best wifi forum is right here.
把你的2.4G的卡卖我把。。。
我的恩山、我的无线
The best wifi forum is right here.
我的恩山、我的无线
The best wifi forum is right here.
请问你的这个W615V2搞定刷机没有？也想弄一下
我的恩山、我的无线
The best wifi forum is right here.
楼主搞定了没？这个AP不可能没有中继功能吧。
我的恩山、我的无线
The best wifi forum is right here.
楼主搞定了没？这个AP不可能没有中继功能吧。
楼主的早就卖掉了
我的恩山、我的无线
The best wifi forum is right here.
刚弄到几个， 这个得先找编译合适的uboot, 然后再编译openwrt
我的恩山、我的无线
The best wifi forum is right here.
Powered by中兴w615v2的板子ar7161，刷ubnt求助_百度知道
中兴w615v2的板子ar7161，刷ubnt求助
我有更好的答案
答题不易，互相帮助，请及时点击（采纳为满意回答）按钮！， 手机提问的朋友在客户端右上角评价点（满意）即可. 如果你认可我的回答应该可以吧！建议楼主找版主问下！看清楚主板CPU型号 记得好评和采纳
采纳率：97%
来自团队：
为您推荐：
其他类似问题
ubnt的相关知识
换一换
回答问题，赢新手礼包
个人、企业类
违法有害信息,请在下方选择后提交
色情、暴力
我们会通过消息、邮箱等方式尽快将举报结果通知您。后使用快捷导航没有帐号？
后使用快捷导航没有帐号？
查看: 14640|回复: 14
中尉, 积分 597, 距离下一级还需 404 积分
该用户从未签到
移动CMCC工程用换下来的，还很新
arM 2.4G的无线是ar9227 后面还有块5G的。
自带的web管理只能用作AP/路由，木有中继、客户端 想刷UBNT 或者DD op 都行
查了下和UBNT RouterStation 这个配置挺像（已找到了这个的原厂固件和DD），不知能不能刷这个。。
菜鸟一个，特来求助 望知道的能给指点下。。谢谢大家
本帖子中包含更多资源
才可以下载或查看，没有帐号？
中尉, 积分 597, 距离下一级还需 404 积分
该用户从未签到
问问大家要怎么刷~给指条路啊~谢谢
COM口连接 显示下面的信息 ：
U-Boot 1.1.4 (Apr 19 2011 - 15:15:24)
AP96 (ar7100) U-boot 0.0.1
DRAM:&&bxc0140180
Top of RAM usable for U-Boot at:
Reserving 221k for U-Boot at: 83fc4000
Reserving 384k for malloc() at: 83f64000
Reserving 44 Bytes for Board Info at: 83f63fd4
Reserving 36 Bytes for Global Data at: 83f63fb0
Reserving 128k for boot params() at: 83f43fb0
Stack Pointer at: 83f43f98
Now running in RAM - U-Boot at: 83fc4000
id read 0x100000ff
flash size 8MB, sector count = 64
Flash: 16 MB
*** using default environment ***
BOARD IS NOT CALIBRATED!!!
In:& & serial
Out:& &serial
Err:& &serial
Net:& &ag7100_enet_initialize...
No valid address in Flash. Using fixed address
Setup M88E1116 Phy for 0
M88E1116: Port 0, Phy Found, Reset completed
M88E1116: unit 0 phy addr 14 eth0: 00:03:7f:09:0b:ad
*** Press 1 means entering boot mode***
Press 2 means entering testing mode***
Press 3 means entering norm mode***
Hit key to stop autoboot:&&0
Entering norm mode ...
Found image at 0xbf740000
Found image at 0xbf840000
foundVer = 2
****Try the first image...
imgPtr[image_num-1] = bf740000
## Booting image at bf740100 ...
& &Image Name:& &Linux Kernel Image
& &Created:& && &&&11:53:40 UTC
& &Image Type:& &MIPS Linux Kernel Image (lzma compressed)
& &Data Size:& & 987100 Bytes = 964 kB
& &Load Address:
& &Entry Point:&&802c7000
& &Verifying Checksum ... OK
& &Uncompressing Kernel Image ... OK
## Transferring control to Linux (at address 802c7000) ...
## Giving linux memsize in bytes,
Starting kernel ...
Linux version 2.6.15--LSDK-7.3.0.387 () (gcc version 3.4.4) #1 Sun Sep 11 19:53:34 CST 2011
flash_size passed from bootloader = 16
arcs_cmdline = console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/sbin/init mem=64M
Check boot para cksum...
boot para cksum OK!
bootPara.runmode=3
CPU revision is:
setup_arch arcs_cmdline = console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/sbin/init mem=64M
setup_arch saved_command_line = console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/sbin/init mem=64M
Determined physical RAM map:
mem_size = 3fff000
User-defined physical RAM map:
memory: 03fff000 @
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/sbin/init mem=64M
line = 31:04
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Using 340.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 6k available (2277k kernel code, 3820k reserved, 554k data, 168k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...&&available.
pdt_cspkernel_init
NET: Registered protocol family 16
[KLog][Info] [oss_klog.c(694)ProcLog] System start!
[KMONITOR][Notice] [monitor.c(199)MonitorInit]&&cspmonitor init... !&&
SCSI subsystem initialized
[KQOS][Info] [qos.c(167)CSPKernel_QC_In] Qos module init
NET: Registered protocol family 2
ip_rt_init() start call CSP_alloc_large_system_hash
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
ip_rt_init() call CSP_alloc_large_system_hash end
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
AR7100 GPIOC major 0
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
system monitor is begining!!!!!
driver $Revision: #1 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
RAMDISK driver initialized: 1 RAM disks of 1024K size 1024 blocksize
=======================& Core dev alloc name ifb0
=======================& Core dev alloc name ifb1
RedBoot partition parsing not available
PartitionNum = 9
Creating 9 MTD partitions on &ar7100-nor0&:
0xx : &whole_flash&
0xx : &Bootloader&
0xx : &BootEnv&
0xx : &userconfig&
0xx : &filesystem&
0xx : &kernel&
0xx : &kernel2&
0xx00f80000 : &filesystem2&
0x00fc00000 : &parameters&
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
u32 classifier
& & Actions configured
nf_conntrack version 0.5.0 (511 buckets, 4088 max)
ip_tables: (C)
Netfilter Core Team
netfilter PSD loaded - (c) astaro AG
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C)
Netfilter Core Team
IPv6 over IPv4 tunneling driver
=======================& Core dev alloc name sit0
=======================& Core dev alloc name ip6tnl0
NET: Registered protocol family 17
af_packet.c packet_init call register_netdevice_notifier
Bridge firewalling registered
br_init call register_netdevice_notifier
Ebtables v2.0 registered
NET: Registered protocol family 24
PPP Deflate Compression module registered
=======================& Core dev alloc name lo
[LEDKEYDRV][Info] [ledkey_mod.c(1643)LedkeymodInit] Ledkey_mod Driver Version 0.0.1.
LedGpioInit gpio = 2
[TAGPARAM][Info] [tagparam_mod.c(1383)TagaramodInit] Tagaram module Driver Version 0.0.1.
[TAGPARAM][Info] [tagparam_mod.c(1423)TagaramodInit] parse tag param success
[km255][Info] [ver_info.c(349)ver_info_init] ver_info_init
bootPara.bootWhichImg=1
bootPara.img_info_tbl[0].flashOffset=0x&&740000
sHardVersion=V2.0
CspGetVerInfo exit
[km255][Info] [ver_info.c(138)ReadInfoFromVer] ver_info_init
[km255][Info] [ver_info.c(145)ReadInfoFromVer] ver_info_init
[km255][Info] [ver_info.c(161)ReadInfoFromVer] wFirmwareForm is:0x1
[KSWETH][Notice] [csp_ifinfo.c(191)csp_ifinfo_init] Initializing CSP IFinfo...
[KSWETH][Warn] [csp_ifinfo.c(213)csp_ifinfo_init] No IFinfo in flash!
[KSWETH][Notice] [sweth_core.c(2673)sweth_init] SWÐ HAL driver initing!
[KSWETH][Notice] [sweth_core.c(129)CreateSwEthObjs] Create SW & ETH objects
[KSWETH][Notice] [sweth_core.c(145)CreateSwEthObjs] Failed to get SWITCH attr, iRet=-2
[KSWETH][Info] [sweth_core.c(152)CreateSwEthObjs] nEmac = 1, nSw = 0, nEth=1.
[KSWETH][Info] [sweth_core.c(311)CreateSwEthObjs] ETH obj0: PhyType = 0, Is_assoc_sw = 0, Emac = 0, Phy = 20
ar7100wdt_init: Registering WDT wdt init success
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 168k freed
init started:&&BusyBox v1.01 (-11:47+0000) multi-call binary
Bad inittab entry: ttyS0:-/bin/sh
Bad inittab entry: ttyS0:-/bin/sh
Starting pid 15, console /dev/ttyS0: '/etc/rc'
Algorithmics/MIPS FPU Emulator v1.5
init normal mode!!!
Loading drivers and kernel modules...
Using /lib/modules/2.6.15/net/ag7100_mod.ko
ag7100_mod: module license 'unspecified' taints kernel.
AG7100: Length per segment 256
AG7100: Max segments per packet 8
AG7100: Max tx descriptor count& & 1600
AG7100: Max rx descriptor count& & 252
AG7100: fifo cfg 3 01c001ff
dev-&watchdog_timeo = 0
AG7100CHH: Mac address for unit 0 base=
AG7100CHH: ff:ff:ff:ff:ff:ff
=======================& Core dev alloc name eth0
pEmacInfo-&Eth_list[0] = 0
[KSWETH][Notice] [ar7100_emac_ada(670)Register_ar7100] Register ar7100 EMAC driver
[KSWETH][Notice] [sweth_core.c(577)RegisterEmacDrv] Register EMAC driver
[KSWETH][Notice] [sweth_core.c(418)InitSwEthObjs] Initialise SW & ETH objects
[KSWETH][Warn] [sweth_core.c(1700)hal_set_port_ma] Driver do not support set MAC address!
Using /lib/modules/2.6.15/net/timereboot.ko
device eth0 entered promiscuous mode
countFlag = 0
Starting pid 38, console /dev/ttyS0: '/sbin/getty'
Login: Using /lib/modules/2.6.15/net/pdt_tunnel.ko
& && && && && && && && && && && && && && && && &&&=========duoduo:0
& && && && && && && && && && && && && && && && && && && && && && & =========duoduo11:0
& && && && && && && && && && && && && && && && && && && && && && && && && && && && &&&=========duoduo222:0
& && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && & the func is disabled....
& && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && & Using /lib/modules/2.6.15/net/adf.ko
& && && &Using /lib/modules/2.6.15/net/asf.ko
& && && && && && && && && && && && && && && &Using /lib/modules/2.6.15/net/ath_hal.ko
& && && && && && && && && && && && && && && && && && && && && && && && && && && && & Using /lib/modules/2.6.15/net/ath_rate_atheros.ko
& && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && &&&Using /lib/modules/2.6.15/net/ath_dev.ko
& && && && && &&&Using /lib/modules/2.6.15/net/umac.ko
& && && && && && && && && && && && && && && && && && &wlan0
& && && && && && && && && && && && && && && && && && && &&&set port wlan0: enable=1 mac: 01:80:c2:00:00:03
& && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && & wlan15
& && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && && & set port wlan15: enable=0 mac: 00:00:00:00:00:00
& && && &set port wlan16: enable=1 mac: 01:80:c2:00:00:03
中校, 积分 7655, 距离下一级还需 2346 积分
签到天数: 653 天[LV.9]以坛为家II
看不懂...................
中尉, 积分 527, 距离下一级还需 474 积分
该用户从未签到
flash_size passed from bootloader = 16
CPU revision is: Using 340.000 MHz high precision timer&&7100de& &支持VLAN
运营商用的 像思科的
中校, 积分 5593, 距离下一级还需 4408 积分
签到天数: 121 天[LV.7]常住居民III
看不懂&&支持支持支持
中尉, 积分 597, 距离下一级还需 404 积分
该用户从未签到
Hit key to stop autoboot&&这一行，按什么键都不会停。用的是RS232串口线，2-3交替。
信息滚完了让输用户名密码，常用的试了几个都不对。。。
有知道的来说声啊
中尉, 积分 597, 距离下一级还需 404 积分
该用户从未签到
怎么没人。。顶一下。
上等兵, 积分 189, 距离下一级还需 12 积分
该用户从未签到
我也有台配置差不多也想刷UNBT或OP，，，不知LZ搞定了没？？？？
中校, 积分 7244, 距离下一级还需 2757 积分
签到天数: 57 天[LV.5]常住居民I
学习下！！！！
中校, 积分 7244, 距离下一级还需 2757 积分
签到天数: 57 天[LV.5]常住居民I
学习下！！！！
新兵上阵, 积分 43, 距离下一级还需 38 积分
该用户从未签到
先留个印，以后再看
新兵上阵, 积分 46, 距离下一级还需 35 积分
该用户从未签到
为什么要刷成ubnt呢？原来的管理配置软件不行么？
Anywlan的金币可以抵扣来买东西了，并且还会经常有免费的积分赠品活动。
Powered by