> Heart Rate Plus
请选择您要上传的头像图片，完成后关闭此弹框即可。
&&&&您所提交的评论已被保存，登录后即可发表
&&&&您已经选择过了。
应用大小：12.1 MB
类别：健康
当前版本：2.1
语言：英语
运行环境：需要 iOS 6.0 或更高版本。与 iPhone、iPad、iPod touch 兼容。 此 App 已针对 iPhone 5 优化。
下载此APP的用户也下载
简介：Heart Rate Plus measure your heart beat with...
Heart Rate Plus应用说明
Heart Rate Plus measure your heart beat with iPhone's camera in seconds. Fast and easy to use! This app measures the micro changes in the color of the blood flowing through your finger.To get an accurate heart rate result, it is better that the device being hold still in a bright environment.Put the tip of your finger on the iPhone's back camera, and your heart rate will be shown.NOTE: Make sure that your fingertip completely and gently covers the camera lens. Pressing too hard reduces blood flow in your finger and it's harder to get a result. Make sure that your fingers are not cold.The measurement will be restarted once your finger cover the lens move. So do not move in measuring heart rate.If the iPhone does not have flash, try to use it in a good lighting environment. The kids could use the thumbnail to cover the lens since the kids' finger is too thin.Check up on ourselves. Anywhere, Anytime, in Seconds!
| | | | | | |
| | | | | | | |
||||||||||||||||||||
iTunes分类排行榜
||||||||||||||||||
京公网安备98
APP111苹果园为用户提供苹果游戏软件介绍,视频,攻略,评测,iphone6游戏,iphone5s游戏下载
iphone5软件下载,ipad mini软件,ipad游戏,最新最全的限时免费游戏信息
16:45:21.871---- 16:45:21.902----31.2001iTunes 的 App Store 中的“Runtastic Heart Rate PRO 心率监测器与脉搏活动追踪器软件专业版”
正在打开 iTunes Store。如果 iTunes 不自动打开，在 Dock 或 Windows 桌面上点击 iTunes 图标。进度指示器
正在打开 iBooks Store。如果 iBooks 未打开，请在 Dock 中打开 iBooks App。进度指示器
如要轻松整理及新增数码媒体收藏，iTunes 是全世界最简单的工具。
我们在您的电脑上找不到 iTunes。 要购买和下载runtastic的Runtastic Heart Rate PRO 心率监测器与脉搏活动追踪器软件专业版，请立即获取 iTunes。
已经有 iTunes 了？ 现在点击「我有 iTunes」以打开 iTunes。
Runtastic Heart Rate PRO 心率监测器与脉搏活动追踪器软件专业版
开发商：runtastic
打开 iTunes 以购买和下载 App。
将你的iPhone转换成你个人的心率监测器 - 是的，那是可能的！ 每个人的最高心率都是不同的，并且我们的静息心率随着我们的年龄和训练水平也在变化。想要了解你的静息心率或你在某一项健身运动之后的心跳有多快吗？获取Runtastic Heart Rate PRO软件专业版不仅来测量你的心跳，也来比较不同的结果，接受进行有规律的心率测量方面的提醒并从大量额外的功能中获益吧。无论是在艰苦的训练环节之后还是在你下一次考试之前 - 我们都能向你展示你的心跳有多快。无需额外的设备，你所需的就只是你的iPhone。这容易极了，对吗？今天就来获取PRO专业版吧！ PRO专业版功能：- 无限量的测量次数：随时随地并且你可以想多频繁就多频繁地来确定你的心率- 使用筛选功能：根据类型（静息心率、健身训练前后心率、最高心率）来对你的测量进行筛选- 以图表形式来监控你的进展：监控你静息心率的发展- 提醒：接受进行有规律的心率测量方面的自动的消息通知- 无广告 软件功能与益处：- 使用你iPhone上的照相机来测量你的心率- 以图表形式显示你心率测量的结果- 不同的测量形式：静息心率、健身训练前后心率、最高心率- 与苹果Health整合- 将你的结果上传至并根据天、周或年来对你的测量结果进行比较与分析- 将你心率的测量结果分享到例如Facebook与Twitter这样的社交网络上，或通过邮件来分享 方便易用- 将你的（食）指轻放在背后的照相机镜头和闪光灯上- 不要按得太用力，否则血液循环会改变，因而影响到测量结果- 当在不用闪光灯的情况下使用iPhone或iPad时，确保在照明良好的地方进行测量（明亮的日光下最佳）- 保持镇静，身体在测量期间尽量不要过多移动，因为这会降低测量结果的精确性- 当血液循环不好时，不要用冰凉的手指进行测量 有效的分析你的静息心率会随着你年龄和训练水平而变化。比起不太运动的人，非常健康的人和运动员的静息心率则较低。迫切地想要了解你的健身水平是否得以提高了吗？有规律地来测量一下你的心率并监控你静息心率的发展吧。 今天就来下载这款Runtastic Heart Rate PRO软件专业版，有规律地来查看一下你的心率并向你的好友们展示你即便处在看似有压力的情况下也能保持冷静吧！ 警示：这个是非医疗产品。
版本 2.0 中的新功能
- 为iPhone 6及iPhone 6+所建立的新算法以使得测量更为精确- 与苹果Health整合- 享受扁平化设计所带来的完全重新设计过的软件体验- 新增语言：巴西葡萄语、土耳其语、俄语 喜爱Runtastic吗？我们的目标是来帮助你提高你的健身水平并鼓励你拥有健康的生活。在App Store里为我们评级并将你的经历告诉给其他人吧。
iPhone 屏幕快照
更新后好用
个人觉得还是非常准的，在平时与运动后分别测量后，都能精确看到心率的变化，而且还可以随时随地测量，非常好用！
想起来就用它看一下自己的状态，发现通过它更加关心自己的身体。
测量挺方便，要是能连接蓝牙心率器直接记录数据就好了
用户购买的还有
?12.00类别: 版本: 2.0大小： 20.2 MB语言: 俄文, 土耳其文, 德语, 意大利语, 日语, 法语, 简体中文, 英语, 葡萄牙文, 西班牙语开发商: runtastic兼容性： 需要 iOS 7.0 或更高版本。与 iPhone、iPad、iPod touch 兼容。 此 App 已针对 iPhone 5、iPhone 6 和 iPhone 6 Plus 优化。
&&&&&98 份评分
&&&&&2213 份评分
runtastic 的更多 iPhone App> Measure Temperature & Heart Rate +
请选择您要上传的头像图片，完成后关闭此弹框即可。
&&&&您所提交的评论已被保存，登录后即可发表
&&&&您已经选择过了。
应用大小：9.1 MB
类别：工具
当前版本：2.3.5
语言：中文,英文
运行环境：与 iPhone、iPod touch、iPad 兼容。 此 App 已针对 iPhone 5 进行优化。 需要 iOS 4.3 或更高版本
下载此APP的用户也下载
简介：See every heart beat on the monitor! Check t...
Measure Temperature & Heart Rate +应用说明
See every heart beat on the monitor! Check temperature now!Thermometer & Heart Rate Meter! Check your heart heart rate & body temperature with iPhone. Monitor your health level with iPhone any where in any time!
This app measure the heart rate & body temperature by detecting and analysis the color change of blood during heart beat. After a series of sophisticated math caculation and transform, the temperature can be calculated with the exact conversion between the heart rate and the body temperature. Steps to use: put the fingertip on the back lens of the iPhone, completely cover the lens, hold the device in still.(it is better to put the hand on a table with device in hand to avoid move for the first times use. any moves may result in the light changes that may impact the measure). Tap the round gauge on the screen to start scan. It may take 20-30 seconds to get the result. A real-time heart beat chart will be shown in the rectangle window. If the chart show good shape like the chart in the screen shot of this app, that means the test is very good. NOTE: Make sure that your fingertip completely and gently covers the camera lens. Pressing too hard reduces blood flow in your finger and it's harder to get a result. Make sure that your fingers are not cold. NOTE: It is better to measure the temperature and heart rate in sitting position with hand lean on the table. The result is not 100% sure, but it is a good start point to reflect the body health level. The measurement will be restarted once your finger cover the lens move. So do not move in measuring heart rate. If the iPhone does not have flash, try to use it in a good lighting environment.
| | | | | | |
| | | | | | | |
||||||||||||||||||||
iTunes分类排行榜
||||||||||||||||||
京公网安备98
APP111苹果园为用户提供苹果游戏软件介绍,视频,攻略,评测,iphone6游戏,iphone5s游戏下载
iphone5软件下载,ipad mini软件,ipad游戏,最新最全的限时免费游戏信息
16:45:25.240---- 16:45:25.271----31.2001Bluetooth Smart (often known as Bluetooth low energy) enables low power devices and sensors to connect to the latest smartphones and tablets. Bluetooth Smart was introduced with the Bluetooth 4.0 specification, and enables a new low power radio. CSR uEnergy(R) silicon provides a complete Bluetooth qualified solution to develop products that make use of the Bluetooth low energy standard .
Bluetooth Smart enables ultra low power connectivity and basic data transfer for applications previously limited by the power consumption, size constraints and complexity of other wireless standards. CSR’s easy-to-integrate, cost-effective Bluetooth low energy platform is enabling new applications for remote controls, watches, sports equipment, health sensors and home automation.
Bluetooth Smart is also enabling a new range of innovative 'appcessories'. Bluetooth Smart ready devices such as the latest Apple iOS devices have an API (CoreBluetooth) that enables developers to create applications to communicate with Bluetooth Smart accessories. With Bluetooth Smart it is possible to develop an application and an accessory without the need for a specific profile. Innovators can build new products that work seamlessly with the smartphone and benefit from the rich user interface and connectivity it provides, while supporting compact hardware accessories with incredible battery life.
Bluetooth Smart has been adopted in Windows 8 as the standard for low power HID (Human Interface Device) accessories. With Windows 8 devices consumers can benefit from long battery life, and no need to install drivers or clog their USB ports with dongles. With the emergence of the Tablet and Ultrabook form factor Bluetooth Smart is set to become the standard for wireless keyboards, mice and touch pads.
CSRmesh(R)
CSR launches its
Development Kit, which will allow developers to get hands on with the recently launched CSRmesh Bluetooth Smart protocol.
The technically disruptive
protocol, which launched earlier this year, allows for an almost unlimited number of Bluetooth Smart enabled devices to be simply networked together and controlled directly from a single smartphone, tablet or PC for the first time. The solution combines a configuration and control protocol with CSR’s proven Bluetooth Smart devices, including the CSR101x(TM) family. CSRmesh has already been adopted by several Tier-One lighting manufacturers, including Samsung, for its smart lighting solutions.
Please be sure to check our
page regularly.
Can't find an answer to your question there?
Bluetooth 4.0 low energy radio with direct single-ended 50Ω antenna connection
16-bit microprocessor with 64Kbytes RAM and 64Kbytes ROM
Switch Mode Power Supply
Up to 32 re-assignable programmable digital IOs
Analogue IOs
PWMs and quadrature decoders
1 uA Integrated key scanning hardware
I2C and SPI peripheral interfaces
UART interface
SDK with compiler and application examples
Integrated Bluetooth 4.0 qualified stack
Master and slave operation
Debug interface
Single-chip uEnergy(R) radio with integrated microprocessor and enhanced memory for greater application flexibility.
Digital IO
32 lead 5x5x0.6mm QFN 0.5mm pitch
56 lead 8x8x0.9mm QFN 0.5mm pitch
32 lead 4x4x0.65mm QFN 0.4mm pitch
CSR offers a number of development kits and demonstration boards for the uEnergy products.
Part Number
Description
CSR1001 Development Kit
PCB with pin header for access to the CSR1001 IO enabling easy prototyping and interface to external devices
CSR1001: Development Board
Board only
CSR1010 Tag Kit
Compact PCB with peripherals to demonstrate proximity tag operation
CSR1010 Tag Board
Board only
CSR1011 Development Kit
PCB with pin header for access to the CSR1001 IO enabling easy prototyping and interface to external devices
CSR1011 Development Board
Board only
Remote Control Evaluation Kit
Remote Control. USB Bluetooth Dongle and PC Software on CD-ROM
Remote Control Development Kit
Full kit. CSR1011 main board
Starter Development Kit
Board. Cable and CD-ROM
CSRmesh development kit
Full development kit, 3x target boards, programmer, cables, batteries
CSRmesh development board
Board only, 1x development board, batteries
Kits contain the following items:
CSR uEnergy USB programmer - This board provides a combined functionality of USB-SPI interface, as well as USB-UART functionality, all in a nice, very small package.
(Not included, or needed, with Starter Development Kit)
uEnergy USB dongle - This allows for testing of demo applications with CSR’s uEnergy Profile Demonstrator Host Application program (Not included with Starter Development Kit)
Development board
Associated cables, button cells, and stub antennas
Boards can also be ordered individually, and ship only with the board and button cell only.
Please also see the
section below for Android and iOS applications to be used with these development kits.
Other locations
CNS10004 Tag Board (v5a)
CNS10017 Development Board (v4a)
CSR has made available two module reference designs based on the CSR1010 and CSR1011 uEnergy products. The designs are fully
and FCC and ETSI compliant. The module reference designs are intended to be integrated directly into an end-product board design and include all necessary manufacturing files.
Description
25.5x18mm, 21 pin, FR4, 2 layer PCB, with printed antenna
35x20mm, 41 pin, FR4, 2 layer PCB, with printed antenna
25.5x18mm, 21 pin, FR4, 4 layer PCB, with chip antenna
Hardware design review templates
Power supply design guide
Inverted-F printed circuit antenna (PIFA)
Final RF test certification for CSR1001
Manufacturer
Part Numbers
AT24C128, AT24C256, AT24C512
M24128-BRxx6TP, M24256-BRxx6TP, M24512-Rxx6TP
SDK 2.2.0 and later
FM24C128-xx-T-G, FM24C256-xx-T-G, FM24C512-xx-T-G
SDK 2.2.0 and later
BR24G128F-3A, BR24G256F-3A, BR24G512F-3A
SDK 2.2.0 and later, draws higher current than above
Adesto (formally Atmel)
2.5V to 3.6V so may not allow full battery consumption
Coordiwise
- part number NF1010
A fully functional software development kit (SDK) and supporting documentation is included on CD with the purchase of a development kit.
The integrated development environment is built upon xIDE, and so has a similar look and feel to the SDKs and ADKs that are offered for many other CSR Bluetooth devices.
For additional information and installation instructions, please refer to the .
Complete documentation of the APIs is included in the SDK distribution, along with detailed application notes for each example application.
The SDK also includes example applications that can be run on the CSR1000/CSR1010 tag board or CSR1001/CSR1011 development board.
If you have purchased one of the starter development kits listed below, you can download the latest SDK here.
If you have purchased one of the other dev kits, please use your login information at .
Note: You will need to be a registered user with a valid activation code to download the SDK using the link below.
To register, please see
For details of how to locate, obtain, and use an activation code, please see the
Dev Kit Part Number
Latest SDK
Release Notes
Activation Code
DK-CSR Starter Kit
DK-CSR CSRmesh Kit
DK-CSR-1A,DK-CSR-1A
Requires an approved account on csrsupport.
Contact a .
For older versions please see .
Apple Notification Center Service (ANCS)
( in SDK 2.4) - The Apple Notification Center Service (ANCS) gives Bluetooth accessories (that connect to iOS devices through a Bluetooth low-energy link) a simple and convenient way to access many kinds of notifications that are generated on iOS devices.
Alert Tag - Demonstrates the Alert Notification and Phone Alert Status profiles.
The Alert Notification profile enables a client device to receive information from a cell phone about the incoming calls, missed calls and SMS/MMS messages. The information may include caller ID for an incoming call or sender's ID for email/SMS/MMS but not the actual message contents.
The Phone Alert Status profile enables a client device to receive information related to the Alert Status and Ringer Setting of a phone. This profile also enables the client device to configure the ringer status from the peer device.
Blood Glucose Sensor ( in SDK 2.4) - The Glucose profile is used to obtain the glucose measurement and related data from a Glucose Sensor that exposes the Glucose Service.
Blood pressure Sensor - The Blood Pressure profile is used to obtain the blood pressure measurement and related data from a non-invasive Blood Pressure Sensor that exposes the Blood Pressure service.
Cycling speed and cadence sensor - The CSC profile is used to obtain the CSC measurement and related data from a CSC Sensor that exposes the CSC service.
Environmental Sensor ( in SDK 2.4) - The Environmental Sensing profile enables a Collector device to connect, interact and obtain data from an Environment Sensor that exposes the Environmental Sensing Service.
Health Thermometer - The Health Thermometer profile is used to enable a data collection device to obtain temperature measurement and related data from a thermometer sensor that exposes the Health Thermometer service.
Heart Rate Sensor - The Heart Rate profile is used to enable a data collection device to obtain Heart Rate measurements from a Heart Rate Sensor that exposes the Heart Rate service.
Keyboard - The Keyboard application supports the HID over GATT Profile as above.
In addition, the Keyboard application optionally supports a proprietary HID boot service to remain compatible with early CSR HID implementations.
Keyless Entry System, Automotive (SDK 2.3 and later) - A Keyless Entry System (KES) allows the vehicle (the Host) to be locked and unlocked wirelessly with a remote key fob (the Client) using two custom profiles from CSR.
The Keyless Entry System profile defines the behavior of Key Fob buttons (lock/unlock, trunk, and panic) and when the fob is in proximity to the vehicle.
The Key Bridge profile enables a Key Fob to act as a bridge for information transfer between a vehicle and a smart phone application.
Mouse - The Mouse application supports the HID over GATT Profile.
This application exposes the HID (Version 1.0), Device Information (Version 1.1), Battery (Version 1.0), Scan Parameters (Version 1.0), GAP, and GATT services to realize a wireless mouse application.
Multifunction Steering Wheel (SDK 2.3 and later) - The Multifunction steering wheel application supports the HID over GATT profile.
This application exposes the HID (Version 1.0), Device Information (Version 1.1), Battery (Version 1.0), GAP, and GATT services to realize a wireless steering wheel application.
Run Speed Cadence Sensor - The RSC profile is used to obtain the running speed and cadence data from a RSC Sensor that exposes the RSC service.
Security tag - The Find Me profile defines the behaviour when a button is pressed on a device to cause an immediate alert on the remote connected device. This profile is used to locate devices.
Serial Port Profile ( in SDK 2.4) - The Serial Port Profile applications demonstrate the custom CSR Serial Over GATT profile.
This can be used to send generic data over a BLE link.
Temperature and Pressure Sensor (SDK 2.3 and later) - The Temperature and Pressure Sensor application supports a custom profile (Temperature and Pressure Sensing Profile) which supports collection of
environmental conditions from a sensor.
Time Client - The Time profile is used to obtain the time and other related information from a Time Server that exposes the Time related services. The watch (Time Client), which is generally not expected to be connected to a network or GPS transmitter, synchronises its time and time zone information by connecting to a hand held device e.g. a phone, tablet or laptop, which is normally connected to a network to provide the time and time zone information.
Weight Scale ( in SDK 2.4) - The Weight Scale profile is used to enable a data collection device to obtain data from a weight scale that exposes the Weight Scale Service.
Analogue Input/Output Example - Demonstrates using Analogue Input/Output (AIO) ports.
Digital Programmable Input/Output Example - Demonstrates using Digital Programmable Input/Output (PIO) ports to change LED states and to read the button status.
Pulse Width Modulation Example - Demonstrates using the Pulse Width Modulation (PWM) module to flash LEDs and to sound a buzzer.
Quadrature Encoding Example - Quadrature encoding is used to encode the motion of a rotating shaft/platform.
The pulse patterns generated by a quadrature encoder can be used to digitise the speed and the direction of motion.
Timers Example - Demonstrates timers and timer routines.
UART Input/Output Example - Demonstrates Input/Output over the Universal Asynchronous Receiver/Transmitter (UART) by implementing a simple UART loop-back.
SPI Master ( in 2.4) - Demonstrates using the PIO Controller as a SPI master.
SPI Slave ( in 2.4) - Demonstrates using the PIO Controller as a SPI slave.
Documentation for the individual example and chip peripheral applications can be found in the SDK (see 'SDK Support Documentation' under the Help Documents).
These applications can be tested and demonstrated using the CSR uEnergy Profile Demonstrator host application.
As of uEnergy SDK 2.1, the Profile Demonstrator host application is installed with the SDK.
In conjunction with a uEnergy USB dongle, this program allows a Windows PC running the application to act in a Bluetooth Smart Central role. The user can then find, connect, and exchange data with Bluetooth Smart peripheral devices.
The purpose of the OTAU host application is to provide a means to update the Application in a Target device from a source file.
Source Code
Documentation
For use with OTAU v5 and v6, up to SDK 2.4.5
For use with OTAU v5 and v6, up to SDK 2.4.5
In addition to the Profile Demonstrator described in the previous section, CSR also provides a PC software tool suite that includes the following utilities:
Documentation
Production and test tool suite including NVM programming
e2cmd - command line utility that allows for programming of EEPROM
nvscmd – command line utility that allows for programming of SPI flash or EEPROM
CsConfig - uEnergy Configuration Store Application, a Windows GUI tool used to view and modify configuration keys in SPI flash and EEPROM
csconfigcmd - command line version of the above tool
Production test APIs – allows the production test system developer the ability to incorporate the test functionality of CSR's production test software into a more production test friendly package.
uEnergyTest – uEnergyTest enables RF and general hardware testing of CSR μEnergy devices. Test modes are run on-chip, using production test (Ptest) firmware, which is downloaded to the device by the application.
Hardware - tests such as setting/clearing of PIOs, loop-backs, etc.
RF - tests such as continuous Tx, Rx, and CW testing
The SDK does not run natively on MAC OS.
However, the SDK can run under a Windows “virtual machine” installation on a MAC.
Some options for that are:
To assist developers of Apple iOS-based apps, a programming utility was developed that programs an image to a CSR device. This utility works with the CSR uEnergy USB Programmer. The utility can be found .
Note that this tool will only download previously generated binary images, has only been tested on the CSR100x devices, and is no longer supported by CSR.
On Google Play
- View reported pulse information as RR-interval and beats per minute values as well as expended energy.
- View reported cycling speed, cadence and distance.
- View reported running speed, cadence and stride length information.
- this apk file contains the CSR uEnergy Heart Rate Collector demonstrator application for the Android 4.3 operating system. The application is designed to work with the heart rate example on-chip application included in the CSR uEnergy SDK 2.x.
NOTE: This application only runs on Android 4.3 devices that officially support Bluetooth 4.0 connectivity (e.g. Nexus 4).
In order to install this application, you need to enable the installation of applications from sources other than Google Play Store. Open the "Device Settings", select the "Security" option and tick the "Unknown sources" checkbox under the "Device administration" section. Then navigate to this page using the internet browser on your device, open the file and confirm the installation.
Source Code
for CSR uEnergy apps for the Android 4.3 or greater operating system.
This includes source to the following example applications
Heart Rate Collector
Cycling Speed
Running Speed
Additionally skeleton code is also included that can be extended to create new BT Smart applications. The included examples are designed to work with the on-chip applications included within the CSR uEnergy SDK 2.x.
For Android development and API reference, please see the
link in the
section below.
- the BLE uEnergy App helps users to monitor health information, such as blood pressure, heart rate, and blood glucose levels, when connected to CSR sensor products using Bluetooth Smart.
It supports the following applications:
Source Code
source code for CSR uEnergy apps for the iOS operating system (version 6.0+).
This includes source code for the following applications
Heart Rate – displays the heart rate information, such as BPM, RR value and Energy in kJ
Blood Pressure – reads blood pressure measurement information, such as Blood Pressure in mmHg or kPa and pulse rate in BPM
Glucose – reads blood glucose measurement information and related data from a glucometer
Security Tag – Using Security Tag feature to send notification. E.g. Low/High alert.
Health Thermometer – reads body temperature measurement information from a health thermometer
RSC Sensor – displays RSC measurement information, including instantaneous speed, instantaneous cadence in RPM, instantaneous stride length, and total distance in meters
CSC Sensor – displays CSC measurement information, such as average speed, wheel revolutions, and crank revolutions
For iOS development and API reference, please see the
link in the
section below.
For Windows 8 development and API reference, please see the
link in the
section below.
- a Java library that simplifies the work with Bluetooth SMART devices
- Introduction slides for Bluetooth SMART and the CSR uEnergy product family
- Training slides that cover CSR101x overview, a description of the typical life cycle of the application, and implementation of the vendor-specific Bluetooth SMART profiles.
Includes a brief introduction to the GATT/ATT protocol, the CSR uEnergy example application structure, and a step-by-step guide on defining, adding and testing vendor-specific GATT service.
Robin Heydon at Bluetooth World 2013 - Bluetooth Low Energy Basics
What is Bluetooth Low Energy and what are the important features?
How does it work?
What are the next steps?
What is it good for today?
What else can my company do with it?
- In BlueCore and CSR μEnergy SDK projects the database is described using a special object language. This database can be automatically generated by the GATT database generator. This allows the application developer to create the database in an easily readable and maintainable manner without the need for complex binary representations, such as those used for SDP records.
The qualification process of a Bluetooth product requires that the product be tested for compliance to the Bluetooth Specification, and to any country specific regulations for RF emissions.
There are a number of methods available to test the RF performance of CSR's μEnergy products:
Direct Test Mode - Direct Test Mode is supported in CSR μEnergy SDK v1.4 onwards, allowing automated testers such as the ANRITSU(R) MT8852B or the ROHDE & SCHWARZ(R) Bluetooth Tester
(CBT) to connect directly to the CSR10xx IC without the need for additional interfacing software. This utilises a "2-wire" serial interface as described in the Bluetooth Specification V4.0 available from the Bluetooth SIG (www.bluetooth.org).
For additional information see the
application note (included with the SDK as of 2.2).
CSR μEnergyTest Application - uEnergyTestApp.exe is included in CSR μEnergy Tools and uses uEnergyTest.dll to present a user interface allowing each test to be performed manually by the user.
For more information see the
CSR μEnergyTest API DLL - uEnergyTest.dll is included in CSR μEnergy Tools with support for C++, C# and VB allowing custom software to be interfaced to the CSR10xx via SPI.
CSR μEnergy Tester Interface - This CSR application monitors the RS232 output of the tester, and provides a transparent pipe between the automated tester such as the ANRITSU(R) MT8852B or the ROHDE & SCHWARZ(R) Bluetooth Tester
(CBT) and SPI port of the CSR10xx device via uEnergyTest.dll.
- CSR μEnergy PTest firmware is released as part of the CSR μEnergy Tools, and is downloaded to CSR10xx ICs to enable RF and other hardware test modes.
- Typically FCC and ETSI test houses require transmitting or receiving packets on one or more different channels.
This is a short guide on how to set up the CSR10xx products to do this.
Access a wide range of resources to enable you to get your end product tested and qualified, please see the SIG's
For a complete list of all qualified devices to date, please visit the .
As of February 1st, 2014, the Bluetooth SIG introduced a new streamlined qualification and listing process and revised fee structure for all new product listings.
For further information, see the SIG's
– the definitive source on Bluetooth SIG programs, initiatives, and technology development
- access core specifications, standard and GATT-based profiles, protocols and errata service release documents.
- a living document listing assigned numbers, codes and identifiers in the Bluetooth(R) wireless standard
- provides the source code you need to quickly develop Bluetooth Smart apps that work on tablets, smartphones, or PCs across Android 4.3, iOS, OSX and Windows 8 OS platforms.
- In case you just can't get enough of Bluetooth Smart.