The page is temporarily unavailable
nginx error!
The page you are looking for is temporarily unavailable.
Please try again later.
Website Administrator
Something has triggered an error on your
This is the default error page for
nginx that is distributed with
It is located
/usr/share/nginx/html/50x.html
You should customize this error page for your own
site or edit the error_page directive in
the nginx configuration file
/etc/nginx/nginx.conf.The page is temporarily unavailable
nginx error!
The page you are looking for is temporarily unavailable.
Please try again later.
Website Administrator
Something has triggered an error on your
This is the default error page for
nginx that is distributed with
It is located
/usr/share/nginx/html/50x.html
You should customize this error page for your own
site or edit the error_page directive in
the nginx configuration file
/etc/nginx/nginx.conf.查看: 7050|回复: 93
酷派大神F2移动版丢失串号、误入fastmmi mode救砖教程
首先感谢ydss忘记月亮 大神的指导
作为大神，果然不是盖的
事情起由：
本人手机昨天变砖
救活后，串号丢失
几经努力，无法恢复
于是消除了开机root字样，准备送修
就在这时，突然找到解决办法（下边详细说明）
串号神奇的恢复了
于是激动万分，刷入第三方rec
重启进rec欲刷机
惨了！竟然只能进fastmmi mode
这才想起没有再次申请解锁
不知道是不是这个原因
总之线刷、卡刷（第三方rec和官方rec都可刷入，在电脑工具里可以进入）
都不能开机
幸得月亮大神不吝赐教
终于解决此问题
解决方法：
游客，如果您要查看本帖隐藏内容请
如果转发本教程请标注本教程地址:
下边再说下线刷恢复串号
游客，如果您要查看本帖隐藏内容请
1725.png (106.79 KB, 下载次数: 53)
14:46 上传
1726.png (109.33 KB, 下载次数: 25)
14:46 上传
1727.png (70.46 KB, 下载次数: 15)
14:46 上传
1728.png (67.48 KB, 下载次数: 15)
14:46 上传
以上教程只是我自己慢慢摸索的笨方法
有更方便方法的机油请补充
比如卡刷恢复串号什么的
因为大神F1我用过卡刷的
但是F2没再尝试
再次感谢@忘记月亮 大神的无私帮助
大神F2有你更精彩
串号恢复安卓通用吗
q求教啊，手机挂了啊
谢谢分享顶顶顶顶顶顶顶顶顶顶顶顶顶顶id那个
支持支持支持
我的串号丢了
dsffffffffffffffffffzvxccccccccccccc
我的手机也没信号了 试试看这个方法了
下载看看教程，在动手
Copyright &
深圳信壹网络有限公司.版权所有From CyanogenMod
is a small tool that comes with the
(software developer kit) that can be used to re-flash
on your device.
It is an alternative to the
mode for doing installations and updates.
Because fastboot mode can start on your device even before Android loads (and can even run when Android isn't installed at all), fastboot mode is useful for updating the firmware quickly, without having to use a recovery mode.
In fact, it's frequently the preferred way to initially install the recovery image on many devices.
Fastboot can also be used for developer operations like unlocking the bootloader of Google's Nexus devices.
Not all devices support fastboot, but many do.
There are two "sides" to using fastboot-- the computer side and the device side.
Typically your device first is connected to your computer via a USB cable.
Then you boot to the "fastboot mode" on the device.
On your computer, you then run the fastboot tool to issue commands. Please note that fastboot commands will ONLY work while the device is in fastboot mode.
See here for , and thus fastboot, for your computer.
Helpful Tip
On some GNU/Linux distributions, you can install adb and/or fastboot through repository-provided packages.
On Debian, beginning with jessie and also available in wheezy-backports, you can install with them this command:
apt-get install android-tools-adb android-tools-fastboot
On Fedora, you can install them with this command:
yum install android-tools
On Arch Linux, you can install them with this command:
pacman -S android-tools
Open a command prompt with Administrator privlidges
Navigate to the directory that contains the fastboot command. If you installed the Android SDK, this will usually be located in &path to SDK&\sdk\platform-tools\fastboot.exe
Example of path for Android SDK installed in root C: directory - C:\adt-bundle-windows-x86_64-2013xxxx\sdk\platform-tools
Verify that your phone is in fastboot mode and is being seen by fastboot by issuing fastboot devices. The output should show your device's serial number:
C:\adt-bundle-windows-x86_64-2013xxxx\sdk\platform-tools&fastboot devices
The serial number listed should match the serial number displayed on the phone fastboot screen.
If nothing appears, double check your connection. If an error displays, refer to the below sections.
For "Command not found" errors, see the following wiki page for help.
If you see &waiting for device& at any point when executing fastboot command, the PC is not configured to use fastboot properly. Most typically, this is because you are not running fastboot with elevated privileges.
It may also be that you do not have the drivers correctly installed, which may happen under Windows 8 because of its insistence on signed drivers.
Temporary solution: Run fastboot as root or with sudo. Better, more permanent solution: create a /etc/udev/rules.d/51-android.rules file as documented in .
Run fastboot in command prompt as an Administrator.
Make sure the output of fastboot devices returns your device serial number or you will never get past this error message.
If you have verified that you are running fastboot as Administrator and are still receiving &waiting for device&, there may be an issue with the drivers not being installed.
With the phone in fastboot mode and plugged in via USB cable:
Open the Devices and Printers menu of the Control Panel.
Verify that your phone is showing up as a device. Typically it will show up under the Unspecified section.
If the phone is showing up with a yellow exclamation point, then the drivers will need to be manually installed.
The Android SDK includes USB drivers under &path to SDK&\sdk\extras\google\usb_driver
If the phone does not show up at all, reboot the phone into fastboot mode while the USB cable is still plugged in. If still no luck, try changing USB cables or ports on your computer. Do NOT use a USB hub.
If you have a Sony device (eg Xperia), you can easily install the drivers for you device by downloading Androxyde's Flashtool from . Use the auto-installer in the .../drivers directory.
To install these drivers in Windows 8, you will need to disable driver signing.
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
fastboot oem unlock (for all Google-branded Nexus devices)
Some Samsung devices use a program called , which offers functionality similar to fastboot.
You can learn more about installing and compiling Heimdall .