From Wikipedia, the free encyclopedia
This article has multiple issues. Please help
or discuss these issues on the .
This article needs additional citations for . Please help
by . Unsourced material may be challenged and removed. (June 2014)
This article contains . The purpose of Wikipedia is to present facts, not to train. Please help
either by rewriting the how-to content or by
(June 2014)
The examples and perspective in this article deal primarily with the United States and do not represent a
of the subject. Please
and discuss the issue on the . (January 2014)
This article may require
for tone. You can assist by . (January 2014)
Mold assessment and mold remediation are techniques used in occupational health to identify the location and extent of the mold hazard in a structure and remove or clean up mold from an indoor environment.
Main article:
Molds are ubiquitous in nature, and mold spores are a common component of household and workplace dust. However, when spores are present in large quantities, they are a health hazard to humans, potentially causing allergic reactions and respiratory problems.
Some molds also produce
that can pose serious health risks to humans and animals. The term "toxic mold" refers to molds that produce , such as , not to all molds. Exposure to high levels of mycotoxins can lead to neurological problems and in some cases death. Prolonged exposure, e.g., daily workplace exposure, can be particularly harmful.
Symptoms of mold exposure can include:
Nasal and sinus congestion, runny nose
Eye irritation, such as itchy, red, watery eyes
Respiratory problems, such as wheezing and difficulty breathing, chest tightness
Throat irritation
Skin irritation, such as a rash
Sneezing/Sneezing fits
Infants may develop respiratory symptoms as a result of exposure to a specific type of fungal mold, called Penicillium. Signs that an infant may have mold-related respiratory problems include (but are not limited to) a persistent cough and/or wheeze. Increased exposure increases the probability of developing respiratory symptoms during their first year of life. Studies have shown that a correlation exists between the probability of developing asthma and increased exposure Penicillium. The levels are deemed no mold to low level, from low to intermediate, from intermediate to high.
Mold exposures have a variety of health effects depending on the person, some people are more sensitive to mold than others. Exposure to mold can cause a number of h throat irritation, nasal stuffiness, eye irritation, cough and wheezing, as well as skin irritation in some cases. Exposure to mold may also cause heightened sensitivity depending on the time and nature of exposure. People at higher risk for mold allergies are people with chronic lung illnesses, which will result in more severe reactions when exposed to mold.
There has been sufficient evidence that damp indoor environments are correlated with upper respiratory tr coughing, and wheezing in people with asthma.
Molds are found everywhere inside and outside, and can grow on almost any substance when moisture is present. Molds reproduce by , which can be carried by . When these spores land on a moist surface that is suitable for life, they begin to grow. Mold is normally found indoors at levels that do not affect most healthy individuals.
Because common
are capable of sustaining mold growth, and mold spores are ubiquitous, mold growth in an indoor environment is typically related to water or moisture indoors. Mold growth may also be caused by incomplete drying of flooring materials such as concrete. , leaky roofs, building maintenance problems, or indoor
problems can lead to mold growth inside. Interior moisture vapor commonly condenses on surfaces cooler than the moisture containing air which enables mold to flourish. This moisture vapor passes through walls, ceilings and condenses typically in the winter months in climates where the heating cycle is extended. Floors over crawlspaces and basements (without vapor barriers or with dirt floors) are also problem areas. (The "doormat test" is very good at detecting moisture vapor emanating from under concrete slabs that are missing a sub-slab vapor barrier. )
For significant mold growth to occur, there must be a source of water (which could be invisible ), a source of food and a substrate capable of sustaining growth. Common building materials, such as , , , carpets, and carpet padding are food for molds. In carpet, invisible dust and cellulose are the food sources (see also ). After a single incident of water damage occurs in a building, molds grow inside walls and then become
until a subsequent incid this illustrates how mold can appear to be a sudden problem, long after a previous flood or water incident that did not produce such a problem. The right conditions reactivate mold. Studies also show that mycotoxin levels are perceptibly higher in buildings that have once had a water incident (source: ).
Although this home suffered only minor exterior damage from , small leaks and inadequate air flow permitted this mold infestation.
After a major storm or flood one should look out for any signs of hidden mold growth. One can detect mold by the smell and any sign of water damage on the walls or ceiling. Mold can grow in many places that are not visible to the human eye in the indoor environment. Mold is often found behind wallpaper or paneling, the topside of ceiling tiles, back side of dry wall, or the underside of carpets or carpet padding. Piping inside the walls may also be a source of mold growth since pipes often leak and cause moisture and condensation. One must also check in roof materials above ceiling tiles since roofs often leak and water collects inside the walls and insulation. If one is suspicious about mold growth one should investigate with caution to prevent exposure to mold.
Spores need three things to grow into mold:
Nutrients: Cellulose is a common food for spores in an indoor environment. It is the part of the cell wall of green plants.
Moisture: Moisture is required to begin the decaying process caused by the mold.
Time: Mold growth begins between 24 hours and 10 days from the provision of the growing conditions. There is no known way to date mold.
Mold colonies can grow inside building structures. The main problem with the presence of mold in buildings is the inhalation of mycotoxins. Molds may produce an identifiable smell. Growth is fostered by moisture. After a flood or major leak, mycotoxin levels are higher in the building even after it has dried out (source: ).
Food sources for molds in buildings include -based materials, such as wood, , and the paper facing on both sides of drywall, and all other kinds of , such as soap, fabrics, and dust containing skin cells. If a house has mold, the moisture may be from the basement or crawl space, a leaking roof, or a leak in plumbing pipes behind the walls. People residing in a house also contribute moisture through normal
and . Insufficient ventilation can further enable moisture build-up. Visible mold colonies may form where ventilation is poorest, and on perimeter walls, because they are coolest, thus closest to the .
If there are mold problems in a house only during certain times of the year, then it is probably either too , or too drafty. Mold problems occur in airtight homes more frequently in the warmer months (when humidity reaches high levels inside the house, and moisture is trapped), and occur in drafty homes more frequently in the colder months (when warm air escapes from the living area into unconditioned space, and condenses). If a house is
during the winter, this can create conditions favorable to mold. Moving air may prevent mold from growing since it has the same
effect as lowering humidity. Molds grow best in warm temperatures, 77 to 86 °F (25 to 30 °C), though some growth may occur anywhere between 32 and 95 °F (0 and 35 °C).
Removing one of the three requirements for mold reduces or eliminates the new growth of mold. These three requirements are:
Moisture - the key factor. Remove the water, moisture AND humidity and future growth stops.
Food source for the mold spores (dust, dander, etc.)
Warmth (mold generally does not grow in cold environments).
systems can create all three requirements for significant mold growth. The A/C system creates a difference in temperature that allows/causes condensation to occur. The high rate of dusty air movement through an HVAC system may create ample sources of food for the mold. And finally, since the A/C system is not always running - the ability for warm conditions to exist on a regular basis allows for the final component for active mold growth.
Because the HVAC system circulates air contaminated with mold spores and sometimes toxins, it is vital to prevent any three of the environments required for mold growth. A) Highly effective return air filtration systems are available that eliminate up to 99.9% of dust accumulation (as compared to 5% elimination by typical HVAC air filters). These newer filtration systems usually require modification to existing HVAC systems to allow for the larger size of electrostatic 99.9% filters. However, thorough cleaning of the HVAC system is required before usage of high efficiency filtration systems will help. Once mold is established, the mold growth and dust accumulation must be removed. B) Insulation of supply air ducts helps to reduce or eliminate the condensation that ultimately creates the moisture required for mold growth. This insulation should be placed externally on the air ducts, because internal insulation provides a dust capture and breeding ground for mold.
The first step in an assessment is to determine if mold is present. This is done by visually examining the premises. If mold is growing and visible this helps determine the level of remediation that is necessary. If mold is actively growing and is visibly confirmed, sampling for specific species of mold is unnecessary.
These methods, considered non-intrusive, only detect visible and odor-causing molds. Sometimes more intrusive methods are needed to assess the level of mold contamination. This would include moving furniture, lifting and/or removing carpets, checking behind wallpaper or paneling, checking in ventilation duct work, opening and exposing wall cavities, etc.
Careful detailed visual inspection and recognition of moldy odors should be used to find problems needing correction. Efforts should focus on areas where there are signs of liquid moisture or water vapor (humidity) or where moisture problems are suspected. The investigation goals should be to locate indoor mold growth to determine how to correct the moisture problem and remove contamination safely and effectively.
In general, the EPA does not recommend sampling unless an occupant of the space is . When sampling is necessary it should be performed by a trained professional who has specific experience in designing mold-sampling protocols, sampling methods, and the interpretation of findings. Sampling should only be conducted to answer a pertinent question: examples "what is the spore concentration in the air", or "is a particular species of fungi present in the building." The following additional question should be asked before sampling: "what action can or should a person take upon obtaining data."
The sampling and analysis should follow the recommendations of
(EPA), and the
(AIHA). Most importantly, when a sample is taken the proper
should be adhered to. The AIHA offers lists of accredited
that submit to required quarterly proficiency testing.
Three types of sampling include but are not limited to::
Air sampling: the most common form of sampling to assess the level of mold. Sampling of the inside and outdoor air is conducted and the results to the level of mold spores inside the premises and outside are compared. Often, air sampling will provide positive identification of the existence of non-visible mold.
Surface samples: sampling the amount of mold spores deposited on indoor surfaces (tape, and dust samples)
Bulk samples: the removal of materials from the contaminated area to identify and determine the concentration of mold in the sample.
When sampling is conducted, all three types are recommended by the AIHA, as each sample method alone has specific limitations. For example, air samples will not provide proof of a hidden source of mold. Nor would a tape sample provide the level of contamination in the air.
Though not usually recommended, air sampling following mold remediation is usually the best way to ascertain efficacy of remediation, especially when health concerns of individuals may be at risk, However, the sampling should be properly conducted by a qualified/certified third party following a defined industry standard.[]
The first step in solving an indoor mold problem is ALWAYS stopping the source of moisture. Mold will begin to grow on porous surfaces within 24–48 hours. Next is to dry the area without spreading the mold dust and spores while beginning remove the mold growth.
A common remedy for small occurrences of mold would usually include wet cleaning with household cleansers. Care should be taken not to spread or inhale the mold dust and spores.
There are many ways to see . There are also cleaning companies that specialize in
- a process by which mold and mold spores are removed from clothing to eliminate odor and prevent further mold growth and damage to the garments.
Improper methods for cleaning mold include exposure to high heat, dry air, sunlight (particularly UV light), , and application of . Both of these last two (ozone and fungicides) are dangerous and if not properly executed, fatal to humans and animals. These methods may render the mold non-viable, however, the mold and its by-products can still elicit negative health effects. As noted in following sections, the only proper way to clean mold is to use detergent solutions that physically remove mold. Many commercially available detergents marketed for mold clean-up also include an anti-fungal agent. However, note that these anti-fungal liquids must be EPA approved, properly labeled, and used in accordance with the stated directions.
Significant mold growth may require professional mold remediation to remove the affected building materials and eradicate the source of excess moisture. In extreme cases of mold growth in buildings, it may be more cost-effective to condemn the building rather than clean the mold to safe levels.
The goal of remediation is to remove or clean contaminated materials in a way that prevents the emission of fungi and dust contaminated with fungi from leaving a work area and entering an occupied or non-abatement area, while protecting the health of workers performing the .
The purpose of the clean-up process is to eliminate the mold and fungal growth and to remove contaminated materials. As a general rule, simply killing the mold with a
is not enough. The mold must be removed since the chemicals and , which cause a reaction in humans, are still present even in dead mold.
Before beginning mold remediation it is important to assess the area infected with mold to ensure safety, clean up the entire moldy area, and properly approach the mold. The EPA provides the following instructions:
Assess the area infected with mold, checking
Identify the source of water or moisture that caused the mold growth before you remove and clean up the moldy area to prevent futur
If the area of mold is large you should hire a remediation manager to properly dispose of the mold
Permanently fix the source of t
Check all air ducts, ventilation systems and air handling units so that the mold problems do not persist in the indoor environment
Consult a qualified professional if you have any problems or if you are not confident that you can properly remove all mold or sources of mold growth
These steps should always be done by a trained professional.
First, make sure to remove any object near the insulation system that may have been contaminated from floodwater. Properly dispose of the contaminated materials according to your local, state, and Federal regulations. (Depending on the age of the unit, the insulation removed may be contaminated with asbestos. If in doubt, always first engage a professional trained in the evaluation of asbestos materials, to avoid serious injury to surrounding parties.
Make sure to remove and dispose of the contaminated HVAC filter media to ensure your HVAC system is not bringing in contaminated air.
Remove any debris and insulation.
Clean all components of the HVAC system to ensure nothing becomes contaminated and/or more contaminated from floodwater. Use a HEPA-filtered vacuum, cleaner to make sure you get rid of all the debris, dirt, and microorganisms. Pay special attention to the drain pans, filter areas, curves, and air ducts since debris often collects in these places.
NOTE that experts including the EPA do NOT recommend cleaning HVAC equipment with anti-microbial cehmicals, as the residue will remain in the systems and ductwork and is hazardous to breathe.
Be sure to use fans to create negative pressure filtration by moving the contaminated air outdoors, and to protect the health of the workers.
Important: If it cannot be cleaned, it must be replaced with new components.
After the HVAC has been properly cleaned, replace the insulation in the HVAC system with an external, smooth-surfaced insulation to prevent future floodwater contamination. There are companies that now provide specially designed replacement ducts and duct insulation.
To ensure occupant safety, have your HVAC system tested by a qualified sampling professional before and when the HVAC system is made operable.
When cleaning up mold it is important to avoid breathing in mold or mold spores, as this can have major health implications. To avoid airborne mold exposure you should wear a respirator to protect your lungs. Half-face or full-face respirators have removable cartridges that will stop the mold spores from entering your nose or mouth. A full-face respirator will also protect your eyes. Be sure to follow the directions carefully, if it does not fit properly or is not put on correctly it may be ineffective.
Filters used with the respirator should ideally be rated P-100. Some cartridges also come with an activated carbon element. The carbon helps to remove the odor given off by mold and mildew.
Protective clothing should also be worn. Disposable hazmat coveralls are available to keep out particles down to one . Protective suits keep mold spores from entering any cuts on the skin.
Next be sure to wear gloves to ensure protection from mold. You should wear gloves made of rubber, nitrile, polyurethane, or neoprene so that no mold or disinfectant materials get through to your skin.
If a half-face respirator mask is used, goggles should be worn to prevent mold spores from infecting the
of the eyes. Goggles must be free from ventilation holes if they are to provide an effective barrier. Full face respirators have an advantage here as the air breathed in is directed to the inside of the lens first which keeps it from fogging as you work.
Wire brushing or sanding is only to be used when microbial growth can be seen on solid wood surfaces such as framing or underlayment (subfloor).
Some companies may use
to remove mold from suitable surfaces, such as wood and cement. Soda Blasting or media blasting[] may also be used to remove mold. Again, these processes are not typically recommended as they force the mold and its bi-products into the surrounding air. The key to removal is collecting the bi-products, not casting them off the material and into the air.
Wet vacuum cleaners are designed to remove water from floors, carpets and other hard surfaces where water has accumulated. Wet vacuuming should only be used on wet materials, as spores may be exhausted into the indoor environment if insufficient liquid is present. After use, this equipment must be thoroughly cleaned and dried as spores can adhere to the inner surfaces of the tank, hoses, and other attachments. This one of the approved removal methods by the EPA.
Damp wipe is the removal of mold from
surfaces by wiping or scrubbing with water and a . Care must be exercised to make sure the material is allowed to quickly dry to discourage any further mold growth. With surfaces such as metal, glass, hardwood, plastics, and concrete, mold should be wet scraped or wiped as much as possible. Then, depending on the porosity of the surface, it may be appropriate to scrub the surface with a moldicide or fungicide cleaner.[]
filtered vacuum cleaners are used throughout the remediation areas after materials have been thoroughly
and all contaminated materials have been removed. HEPA vacuum cleaners are recommended for the cleanup of the outside areas surrounding the remediation area. During this process the workers wear proper personal protective equipment (PPE) to prevent exposure to mold and other contaminants. The collected
should be stored in impervious bags or containers in a manner to prevent any release of debris.
Building materials and
contaminated with mold should be placed into impervious bags or closed containers while in the remediation area. These materials can usually be discarded as regular .
Several types of equipment may be used in the remediation process and may include:
: a tool that measures the moisture level in building materials. It can also be used to measure the progress of the drying of damaged materials. Pin moisture meters have a small
that is inserted into the material. Pinless moisture meters usually have a flat sensing area that is pressed directly against the material's surface. Moisture meters can be used on , , , , and other .
: measures the amount of humidity in the indoor environment. Often gauges are paired with a thermometer to measure the temperature.
: a hand-held tool that allows the user to see potential mold problems inside walls, ceilings, crawl spaces, and other tight spaces. It consists of a camera on the end of a flexible “snake”. No major drilling or cutting of dry wall is required.
: used to document findings during assessment.
(PPE): includes , gloves, impervious suit, and . These items can be used during the assessment and remediation processes.
 : Infrared thermal imaging cameras are often used (and effective) in addition to moisture meters to double check moisture meter findings, and look at the broader picture. They help mainly in identifying auxiliary points of moisture intrusion.
During the remediation process, the level of contamination dictates the level of protection for the remediation workers. The levels of contamination are described as Levels I, II, III, and IV. Each has specific requirements for . The levels are as follows:
Note that there are differences of opinion as to the size and categorization of levels of isolation based on recommendations from state and Federal guidelines, so use judgement when using and determining the usefulness of the below levels of categorization. Keep in mind, that more isolaion and compartmentalizing of affected areas is the key to eliminate the spread of mold spores and mold debris. Overkill is not necessary as long as air-secure boundaries are maintained to protect the building space, especially when occupied during remediation. The key is not to allow elements from the damaged areas to infect other parts of the building.
Small Isolated Areas (10 sq ft (0.93 m2) or less) for example, , small areas on walls.
Remediation can be conducted by the regular building staff as long as they are trained on proper clean-up methods, personal protection, and potential hazards. This training can be performed as part of a program to comply with the requirements of OSHA Hazard Communication Standard ( 29 CFR ).
Respiratory protection (for example, N-95 disposable respirator) is recommended. Respirators must be used in accordance with the OSHA respiratory protection standard (29 CFR ). Gloves and eye protection should also be worn.
The work area should be unoccupied. Removing people from spaces adjacent to the work area is not necessary, but is recommended for infants (less than 12 months old), persons recovering from recent surgery, immune-suppressed, or people with .
Containment of the work area is not necessary. However, misting and
is recommended.
Contaminated materials that cannot be cleaned should be removed from the building in sealed impermeable
and disposed of as ordinary waste.
The work area(s) used by workers for access/egress should be cleaned with a damp cloth or
and a detergent.
All areas should be left dry and visibly free of contamination and debris.
Mid-sized Isolated Areas (10-30 sq ft) – for example, individual wallboard panels.
Remediation can be conducted by the regular building staff as long as they are trained as for Level I. , occupation of the work and adjacent areas, and handling of contaminated materials are the same as for Level I.
Surfaces in the work area that could become contaminated should be covered with sheet(s) of plastic that are secured in place. This should be done prior to any remediation process to prevent further contamination.
Dust suppression methods, such as misting (not soaking) surface prior to remediation, are recommended.
The work area(s) used by workers for access/egress should be HEPA vacuumed and cleaned with a damp cloth or mop and a detergent.
As with Level I, all areas should be left dry and visibly free of contamination and debris.
Large Isolated Areas (30-100 sq ft) – e.g., several wallboard panels
or other environmental health and safety professionals with experience performing microbial investigations and/or mold remediation should be consulted prior to remediation activities to provide oversight for the project.
It is recommended that personnel be trained in the handling of
and equipped with respiratory protection (N-95 disposable respirator).
must be used in accordance with OSHA respiratory protection standard (29 CFR ) Gloves and eye protection should also be worn.
Surfaces in the work area and areas directly adjacent that could become
should be covered with a secured plastics sheet(s) before remediation to contain dust/debris and prevent further contamination.
in the work area and areas directly adjacent with plastic sheeting.
The work area and areas directly adjacent should be unoccupied. Removing people from spaces adjacent to the work area is not necessary, but is recommended for infants (less than 12 months old), persons recovering from recent , immune-suppressed or people with respiratory diseases.
Dust suppression methods, such as misting (not soakings) surface prior to remediation, are recommended.
Contaminated materials that cannot be cleaned should be removed from the building in sealed impermeable plastic bags and disposed of as ordinary waste.
The work area/areas used by workers for access/egress should be HEPA vacuumed and cleaned with a damp cloth or mop and a detergent.
All areas should be left dry and visibly free from contamination and debris.
Extensive Contamination (greater than 100 contiguous sq. ft in an area).
Personnel trained in handling of hazardous materials and equipped with:
Full face respirators with HEPA cartridges
Disposable protective clothing covering the entire body including the head, shoes and hands
Containment of the affected area:
Complete isolation of the work area from occupied spaces using plastic sheeting sealed with duct tape ( including ventilation duct/grills, fixtures, and other openings
The use of an exhaust fan with a HEPA filter to generate negative pressurization, a , and
Contaminated materials that cannot be cleaned should be removed from the building in sealed
plastic bags and disposed of as ordinary waste.
The contained area and decontamination room should be HEPA vacuumed and cleaned with a damp cloth or mopped with a detergent solution and be visibly clean prior to the removal of any isolation barrier.
Finally, after the moisture source has been eliminated and the mold growth removed, the premises should be revisited and then re-evaluated to ensure the mold growth and the remediation process was successful. The premises should be free of any moldy smell, visible growth, reoccurring moisture, and if necessary, an acceptable air and wiped fungal assessment of remaining toxicity.
In order to prevent mold from growing in your home one should do the following:
Clean and repair roof gutters on a regular basis so that moisture will not seep into your house from the gutters
If you are using an air conditioning machine you should make sure to
also make sure the drain lines are not being obstructed by anything so that it can flow properly
Humidity in the indoor environment is a major problem that can lead to mold growth if it is not kept below sixty percent. If you are not certain what the humidity level in your home is you can purchase a humidity meter at any hardware store.
If you see any moisture or condensation, you should act quickly by drying the wet surface and finding the water source so it can be avoided in the future.
Any exposed structural wood or wood framing should be encapsulated with an EPA approved fungicidal encapsulation coating after pre-cleaning methods have been applied. Areas of typical concern can be found in homes that have a crawl space and unfinished basement. Attic's with poor ventilation can have spikes of high humidity throughout the year and can benefit from using an EPA approved fungicidal encapsulation coating.
. National Institute for Occupational Safety and Health. August 1, 2008.
Minnesota Department of Health. . Minnesota North Star 2011.
Gent, Janneane.
(PDF). Department of Epidemiology and Public Health, Yale University 2011.
Cohen, Aaron.
(PDF). World Health Organization 2011.
. by Robert Wewer. FSI Restorations 2014.
. by Robert Wewer. FSI Restorations 2014.
. U. S. Environmental Protection Agency. September .
Niemeier, R. Todd, Sivasubramani, Satheesh K., Reponen, Tiina and Grinshpun, Sergey A., (2006) "Assessment of Fungal Contamination in Moldy Homes: Comparison of Different Methods", Journal of Occupational and Environmental Hygiene, 3:5, 262-273 [1]
(PDF). New York City Department of Health and Mental Hygiene. November .
NIOSH. . Center For Disease Control 2011.
. Environmental Protective Solutions 2014.
. EPA 2014.
: Hidden categories: