032,121.9413,094.923,474.75VanEck Vectors Gold Miners ETF (GDX)NYSEArca - Nasdaq 即時價格。貨幣為 USD。加入追蹤清單23.93-0.44 (-1.81%)收市價： 4:00PM EST24.00 市前： 9:20AM EST其他人也查看以下內容日日日日日日日日日日日日價內期權顯示:清單認購期權範圍日合約名稱上次交易日期拍板收市價買盤賣出價變化% 變化成交量未平倉合約引伸波幅 10:58PM EST18.0016.7016.900.00-10100.00% 3:10PM EST16.5516.6016.750.00-160.00% 11:28AM EST14.5014.4014.60-0.43-2.88%1140.00% 10:58PM EST20.7213.7013.950.00-5100.00% 2:48PM EST12.1011.9512.052003600.00% 8:38AM EST14.1012.1512.350.00-8450.00% 10:17AM EST11.4511.9012.100.00-26493.75% 1:55PM EST10.6010.6010.7512890.00% 3:59PM EST10.009.9510.05759395.31% 12:13PM EST9.150.000.000.00-223120.00% 1:49PM EST8.450.000.000.00-1651,4830.00% 11:19AM EST7.100.000.000.00-401830.00% 9:56AM EST6.150.000.000.00-12290.00% 3:53PM EST5.900.000.000.00-180.00% 3:00PM EST5.150.000.000.00-172040.00% 11:20AM EST4.254.454.6085188.28% 3:34PM EST4.000.000.000.00-378,1480.00% 3:44PM EST3.910.000.000.00-140.00% 3:42PM EST3.000.000.000.00-12424,2330.00% 3:24PM EST2.490.000.000.00-692970.00% 3:59PM EST1.950.000.000.00-38737,6390.00% 3:57PM EST1.450.000.000.00-1126,2170.00% 3:59PM EST0.950.000.000.00-1,30862,0700.00% 3:51PM EST0.510.000.000.00-1,2358,0200.00% 3:58PM EST0.170.000.000.00-5,06960,8811.56% 3:58PM EST0.050.000.000.00-1,6787,99212.50% 3:54PM EST0.020.000.000.00-2,60057,18612.50% 3:31PM EST0.030.000.000.00-2476625.00% 3:31PM EST0.040.000.000.00-4942,42725.00% 3:44PM EST0.010.000.000.00-1150.00% 3:18PM EST0.010.000.000.00-425,53350.00% 10:18AM EST0.010.000.010.00-563,04887.50% 3:50PM EST0.020.000.02110,575115.63% 2:54PM EST0.010.000.010.00-249,662125.00% 11:06AM EST0.010.000.02-0.01-50.00%5033,572150.00% 9:30AM EST0.010.000.02-0.01-50.00%5012,238165.63% 10:57AM EST0.010.000.020.00-126,526181.25% 3:40PM EST0.010.000.020.00-52,754193.75% 2:57PM EST0.010.000.020.00-756,242206.25% 1:04PM EST0.010.010.02-0.01-50.00%3961231.25% 1:04PM EST0.010.010.02-0.01-50.00%25,897246.88% 1:03PM EST0.010.000.02-0.01-50.00%143,999246.88% 1:16PM EST0.010.010.02-0.01-50.00%41,161271.88% 12:50PM EST0.020.000.020.00-133,260268.75% 12:47PM EST0.010.000.01-0.01-50.00%121,919300.00%認沽盤範圍日合約名稱上次交易日期拍板收市價買盤賣出價變化% 變化成交量未平倉合約引伸波幅 12:37PM EST0.010.000.01-0.01-50.00%109675.00% 10:58PM EST0.010.000.020.00-0170650.00% 10:58PM EST0.010.000.020.00-10<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-06-02 10:58PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-20<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-08-16 12:23PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-1<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-06-07 8:42AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-4<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-08-24 8:56AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-2<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-08-31 8:41AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-1<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-12-08 3:16PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="2<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-11-15 3:48PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-10<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-03 10:09AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-<td class="data-col8 Ta(end) Pstart(7px)" data-reactid="<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-03 3:10PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-1<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-04 2:54PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-1<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-12-22 3:01PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="-0.01-50.00%<td class="data-col8 Ta(end) Pstart(7px)" data-reactid="<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-02 2:48PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-<td class="data-col8 Ta(end) Pstart(7px)" data-reactid="<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-12 9:30AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="1<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-11 3:40PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-5140<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-12 3:56PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-24<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-12 3:56PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-<td class="data-col8 Ta(end) Pstart(7px)" data-reactid="<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-16 3:08PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-36<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-17 3:40PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-<td class="data-col8 Ta(end) Pstart(7px)" data-reactid="<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-17 3:57PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-<td class="data-col8 Ta(end) Pstart(7px)" data-reactid="<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-17 3:59PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-<td class="data-col8 Ta(end) Pstart(7px)" data-reactid="<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-17 3:21PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-<td class="data-col8 Ta(end) Pstart(7px)" data-reactid="<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-17 3:54PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-<td class="data-col8 Ta(end) Pstart(7px)" data-reactid="<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-17 11:38AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-26<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-17 11:30AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-64<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-17 11:36AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-312<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-17 2:41PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-5<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-17 11:38AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-<td class="data-col8 Ta(end) Pstart(7px)" data-reactid="<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-12-20 10:03AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-3<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-08 2:27PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-20<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-17 11:23AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-43<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-12-11 12:09PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-29<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-12-07 3:45PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="56<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-01-03 12:57PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-1<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-12-13 3:14PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-18<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-11-24 12:59PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="-0.20-1.60%<td class="data-col8 Ta(end) Pstart(7px)" data-reactid="74<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-12-14 9:47AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="0.00-1228<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-12-15 9:57AM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="13<td class="data-col9 Ta(end) Pstart(7px)" data-reactid="<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-11-24 12:04PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="134<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-12-06 3:40PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="4246<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-12-06 3:40PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="1922<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%<td class="data-col1 Ta(end) Pstart(7px)" data-reactid="-12-04 2:00PM EST<td class="data-col3 Ta(end) Pstart(7px)" data-reactid="<td class="data-col4 Ta(end) Pstart(7px)" data-reactid="<td class="data-col5 Ta(end) Pstart(7px)" data-reactid="2612<td class="data-col10 Ta(end) Pstart(7px) Pend(6px)" data-reactid="%From OSx86
OS X 10.5.6 Hardware Compatibility
Hardware Components
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
Please add hardware into tables.
This is for 10.5.6 builds only.
For how to edit the Wiki, please see
thread. Thank you!
You're looking for an Installation guide? see
Hardware Name (alphabetical)
EFI/Vanilla kernel working
Fully Working w/o Patch
Intel945GT ich7 gma950 USB2.0
Firewire400 GbE
EVERYTHING WORKS, even put to sleep with
a black-out monitor.
( fan on my PS stays on- old style)
I did use osx86 toolbox after I set up my lan,
This runs fast on a t core2duo) But the board will get a t7600 as soon as price get down.
I pd $60-MB $70 2g ram + used cpu, and put into old case with HD n' DVD. LESS than $200
9.5.0 voodoo kernel
OSX86 toolbox
Intel 875P
Intel PIV 3.4 EE
Distro Leo4ALL 10.5.6
Ati X1950PRO AGP with leo4all drivers
2 GB Ram DDR400
NO OVERCLOCK MICRO and VIDEO
9.5.0 voodoo kernel (kernels)
Fully Working no patch needed
Intel P965 & ICH8R
Install Method: Leo4All v3
BIOS Version: 22
Audio: Works
LAN: Works
Install Instructions:
Formatted as Fat32 using XP and Acronis (could've used anything), then erased with disk utility in OSX install
Installed using Vanilla Kernel, and default SMBIOS selections under customize
Complete Install and Reboot
Use -v on first boot
Used NVKush found
Update to 10.5.6 worked but not fully tested yet (using DSDT Patcher )
EFI & Vanilla Kernel works
No patch needed for LAN
NVIDIA nForce 550
usb : work ( usbfix)
Audio: Works ( azalia ) Microphone Jack o 1 x Line In not tested yet
LAN: need patch ( Nforcelan)
Pcie : Asus 7300Gt pro 128mb ( nvdarwin 128 ) Dvi not tested yet
AMD Athlon X2 4800+
3GB DDR2 RAM
keyboard : work ( PS2 key fix ) Mouse : work ( optical usb )
DVDRom Asus CDR-RW IDe ( master )
9.5.0 voodoo kernel (kernels
No patch needed for LAN
NVIDIA nForce 4
USB : works
Audio: Works ( AC97 ) Microphone Jack o 1 x Line In not tested yet
LAN: need patch ( Nforcelan)
PCIe : Point Of View GeForce 9600GT ( nvdarwin 512) OK
AMD Athlon X2 3800+ overclocked@2.4GHz (all cores working)
2GB DDR RAM
keyboard : works ( USB ) Mouse : works ( optical usb )
DVD-R (IDE) : Works
SATA : Works
9.5.0 voodoo kernel
IP35-E / IP35-Pro
Intel P35, ICH9R, ALC888 audio, Yukon 88E8056 lan
Source: iAktos 5i (10.5.5, upgradable to 10.5.6)
Installs fine on IDE optical drive to a SATA HDD
Do the install procedure in the following order:
On iAktos 5i (10.5.5) DVD install, check box only these items: cameleon, dsmos, AppleSMIBIOS-28, Stock ACPI modified, APIC Driver, disabler.kext, Intel SATA, JMicron.
After install completes/reboots at Darwin prompt, boot with -s -v -x
Patch video card as necessary, use of OsX86Tools may work okay at this point.
Update to 10.5.6 with this procedure
Audio: works 100% with this patch , do this only after 10.5.6 update.
LAN: works 100% with this patch , do this only after 10.5.6 update.
don't use OsX86Tools to download & install NVinject video...this bricked my machine twice
update (9 June 2009): other working configurations:
9.5.0 voodoo kernel, EFI v9, Cameleon 1.0.12
Yes, almost all functions working (lan, audio, usb, start/shutdown, time machine) but only after following the procedure outlined here.
Unable to wake from sleep (even with current bios ver. 18).
Have not tested PS/2 ports.
Needed to install a SATA DVD burner to rip/burn DVD/CD's without getting kernal panic.
Also, needed to use the ToH 9.2.0 kernel
in order to successfully launch Parallels without kernel panic.
Hardware Name
EFI/Vanilla kernel working
Fully Working w/o Patch
Intel P35Express & Intel ICH9
Core 2 Duo E Ghz, DDR2 800Mhz 4GB (KingMAX), NVidia 9500GT 1GB DDR2
Installed using iDeneb 1.4 10.5.6
Vanilla Kernel 9.6.0
SMBios Mac Pro
Sleep and Restart works OOB.
Microsoft LX-3000 USB Headset works OOB.
Left everything default with the exception of drivers.
Installed Drivers:
nvInject 0.2.1 (1 GB)
Realtek Ethernet R1000
All drives, including optical, are SATA. IDE has not been tested.
Chameleon 2 RC1/Vanilla kernel 9.6.0
VoodooHDA kext for ALC883 needed
Shutdown with PowerOff Fix.
Hardware Name
EFI/Vanilla kernel working
Fully Working w/o Patch
Intel 975X & Intel ICH7
Install using iatkos 5i 10.5.5
Software update to 10.5.6
Left everything default with the exception of drivers and OHR kext for power management
Installed Drivers:
(this is for the rear sata port)
Marvell Ethernet
All drives, including optical, are SATA. IDE has not been tested.
When overclocking System Profiler recognizes new BUS and CPU speeds.
OHR kext for power management needed
Marvell Ethernet kext needed for netwokring
Hardware Name
EFI/Vanilla kernel working
Fully Working w/o Patch
VIA PT880 ProUltra / VIA VT8237S
Install Method: iPC OS 10.5.6 Final PPF5
Kernel: 9.5.0 Voodoo
BIOS Version: 2.1
BIOS Options: Disabled Serial, Parallel & MIDI Ports, No-Excute Memory Protection = Enabled, HPET Table = Enabled (not taking the Credit)
Intel Dual Core E5200, 2GB DDR2 @667Mhz
Audio: ALC888 in & out stereo working with VoodooHDA.kext
LAN: ViaRhine (II) works (on customize Add Via Rhine Driver)
IDE: Works
SATA: Works
Sleep, Shutdown & Restart Work
"You can correct the Disk Mounting issue by matching your kernel with the proper seatbelt.kext build.
If you have the 9.5.0 kernel you will need the Seatbelt.kext from 10.5.5
If you have the 9.6.0 kernel you will need the Seatbelt.kext from 10.5.6"
iPC install contains 9.5.0 version, just add it at customize.
Issues so far:
Only 1 CPU is active(CPUS=1 One Core Fix, some might need to start the install dvd with cpus=1 boot option)
Fix for 1 CPU issue: download a modified bios,
choose file 4CoreDual-SATA2 v2.10
After you flashed the bios, you can simply install it without the need of the cpus=1 One Core fix, and can use both(or more) cores of your cpu ;)
or use customized patched USB Drivers
Voodoo 9.5.0 Kernel
VIA PT880 Ultra / VIA VT8237A
BIOS Version: ?
Intel Core 2 Duo E6420, 2GB DDR2
Install Method: Kalyway 10.5.2 (touch /var/db/.AppleSetupDone), 10.5.6 Combo UpdateiPC 10.5.6, 10.5.7 Delta Update
Additional Kexts: AppleDecrypt.kext, AppleSMBIOSEFI.kext, IntelCPUPMDisabler.
Seatbelt.kext from 10.5.5
Video: PCI-E ATI 2600XT Pro -
Audio: onboard ALC888 works - either with ALCinject.kext and AppleAzaliaAudio.kext (no mic, line-in, 2 speakers) or with ALCinject.kext and AppleHDA.kext (7.1 but no upmixing like CMSS upmixing works with
and AU Lab with
running in the background)
LAN: onboard VIA VT6103 unstable (); fixed with: PCI-card Realtek RTL8139 (driver ) (don't use AppleRTL8139Ethernet for this card, also unstable!); for network dropping see
IDE: works, for UltraDMA
IOPCIPrimaryMatch 0x in AppleVIAATA.kext
SATA: use IOPCIPrimaryMatch 0xxx 0x 0x 0x 0xx00e310de 0x005410de 0x005510de in AppleVIAATA.kext
Instead of manual patching, you can u tool for patching kexts IORegistryExplorer
Intel 945GCA2 / Intel ICH7
Rev.1, BIOS Version: 1.30 Works On 1.20
Intel Core2Duo E4400 & 2GB DDR2-667 & Works On A Intel Pentium 4 HT 3.00GHz 631 & 3GB DDR2 533 & 667 Dual Channel
Install Method: iPC OSx86 Universal 10.5.6 PPF5 Final Release DVD
Kernel: 9.4.0 StageXNU Universal & 9.5.0 Voodoo
Video: On-broad: Intel GMA950, NVinject 0.2.1 256 VRAM for PCI Express Nvidia 7900GS & PCI Express ATi x1600 for ATi Radeon X1500
Audio: Azalia Audio - 2-channel line-out works OOB; ALC888 (all versions including Legacy AppleHDA kexts) not working
LAN: Realtek R1000
Fixes & Patches selected: Seatbelt.kext, Dual Boot Time Sync, PS/2 Keyboard
IDE, SATA & USB: Work OOB
Sleep, Shutdown & Restart Work OOB
Successfully updated Safari, iTunes & Quicktime Player via Software Update
9.4.0 StageXNU Universal K Vanilla 9.5 Kernel causes boot-up to loop.
Yes, But For ATi Radeon X1500 You Need NatitX.Installer.zip afther installation.
775 Dual-915GL
Intel 915GL
Intel Pentium 4 630 3.0 Ghz
1 Gb DDR2 400 Mhz Dual Channel
Install Method: iPC OSx86 Universal 10.5.6 PPF5 Final Release DVD
Kernel: 9.4.0 StageXNU Universal
"About this mac" works with AppleSMBIOS ToH
Audio: AC97 audio
LAN: PCGenRTL8139
IDE, SATA, & USB work
Shutdown work
9.4.0 StageXNU Universal
Intel Pentium 4 3.0 Ghz Prescott
1 Gb DDR 400 Mhz Dual Channel
Install Method: iPC OSx86 Universal 10.5.6 Final Release DVD
Kernel: 9.5.0 Voodoo
Audio: AC97 audio works with AppleAC97Audio.kext
LAN: VIARhine II works
IDE & USB works, SATA not tested
Sleep, shutdown och restart works
Seatbelt 10.5.5 required for image mounting
"About this mac" works with AppleSMBIOS.kext ToH
Chameleon 1.0.12 + 9.5.0 Voodoo kernel
VIA K8T890 CF
AMD Athlon x64 X2 6400+
4 Gb DDR-2 800 Mhz Dual Channel
Install Method: iPC 10.5.6
BIOS Version: 2.60, Revision: 7/31/2007
Kernel: 9.5.0 Voodoo
Audio: ALC888 audio works with AppleALC888Audio.kext
LAN: works
IDE: works with AppleVIAATA.kext
USB: works
Shutdown and restart works
Seatbelt 10.5.5 required for image mounting
9.5.0 Voodoo kernel
ALiveSATA2-GLAN
VIA K8T890 CF
AMD Athlon x64 X2 3800+
2 Gb DDR-2 800 Mhz Dual Channel
Install Method: iDeneb 1.4 MacOSX 10.5.6
Kernel: 9.5.0 Voodoo
Audio: ALC888 audio works with AppleALC888Audio.kext
LAN: works
IDE: works with AppleVIAATA.kext
USB: works
SATA & SATA-II works with AHCI turned off(because of kernel panic at boot) and AppleJMicronATA.kext
Shutdown and restart works
Sleep doesn't work. Cannot wake up after sleep
Seatbelt 10.5.5 required for image mounting
9.5.0 Voodoo kernel
Intel 945GC / Intel ICH7
BIOS Version:
Intel Core2Duo E5200 and E5300; 2GB DDR2-667
Install Method: iDeneb 1.4 - 10.5.6
Kernel: 9.5.0 Vanilla
Video: GMA950
Audio: Azalia Audio - 2-channel line-out works OOB; A ALC662 not working
LAN: Realtek R1000
Fixes & Patches selected: PS/2 Keyboard
IDE, SATA & USB: Work OOB
Firewire PCI works
Sleep, Shutdown & Restart Work OOB
Successfully updated Safari, iTunes & Quicktime Player via Software Update
9.5.0 Vanilla K
Intel 945GC A2 / Intel ICH7
BIOS Version:
Intel Core2Duo E5200 & 2GB DDR2-667
Install Method: iDeneb 1.4 - 10.5.6
Kernel: 9.5.0 Vanilla
Video: GMA950
Audio: Azalia Audio - 2-channel line-out works OOB; A ALC888 (all versions including Legacy AppleHDA kexts) not working
LAN: Realtek R1000
Fixes & Patches selected: PS/2 Keyboard
IDE, SATA & USB: Work OOB
Sleep, Shutdown & Restart Work OOB
Successfully updated Safari, iTunes & Quicktime Player via Software Update
9.5.0 Vanilla K
Intel(R) P43 + ICH10 Chipsets
BIOS Version: 2.10 (latest original)
Intel Core 2 Quad Q9550 (E0) (Overclocked to 3.32 GHz, stable)
Install Method: iPC 10.5.6 Final
Kernel: 9.4.0 StageXNU Universal Kernel (worked also with few others)
Video: Club 3D HD4890 Super Clocked (see from ATI PCI-e)
Audio: ALC888 (I failed to install but might work)
LAN: Realtek R1000, drivers used. Works.
IDE, SATA & USB: Works well
Sleep, Shutdown & Restart Works
Successfully updated Safari, iTunes & Quicktime Player via Software Update
9.4.0 StageXNU Universal Kernel it installed also well with other's. I don't know why this kernel is now installed but works well so...
Yes, no sounds as far
NVIDIA GeForce 6150SE / nForce 430
AMD Athlon 64 X2 Dual Core
Install Method: iPC 10.5.6 Final
Kernel: 9.5.0 Voodoo
BIOS Version: Original
BIOS Options: left all at default settings
Video: GeForce 9800 GTX
Audio: Sound Blaster Audigy (kxAudioDriver)
LAN: Realtek
RTL8211 (nForce 4 driver worked)
IDE, SATA & USB: Works well
Sleep, Shutdown & Restart Works
Patches applied: Seatbelt.kext, Shutdown/restart fix
Installation issues:
iAtkos v7 and iDeneb v1.6 procuded a "waiting for root device" error during install.
iPC 10.5.6 produced a kernel panic after installation completed while system was attempting to reboot. No kernel panics encountered after booting into Mac OS X and using shutdown/restart
9.5.0 Voodoo kernel
Yes, except for Windows Sharing which appears to be missing from network options.
Hardware Name
EFI/Vanilla kernel
Installation Notes
Intel 845D
Install Method: iPC (Leopard 10.5.6)
Vooodoo 9.5.0 Kernel
Chipset Intel ICHx
Realtek 8139 LAN: 100%
Toh SMBIOS
Chameleon bootloader
cpus=1 fix
CMI8738.kext
Bootloader (out of the box), Voodoo 9.5.0 kernel.
Mic. input doesn't works
Rampage Formula
Intel X48 + ICH9R
Install Method: iPC OSx86 10.5.6 Final
BIOS Version: 0701
ADI 1988B Audio: Both Line Out and Optical Out works, DTS via SPDIF OK
Marvell 88E8056 LAN: both ports work
ICH9R SATA: all 6 ports working
JMicron JMB368 PATA: works
USB: all working
Firewire: not yet tested
EFI v9 + Voodoo 9.5.0 kernel / Vanilla 9.6.0 kernel
Shutdown and Restart works. Sleep works but kernel panic if shutting down after wake up. Quad core and 8GB ram working. Must install one of the DSDT patch and Seatbelt.kext 10.5.5 (if not installed some dmg file will cause kernel panic upon mounting)
Intel P965 + ICH8R
Install Method:
iPC OSx86 Universal 10.5.6 PPF5 Final
ADI 1988A Audio: Line Out (use Azalia drivers)
Realtek 8111 LAN: OK (use Realtek R1000)
ICH8R SATA: working
USB: working
Firewire: ok
Chameleon 1.0.12 + Voodoo 9.5.0 kernel
Shutdown ok / Restart ok
( Install DSDTPatcher and Seatbelt.kext 10.5.5 and AppleSMBIOS-27rev3-MacPro ) If using SATA DVD drive to install, plug it as an external drive. In Bios, set SATA as ACHI, jMircon as ACHI, revert both back to IDE after install
Intel X58 + ICH10R
Install Method: iDeneb 1.4 (Leopard 1.5.6)
BIOS Version: 0602
ACL 1200 Audio: Line in/out work
Realtek 8111c LAN: 100%
ICH10R RAID/SATA: all 6 ports working (DVDs always recognized): no ICH10R RAID visible.
JMicron JMB322: Appears OK
USB: All OK
Firewire: not yet tested
8800GT 512MB x2 Both OK (no SLI)
6GB OCZ DDR3 Triple channel (@16000MHz): fully recognized.
EFI & Bootloader (out of the box), Voodoo 9.5.0 kernel + nvDarwin
OS reports a Mac Pro 3.1: Shutdown, Restart works. Logitech G15 Keyboard fully functional. Still running on one core (will update when DSDT is working).
The MOST important thing in the install is to ensure NO device is connected to the JMicron controller.
Your installation drive should be connected to port0 of the ICH10R, put your DVD drive wherever as long as it is on the ICH10R.
If you have a pre-built RAID, don't be concerned as adding devices will not affect the RAIDs integrity (as long as you leave all member disks attached).
You might need to use the Intel RAID control panel from within Windows to mark the "Non-member" disk as a "Non-RAID" disk, otherwise it will be invisible.
Thanks to ASUS, for ignoring every question I submited.
Rampage Formula
Intel X48 + ICH9R
Install Method: iPC OSx86 10.5.6 Final
BIOS Version: 0701
ADI 1988B Audio: Both Line Out and Optical Out works, DTS via SPDIF OK
Marvell 88E8056 LAN: both ports work
ICH9R SATA: all 6 ports working
JMicron JMB368 PATA: works
USB: all working
Firewire: not yet tested
EFI v9 + Voodoo 9.5.0 kernel / Vanilla 9.6.0 kernel
Shutdown and Restart works. Sleep works but kernel panic if shutting down after wake up. Quad core and 8GB ram working. Must install one of the DSDT patch and Seatbelt.kext 10.5.5 (if not installed some dmg file will cause kernel panic upon mounting)
P5E3 Premium Wifi edition
Intel X48 + ICH9R
Install Method: iPC OSx86 10.5.6 Final
BIOS Version: 0701
ADI 1988B Audio: Line Out works, haven't tested optical/SPDIF
Marvell 88E8056 LAN: both ports work
ICH9R SATA: all 6 ports working
JMicron JMB368 PATA: haven't tested, all my devices are SATA
USB: all working, front ports on computer case do not work. Have to use back ports
Firewire: not yet tested
EFI v9 + Voodoo 9.5.0 kernel
Shutdown and Restart works. Quad core and 4GB ram working. Must install one of the
10.5.5 (if not installed some dmg file will cause kernel panic upon mounting)
Intel X38 + ICH9R
Install Method:
GalaxyCDBoot, iPC OSx86 10.5.6 Final and also
Retail 10.5.6
BIOS Version: 1201
ADI 1988B Audio: Line Out, Optical Out and mic in OK.
Marvell 88E8056 LAN: OK
ICH9R SATA: working
USB: working
Firewire: ok
EFI v9 + Voodoo 9.5.0 kernel
Shutdown ok / Restart ok / Sleep no. EGhz + 4GB ram worked. Install
DSDTPatcher and Seatbelt.kext 10.5.5 and AppleSMBIOS-27rev3-MacPro
((2doJazz))
P5E WS PRO
Intel X38 + ICH9R
Install Method:
iPC OSx86 10.5.6 Final
Audio: Line Out, Optical Out
Marvell 88E8056 LAN: OK (after being patched 88E6)
ICH9R SATA: OK
Firewire: OK
ATI Radeon HD3870: OK
EFI v9 + Vanilla kernel
Shutdown ok / Restart ok / Sleep ok. Quad Ghz + 8GB ram OK. Put Bios in AHCI mode. Enable ACPI2, disable Speedstep. Use Natit + HDA Patcher with Linux 888 driver. Always boot with "-f" and all is ok.
Intel P45 + ICH10R
Install Method: iPC OSx86 10.5.6 Final PPF5
BIOS Version: 0609 (Patched with this
Realtek ALC1200 Audio: All works. SPDIF, DigOUT, Stereo, LineIn, LineOut. Needs kext though, search google.
Realtek 8111C LAN: works
ICH10R SATA: all 6 ports working
USB: all working
Firewire: ?
Chameleon 1.0.12 + Vanilla 9.6.0 kernel
Shutdown, Restart, Sleep all working. Quad core and 8GB ram working. Install the DSDT patch with HPEF (force recompile). Also you may need ICH10 Sata fix. Proven to work with 9800 GTX/+.
Intel P45 + ICH10R
Install Method: iPC OSx86 10.5.6
BIOS Version: 2001 mod
ADI AD2000B Audio: work with patch or lastest voodoo drivers
Marvell LAN: both ports work
ICH10R SATA: ok
Marvell PATA: works
USB: all working
Firewire: not yet tested
EFI + Voodoo 9.5.0 kernel / Vanilla 9.6.0 kernel
Shutdown and Restart works quite good. Dual core e5200 and 2Gb+2 kingston 800 ram working. Better install the DSDT patch. Same little problems in Snow Retail and iAtkos L2(ipc on pata ok, iAtkos on sata...) .
Intel P45 + ICH10
Install Method: iDeneb 1.4 (OS X 10.5.6)
BIOS Version: 0803
(unpatched 0502 was not working)
Realtek ALC1200 Audio: 2-channel output works, input and rear channels not tested (Used p45audio.zip from )
Atheros L1E LAN: the Atheros ethernet kext is located
ICH10 SATA: works (tested with HD)
Marvell 88SE6102 PATA: works (tested with DVD drive)
USB: works (tested with mouse and keyboard)
Chameleon from iDeneb 1.4 + Default kernel from iDeneb
Shutdown ? / Restart ? / Sleep ?. Core 2 Duo CPU, both cores working
Intel P45 + ICH10R
Install Method: iATKOSv5 10.5.6
BIOS Version: 0401
Realtek VIA VT1708S Works VoodooHDA 0.2.2
Atheros L1E Gigabit LAN controller Featuring AI NET 2: not working yet
jmicron: works, needed to update jmicron with
ICH10R SATA: works, does not show in profiler
USB: all working
Firewire: not tested
Chameleon: Chameleon 2
Shutdown, Restart, working. Have not tested sleep. Quad core and 4GB ram all working. DSDT_Patcher run after install to fix cpu aliases. Delete lines that begin with alias at start of file.
Intel P43 + ICH10R
Install Method: iPC OSx86 10.5.6 with PPF5 (Universal) / iDenb OSx86 10.5.5.
BIOS Version: 0905 (Patched BIO: )
Realtek ALC1200 Audio: Works
(Marvell 88E1 LAN: not tested (I disable on board lan card and use D-Link 530TX)) Actually uses Attansic L1E, working with
ICH10R SATA: works
PCIe Storage Controller PATA: works (tested with HD and DVD drive)
USB: all working
Firewire: not tested
Chameleon 1.0.12 + Vanilla 9.6.0 kernel
Restart and shutdown don't
work. Sleep work. (install AppleACPIPlatform.kext, update IOUSBFamily, and install EHCISleepEnabler.kext. Intel E8400 and 8GB ram working, dual boot with XP and OSX.
Intel G43 + ICH10
Install Method: boot132 + Retail 10.5.4. + further updates up to 10.5.6. Boot from external USB HDD. Retail image on jfs+ partiotion.
BIOS Version: 0503 (Patched BIO: )
Realtek ALC1200 Audio: Works
Internal LAN: works from installation process.
ICH10 SATA: works
PCIe Storage Controller PATA: not tested.
USB: all working
Firewire: not tested
Restart and shutdown works. Important notice: Leo on this mobo can works only with external PCIe video cards like ASUS GeForce 8600GT. Intel E7400 and 2GB ram working. GPT: GUID.
P5K Deluxe WiFi AP
Intel P35 + ICH9R
Install Method:
+ RETAIL 10.5.4 DVD
BIOS Version: 0812
AD1988B Audio: works ()
Marvell 88E8056 LAN: works
Realtek RTL8110SC LAN: works
Onboard WiFi: unstable ()
ICH9R SATA: works
JMicron JMB363 SATA: not tested
JMicron JMB363 PATA: not tested
USB: Works
EFI v9 + Vanilla 9.5.0 kernel
Shutdown, Restart, Sleep all working. Updated via
Installation instruction in richtext format: download . Here is a
of all the files you will need including my BIOS SETTINGS. You still have to download the combo update 10.5.6, Wireless driver, and purchase Leopard Retail 10.5.4.
P5K Deluxe WiFi AP or P5K Premium Wifi AP
Intel P35 + ICH9R
Install Method: Idened 10.5.6
AD1988B Audio: works
Marvell 88E8056 LAN: works
Realtek RTL8110SC LAN: works
Onboard WiFi:
ICH9R SATA: works
e-SATA: working, but set AHCI mode in Bios
Jmicron PATA: not tested
USB: Works
EFI v9 + Vanilla working
Shutdown, Restart, Sleep working.
Intel P35 + ICH9R
Install Method: Ideneb 10.5.6
BIOS Version: 0812
AD1988B Audio: works
Marvell 88E8056 LAN: works
Realtek RTL8110SC LAN: works
Onboard WiFi: wrks
ICH9R SATA: works
JMicron JMB363 SATA: not tested
JMicron JMB363 PATA: not tested
USB: Works
EFI v9 + Vanilla 9.6.0 kernel
Works like a charm. Remeber to install OSx86Tools. It will automatically find the right kext for you as long as the machine starts. Tried lots of other methods but this worked with no hassle.
Intel P35 + ICH9R
Install Method: iPC OSx86 10.5.6 with PPF5
BIOS Version: 1201
Realtek ALC883 Audio: working 4 input 8 output
Marvell 88E8056 LAN: works
ICHR9R SATA: works
JMicron PATA: not tested
USB: all working
Firewire: working
Chameleon 1.0.12 + Vanilla 9.6.0 kernel
Shutdown, Restart, Sleep all working. Quad core and 4GB RAM working.
Used Seatbelt, SATA icon fix, and USB fix just in case.
Intel P35 + ICH9
Install Method: Kalyway 10.5.1 ( 10.5.3-&10.5.5-&10.5.6 updated via apple software updates)
BIOS Version: 1104
Realtek ALC883 Audio: working (via AsaliaAudio(output)-&AppleHDA.kext) .
Attansic L1 LAN: works
ICH9 SATA: works
Marvell 6111 PATA: works.
USB: all working
Chameleon 1.0.12 + Vanilla 9.6.0 kernel
Shutdown, Restart, Sleep all working. Quad core and 4GB RAM working.
OpenHALTRestart.kext working.
Intel Q35 + ICH9DO
Install Method:
iDeneb 1.4 10.5.6
BIOS Version: 0902
Realtek ALC883: Front panel and back panel works.
Intel LAN: not yet tested
ICH9DO SATA: working
JMicron IDE: works (tested with a dvd drive)
USB: working
Firewire: not yet tested
9.2.0 kernel
Shutdown ok / Restart ok / Sleep does not work. Tested on an Intel Core 2 Quad Q9550 with 2gb ram.
P5KPL-AM SE
Intel G31 + Intel ICH7
Install Method: iDeneb 1.4 (Leopard 1.5.6)
BIOS Version: not flashed.
AUDIO: Use AzaliaAudio to make it work
ON BOARD LAN : Download drivers from realtek. 100% working.
SATA HD WD 160GB.
USB: All OK
Firewire: not yet tested
XFX 9600GT 1Gb 16x (Freeze if svideo is conected)
1x2GB Kingston DDR2 800
Shutdown, Restart works. Mac Keyboard fully functional.
The MOST important thing in the install is to customize the install checking ICHX fix and add all video drivers of NVIDIA before click install button. On BIOS is set: Enhanced, Enhanced Mode Support On: S-ATA. Plug and Play O/S: Yes, ACPI 2.0 Support: Enabled.
1. Install ideneb 1.5.6 with all NVIDIA Drivers (to make it boot at least)
2. Install aqua-macs NVIDIA 9 Series
3. add EFI String with OSXTOOLS (Custom --& 1GB --& VGA / DVI) ( I'm using VGA)
4. Remove kext /System/Library/Extensions/NVinject*
QE/HA 100%
P5KPL-AM EPU
Intel G31 + Intel ICH7
Install Method: iPC OSX86 PPF Final 10.5.6
BIOS Version: not flashed.
Audio VIA VT1708B: use AzaliaAudio (fontal panel not work)
Atheros Ethernet: work after, use this kext
Sata works (use chipset ichx fixed)
Nvidia geforce 8400gs: not use anything, install only Nvinject from iatkos v7 or ideneb 1.5
2GB A-Data 800mhz work
Intel GMA x3100 not work
Default bootloader (EFI v9) + Vanilla kernel
Shut Down, Restart work (sleep not tested but it should work) i fixed it with OHR (OpenHaltRestart), fix the finder with finder fix. If you have dual boot with windows 7 the hibernate will not work
P5KPL-AM IN/GB
Intel G31 + Intel ICH7
Install Method: iPC OSX86 PPF Final 10.5.6
BIOS Version: What it came with :D
Audio: VIA VT1708B: use AzaliaAudio, works perfectly with my 2.1 Speaker/subwoofer connected to the back panel (I didnt install front panel on my custombuilt Hackintosh.
Gigabit Ethernet works with Realtek R1000 from the DVD.
SATA works with ICHx kext
USB select USB drivers and the one that says this adds the things needed to use USB Mass Storage to the boot plist (NOT USB mount fix)
PS/2 Keyboard driver works for my PS/2 mouse and keyboard (use the keyboard driver if you have both keyboard and mouse as PS/2 - if you have only a PS/2 mouse but USB keyboard then use the mouse kext, but never use both)
1GB 800MHz DDR2 ram works with the SMBIOS for 800MHz ram.
PNY NVIDIA GeForce 8800GT 512MB works with NVDarwin 512MB but not with NVInject (your mileage may vary).
Default bootloader and the SpeedStep kernal, also install VoodooPower.
I didnt test sleep but shutdown and restart work great.
P5KPL/1600
Intel G31 + Intel ICH7
Install Method: iDeneb 1.4 (Leopard 1.5.6)
BIOS Version: not flashed.
VIA VT1708B: Use AzaliaAudio to make it work
Realtek 8110SC Gigabit LAN : 100%
SATA HD WD ok, SATA CD/DVDRW Samsung OK. IDE WD ok.
USB: All OK (One tested only)
Firewire: not yet tested
XFX 9600GT 1Gb 16x (Freeze if svideo is conected)
4GB Kingston DDR2 800 . Recorgized
Shutdown, Restart works. Mac Keyboard fully functional.
The MOST important thing in the install is to customize the install checking ICHX fix and add all video drivers of NVIDIA before click install button. On BIOS is set: Primary IDE 80GB WD(here i install Leopard), SATA1: 500GB WD, SATA2: DVD Samsung. ATA/IDE Config: Enhanced, Enhanced Mode Support On: S-ATA. Plug and Play O/S: Yes, ACPI 2.0 Support: Enabled.
OLD: Video card seems to work fine don't know how to test it. Resolution at
looks great.
OLD: Follow this instructions
to add Hardware Acceleration Support.
1. Install ideneb 1.5.6 with all NVIDIA Drivers (to make it boot at least)
2. Install aqua-macs NVIDIA 9 Series
3. Install EFI String with OSXTOOLS
4. Remove kext /System/Library/Extensions/NVinject*
Intel P35 + ICH9R Intel ICH7
Install Method: iPC 10.5.6 PPF5
BIOS Version: not flashed.
VIA VT1708B: VoodooHDA
PCIe Gigabit LAN : AttansicL1eEthernet
SATA: Works
PATA: Installation won't start
Intel GMA 3100: Not Supported
PCIe x16: GTX 275 (Working Perfectly)
Installed using SATA HDD & DVD Drive. PATA cases pre-installation crash. Didn't have to use the custom install. Shutdown and Restart work. Installed audio and LAN with OSX86Tools
P5W - DH Deluxe
Intel 975 + ICH7
Install Method: iPC OSx86 10.5.6 / Vanilla with Universal OSx86 Installer
Realtek ALC882M Audio: works after patch with AppleHDAPatcherv1.20 using ALC882_0x.txt
Marvell 88E8053 LAN: both ports work
Onboard WiFi: works with Realtek 8187 driver but unstable
USB: all working
Firewire: working
EFI v9 + Vanilla Kernel / Chameleon 1.0.12 + Vanilla 9.6.0 kernel
Restart and shutdown work. Sleep works after deleting AppleHPET.kext. Q6600 quadcore OC'd to 3.4Ghz / Q9650. Apple Software Raid works.
Intel P965 + ICH8R
Install Method: Retail install with P5B v2 DFE132 disc ()
BIO Version: ?
ADI 8 Audio: ?
Attansic L1 LAN: ?
ICH8R SATA: ?
JMicron JMB363 SATA: ?
JMicron JMB363 PATA: ?
USB: ?
VIA VTa Firewire: ?
EFI v9 + Vanilla kernel
Shutdown ? / Restart ? / Sleep ?.
Intel P965 + ICH8
Install Method: iDeneb v1.4:
BIO Version: ?
Realtek ALC662 Audio: works
Attansic L1 LAN: works
ICH8 SATA: works
JMicron JMB363 SATA: not tested
JMicron JMB363 PATA: works (tested with DVD drive)
USB: ?
EFI v9 + Vanilla Kernel
Shutdown ? / Restart ? / Sleep ?. Selected drivers from iDeneb v1.4:
PS2 fix keyboard
Apple Azadia Audio
Jmicro ATA
ICHx fixed
AttansicL1 (network)
PowerOff_OHR
Intel G965 + ICH8
Install Method: Retail 10.5.4 + Combo Update to 10.5.6 (by 314TeR), or iPC.OSx86 10.5.6
BIO Version: ?
Audio: AD1988A: not tested
Marvell 88E8001 LAN: works (used skge.kext)
ICH8 SATA: works
JMicron JMB363 SATA: works
JMicron JMB363 PATA: works
USB: works (used LegacyIOAHCIBlockStorage.kext)
Intel Integrated GMA X3000: works (you can use dedicated PCIe video card instead)
EFI v9 + 9.6.0 Vanilla Kernel
Need patches. Shut Down not working. Installed: AppleDecrypt.kext, Disabler.kext, LegacyAppleAHCIPort.kext, SMBIOSResolver.kext.
Intel G965 + ICH8
Install Method: iPC OS X 10.5.6 and later on up graded using iDeneb 1.6 OS X 10.5.8 lite edition
Azalia Audio: works (mic not working, front panel mic and headphone input not working)
LAN: use Realtek drivers given in the list before the installation process
ICH8 SATA: works
USB: all working
Intel Integrated GMA X3000: tested and working (used GeForce 8600GT instead)
use seatbelt for fixing mounting dmg files.
buhay na buhay ang hackintosh!!!
Shutdown, Restart, Sleep all working. Tested on Intel Core Duo 3.0GHz + 4GB DDR2 667 ram.
Intel G965 + ICH8
Install Method: iDeneb 1.4
Realtek ALC883 Audio: works (mic not working)
Attansic L1 LAN: works
ICH8 SATA: works
JMicron JMB368 PATA: works (tested with DVD drive and used for booting installation)
USB: all working
Intel Integrated GMA X3000: not tested (used GeForce 8600GT instead)
EFI v9 and Vanilla Kernel
Shutdown, Restart, Sleep all working. Tested on Intel Core 2 Duo E7300 @ 2.66GHz + 2GB DDR2 667 ram.
Intel G956 + ICH7
Install Method: iPC 10.5.6 Beta
Realtek ALC883 Audio: does not work
Attansic L1 LAN: does not work
ICH8 SATA: works
PATA CD/DVD Combo drive: not tested
USB: does not seem to work
Intel Integrated GMA 3000: not tested (used e-GeForce 8400 GS instead)
EFI Voodoo Kernel
Shutdown, Restart, working. Sleep not tested. Tested on Intel Core 2 Duo E6200 @ 1.86GHz + 1GB DDR2 553 ram.
Intel 945GZ + ICH7
Install method: iPC 10.5.6 Final
BIO: ?
Marvell 88E8001 LAN: works (used patch from )
Realtek ALC883 Audio: works (used ALC662 driver instead)
ICH7 SATA: works
ICH7 PATA: works
USB: all ports working (some
report that USB only works on 10.5.6, if AppleHPET.kext gets deleted/renamed)
Intel Integrated GMA 950: works (used this
USB: works
EFI v9 + 9.5.0 voodoo kernel / Vanilla Kernel
Shutdown, Restart, Sleep all working.
Intel 945P + ICH7
Install Method: iPC OSx86
Realtek ALC662 Audio: works
Realtek R1000 LAN: works
SATA: works
PATA: works
USB: works
EFI v9 + 9.5.0 Voodoo Kernel (if kernel panic, use )
Shutdown ? / Restart ? / Sleep ?. Update function works, fix and patches selected:
shutdown / restart fix
RemoveAppleintelCPUPowerManagment
Patch DSDT and Verbose Mode
P5LD2-SE/C
Intel 945P + ICH7
Install Method: Retail 10.5.6 (Vanilla Kernel) +
BIOS Version: 1301
ADI 1986A Audio: Works using Azalia, output only
Realtek RTL8111B LAN: Unknown Error, auto get IP address even the cable didn't plug in/crash with Time Machine
SATA: Works
PATA: Works
USB: Works
S/PDIF : Not tested
PS/2 : Not Works, alternate use USB keyboard/mouse or install
+ Vanilla 9.6.0 kernel
Shutdown, Restart, Sleep all working. Tested on Intel Core 2 Duo E4300 @ 1.8GHz + 2GB DDR2 667 RAM GeForce 9400GT, add extra KEXTs:
IntelCPUPMDisabler (include in BOOT DFE 146 initrd.dmg)
SMBIOSEnabler (include in BOOT DFE 146 initrd.dmg)
UPDATE TO 10.5.7 SUCCESSFUL!!
Intel 865G
Install Method: iPC OSx86 10.5.6
SATA HDD+SATA DVD, selected SATA ICHx driver
Ethernet Intel 82547EI & Audio ADI AD1980 working out of the box
video not tested...
Voodoo 9.5.0 kernel
IPC OSx86 10.5.6 Final.
VIA P4M800 + VIA 8237R PLUS
Install Method: iPC OSx86 10.5.6
BIO: ?
VIA 6103 PHY LAN: works (selected VIARhine.kext)
C-Media CMI9761A: works (selected AppleAC97Audio.kext)
SATA: ?
PATA: ?
EFI v9 + Voodoo 9.5.0 kernel
Shutdown ? / Restart ? / Sleep ?. Need ToH AppleSMBIOS, patched AppleAC97Audio.kext, VIARhine.kext, all can be found on iPC OSx86 10.5.6 Final.
Striker II NSE
nVidia nForce 790i SLI
Install Method: iPC OSX86 10.5.6 updated to 10.5.8 with IdenebCombo update reboot twice with these flags during prompt (voodoo -f) Both times! Wait patiently it works eventually after 2nd reboot!
BIO Version: ?
ADI 1988B Audio: works!
LAN: works! (used wifi instead, LAN drivers can be found )
SATA: works (tested with HD and DL-DVD drive, used AppleNForceATA.kext from
PATA: not tested
USB: works
Esata: works via rocketraid 2302 with driver from highpoint web site
Firewire: not tested (removed the 5 kexts that start with IOfirewirewhatever.kext to get rid of firewire invalid during boot )
EFI v9 + 9.5.0 kernel (upgraded to )
Only restart works. Tested on Q6600 @ 2.4GHz + 2GB DDR3 1333 ram + Geforce GTX280 works with evga driver have to update to 10.5.8 then install video drivers! Thanks Netkas!(only tested up to
all work!)
Need seatbelt.kext 10.5.5. Tri-booting Mac+Vista+Linux using easyBCD:
Pri Partition 1 osx86, Pri Partition 2 Vista, Logical Partition 3 Ubuntu
BOOTCAMP does not work yet? Hopefully in the future
nVidia nForce 750i SLI
Install Method: iDeneb v1.4 10.5.6 no kernel flags needed.
Realtek ALC883 Audio: Working with ALC 889 888 6 port and 883 6 port (all three)
LAN: NForceLan.kext (had to delete forcedeath.kext)
SATA: works (used AppleNForceATA driver)
PATA: not tested
USB: works
Firewire: not tested (disabled)
Can boot with just maxmem=3072, but wireless disconnects and cannot reconnect with a reboot.
This issue does not happen when using a single core.
EFI v9 + 9.5.0 Voodoo kernel (can patch to 9.6.0 after install with no issues, but unstable unless booting with one core cpus=1)
Shutdown ? / Restart ? / Sleep ?. (Got it working with default 9.6.0)
NOTE: On boot into initial setup, the 'Select a Country' displayed no countries, preventing the setup from continuing.
A reboot with the same boot settings fixes this for some reason.
Stable only with only one core enable with 3GB ram using maxmem=3072 cpus=1 boot flag
Need seatbelt.kext (for dmg mounting with voodoo kernel)
Tri-Boot (XP, Windows 7, OS X). Intel Core 2 Quad Q9300 + 4 GB Ram + Zotac 8800 GT 512MB
Got full support with sound and Ethernet after deleting forcedeath kext.
Striker Extreme
nVidia nForce 680i SLI
Install Method iPC OSx86 10.5.6
BIO Version: 1301
ADI 1988B Audio: not tested
LAN: works
SATA: works (tested with HD only, used AppleNForceATA nForce Drivers)
PATA: works (tested with DVD drive)
USB: works
Firewire: works
EFI v9 + 9.5.0 Voodoo Kernel
Tested on Q6600 @3GHz + 4GB DDR2 @933Hz (Need 4GB AppleNForceATA fix) + Asus Geforce 9800GTX 512Mb (Fully working) + IDE DVD drive. Software Update works from menu. Restart and Shutdown works properly.
Intel P45 + ICH10R
Install Method: iDeneb 10.5.6
BIOS Version: 1406
Realtek ALC1200: works
Gigabit (On board) LAN: works
ICH10R SATA: works
Firewire: Not tested
USB: Works
Vanilla 9.6.0
Tested on : QGHz -- 6GB DDR2 @800Hz -- Gigabyte 7900GTX (No OpenGL) -- 200GB IDE HDD(Backup HDD + IDE DVD Burner --
OSx86 on 250GB SATA HDD -- Win Vista64 250GB HDD (Dual boot not working) Still working on : OpenGL for the GPU & Dual boot.
Shutdown YES / Restart YES / Sleep YES
P5GC-MX/1333
Intel Dual Core Pentium, 2.5 GHz
Chipset - Intel ICHx
Audio - ALC662
Ethernet - do not select anything during installation
SMBios - Patch 800MHz
Install Method: iPC Mac OSx86 Universal PPF5 Final ISO
LAN: works with this kext [AttansicL2Ethernet090219.kext.zip]
Did not try on board video : Used nVidia GeForce 9500GT 1GB DDR2 - Installed MBPNV Package - osx86tools to modify boot string.
SiS 671 Northbridge/SiS 968 Southbridge
Install Method: used iDeneb v1.4 10.5.6
Audio: Realtek HD Audio with AppleAzalia kext
LAN: Realtek RTL8139 (PCI onboard LAN doesn't work unless if you use a kext)
SATA & IDE: SATA works out of the box
Optical Drive: Philips SPD60002T DVD-RAM
Shutdo sleep mode not yet tested but may probably work
Tested with cpus=1 fix, but may work without it
SIS also runs on nVidia 8400GS 512MB using NVdarwin 1.2.5
Uses Vanilla 9.6.0 Kernel
No; additional kexts may be needed
Hardware Name
EFI/Vanilla kernel
Installation Notes
AMD 780G + SB700
Install Method: iDeneb 10.5.6 works Perfect
9.5.0 Voodoo Kernel
BIOS setup options: (Enable AHCI & ACPI 2.0)
BIOS Version: 1501
ALC1200 Audio: All works. (select ALC1200 driver during install)
Attansic L1 Gigabit LAN: works (select Attansic L1 driver during install)
SB700 SATA: works (tested with HD and DVD drive)
SB700 PATA: not tested
Integrated ATI Radeon HD 3200: not working
USB: works
Firewire: not tested but detected in system profile
9.5.0 Voodoo kernel
Shutdown ? / Restart ? / Sleep ?. Tested by Boris.P. with Radeon HD3850 fully working with this
AMD 780G + SB700
Install Method: iAtkos 4a works Perfect
9.2.0 ToH Kernel
BIOS setup options: (Disable ACPI 2.0, Set Storage Mode to AHCI, then install
kexts for faster hard drive/dvd driver support, after installing set the Storage Mode to IDE)
BIOS Version: 1501
ALC888s Audio: All work
Attansic L1 Gigabit LAN: Don't know, I only use wireless
SB700 SATA: works (tested with HD and DVD drive)
SB700 PATA: works (tested with HD and DVD drive, is very slow until
kexts are installed.
Integrated ATI Radeon HD 3200: don't know.
USB: works
Firewire: don't know
9.2.0 ToH kernel
Shutdown works / Restart works / Sleep (don't know, don't care).
Tested by Amazing Lemur with GeForce 9800GTX fully working with this. See
thread for help: My setup:
AMD Athlon 64 X2 5000+ Black Edition (2.6 ghz, SSE2, SSE3)
4gb DDR2 800 RAM (4 x 1gb)
Asus M3A-H/HDMI Motherboard
nVidia GeForce 9800GTX 512mb
One IDE Maxtor 40gb 7200rpm hard drive I am trying to install on to.
One IDE DVD/CD Burner, my only internal DVD drive.
One SATA 750gb hard drive partitioned into two NTFS partitions.
M3A79T Deluxe
AMD 790FX + SB750
Install Method: iDeneb 10.5.6
9.5.0 Voodoo Kernel
BIOS setup options: Enabled AHCI
BIOS Version: 0602
AD2000B Audio: works (driver )
Marvell Gigabit LAN: works (select Marvell driver during install)
SB750 SATA: works (tested with HD and DVD drive)
SB750 PATA: not tested
USB: works
Firewire: not tested but detected in system profile
9.5.0 Voodoo kernel
Shutdown ? / Restart ? / Sleep ?. Tested with Radeon HD4870 fully working with this .
AMD 780G + SB700
Install Method: iDeneb 10.5.6
BIOS Version: 0701 (Enable ACHI & ACPI 2.0)
Realtek R1000 LAN: works
ALC1200 Audio: works
SATA: works
PATA: not tested
Integrated ATI Radeon HD 3200: not working
USB: ?
Firewire: works
EFI v9 + 9.5.0 Voodoo Kernel
Shutdown and restart work, sleep not working. Be sure to use the seatbelt fix if you use Voodoo kernel. Select the corresponding kexts for chipset/audio/video/LAN iDeneb 10.5.6.
AMD 780G + SB700
Install Method: IPC 10.5.6
BIOS Version: 1902 (Enable ACHI & ACPI 2.0)
Custom settings (keep to a minimum, I found a lot of showstoppers)
9.5.0 Voodoo Kernel
Chipset: None selected
Realtek R1000 LAN
Seatbelt.kext 10.5.5
PS/2 Keyboard Fix
SATA: Hard drive and CD work
PATA: Could not get install working on an IDE hard drive
Integrated ATI Radeon HD 3200: Did not test
ATI Radeon HD 3400 PCIE:
USB: Mouse, keyboard, headset (speakers and microphone) all working
USB Audio: works
PS2 keyboard: works
Firewire: not tested
Install DVD takes 5 or 10 minutes to boot
The actual install is & 10 minutes if I skip DVD verification
After install, machine reboots and gives a kernel panic
Reboot, remove DVD (or set HD as first boot device in BIOS)
On first Mac OS boot, use boot option "-f", without the quotes
AMD 790GX+SB750
Install Method: iDeneb v1.4 10.5.6
9.5.0 Voodoo Kernel
BIOS setup options: Enabled AHCI, Use S3-only in Power Management to avoid Kernel Panics when power shifts
BIOS Version: 602
Audio: Realtek ALC1200
Network: Onboard Marvell 88E8056 Gigabit LAN (Must use Marvell driver)
SATA HDD and DVD ROM: Work Perfect
USB: all Working
Firewire: Working
9.5.0 Voodoo
Seatbelt fix required for loading .dmg files, Doesn't recover from sleep
Nvidia nForce 500 SLI
Install Method: iPC OSx86 10.5.6 - PPF2 (need flag "cpus=1" to boot DVD)
BIO Version: ?
LAN: works ()
Realtek ALC850 Audio: works
SATA: ?
PATA: ?
EFI v9 + 9.5.0 voodoo kernel
Sleep, Restart and Shutdown all working.
M2NBP-VM CSM
Nvidia Quadro NVS 210S + Nvidia nForce 430B
Install Method: iPC OSx86 10.5.6
BIO Version: ?
nVidia nForce 430B LAN: ? (used )
ADI AD1986a Audio: 2 channel only with
Integrated nVidia GeForce 6 GPU: ? (used )
SATA: ?
PATA: ?
USB: ?
9.5.0 Voodoo kernel
Shutdown ? / Restart ? / Sleep not working (just freeze)
M2NBP-VM CSM
Nvidia Quadro NVS 210S + Nvidia nForce 430B
Install Method:
with Retail 10.5.6 DVD and Chameleon 2.0 RC3 bootloader
BIOS Version: 0902
nVidia nForce 430B LAN: Working (only tested 100mbit) (used )
ADI AD1986a Audio: 2 channel out only with
Integrated nVidia GeForce 6 GPU: Not tested, using PCIe 8600GT 256mb (used )
SATA: Working
(New version with 4gb ram fix)
PATA: Working
USB: Works OOB after 9.6.0 kernel (maybe Chameleon too)
9.6.0 Voodoo kernel
Shutdown Working / Restart Working / Sleep not working (Display sleeps, fan's don't, does not wake)
M2A-VM HDMI
Nvidia GeForce 8400GS ATI SB600
it seems that you have to disable USB legacy support on BIOS for the computer to start.
Install Method: XxX X86 Final Rev 1
BIO Version: No Updates Needed
ATI SB600 (select appleatiata on install)
LAN: RTL8 something (used Realtek R1000driver)
Realtek ALC883
SATA: WORKS (select appleatiata on install)
PATA: WORKS (select appleatiata on install)
USB: WORKS
Installation takes about 30 Min
NOTE: on verbose boot it might say FAILED TO LOAD APPLEPS2NUB and some other fail but dosen't seem to effect the system
9.5.0 Voodoo kernel
Shutdown Works / Restart Works / Sleep not working (cannot resume from it, blank screen)
Nvidia GeForce 7300GT/ATI SB600
You have to disable USB legacy support on BIOS.
Install Method: XxX X86 10.5.6 FINAL
BIOS Version: No Updates Needed
ATI SB600 (select appleatiata on install)
LAN: RTL (use Realtek R1000driver or Realtek 8111 both work flawless)
Realtek ALC883 (i used new ALC 883 drivers for 3 ports)
SATA: WORKS (select appleatiata on install)
PATA: WORKS (select appleatiata on install)
USB: WORKS without patch
Installation takes about 30 Min
For my video card i had to chose no video drivers because it did not boot, i installed them after I chose OpenHaltRestart.kext
9.5.0 Voodoo 1.0 (intel/amd)
Shutdown Works / Restart Works / Sleep not tested
M3N78-EMH HDMI
NVIDIA GeForce 8200 Chipset (+in my case: gforce8600)
BIOS: Sata -& AHCI
Install Method: iDeneb 1.4 OSx86 10.5.6, Voodoo9.5, all Alternative Essentials, Audio ALC 883 , Chipset: Apple nForceATA & AppleGenericPCATA, Ethernet: forcedeth, Fixes: Seatbelt, Poweroff Fix, all System Utilities.
have seperate geForce 8600 so is used NVInject for 512MB
updated all software EXCEPT 10.5.7 sys update
9.5.0 Voodoo kernel
working: usb, sata, pata, frontrow, open disk images, onborad lan, idisk access, mobile me sync (idisk & mm don't work on all my hackintoshes)
problems: onboard audio (sysprofiler says no audio), finder on other (real)Mac does not load content of shared folders (double click on client to mount then it works)
untested: onboard grafik, sleep
note: shutdown blanks screen and then takes some 20secs to shutdown hardware, restart also takes long (be patient! i had no hand [3 days]), no safari 4 because no 10.5.7 yet
NVIDIA GeForce 8300 Chipset
Install Method: iPC OSx86 10.5.6, Voodoo 9.5.0 kernel, Nvinject default, Realtek R1000, seatbelt.kext, SATA icon fix (new) and Applications were the ONLY OPTIONS SELECTED at the customize install window.
BIOS: Version 0520, Build 04-06-09, American Megatrends v02.61 (ACPI 2.0 support-disabled, ACPI APIC support-enabled) OR use MacPro SMBIOS
LAN: works with Realtek R1000
Audio: works with AppleAzaliaAudio.kext
SATA: works
PATA: untested
USB: works
Video: On-boa used PNY Geforce 8800GT 512mb PCI-e card with NVinject, but later added EFI string and enabled QE/CL using OSX86 Tools. Then deleted NVinject using Terminal.
Video: On-board nVidia MB will perfectly work with NInject 256MB
9.5.0 Voodoo kernel with 10.5.5 seatbelt.kext at install.
Later updated to 9.6.0 Anv XNU kernel with associated kexts and it runs much more stable.
Currently running a new Voodoo based XNU patched kernel for 10.5.7 (darwin 9.7) released by qoopz.
System: 2.6 GHz AMD Athlon 64 X2 5000+, 6GB DDR2 800 MHz (8GB DDR2 boots only in Safe-mode), 400 GB SATA, PNY Nvidia Geforce 8800GT 512 MB PCI-e, LG SATA 20X DVD-RW, Geekbench score consistently 2786 (first time reported as "Hackintosh", the 2nd test reported as "MacBookPro5,1" strange. Edited the "com.apple.Boot.plist" to read MacPro3,1 eliminating one of the startup delays and again shows as Hackintosh under Geekbench.
Working: USB, FIREWIRE, SATA, DVD disc burning, open disk images (as long as the seatbelt.kext version matches the kernel), on-board LAN, Epson Stylus Photo 820 printer via USB, Microsoft Wireless Comfort keyboard and Mouse work out of the box, on-board audio registers as "Intel High Definition A Device ID: 0x104382FE in System P and HD audio output in Sound control panel". Was able to install Safari 4.0.2 and the Java updater by modifying the "SytemVersion.plist" to read 10.5.7 instead of 10.5.6. Changed back when finished installing and everything works perfectly.
Problems: About This Mac reports as 2.6 GHz Intel Dual Core instead of AMD, I've tried updating to 10.5.7 with the iDeneb combo but it would not boot and leave me with a black screen. Installed 8GB of DDR2 RAM but only boots to the point where the desktop is shown, but no cursor or icons appear. Only blue screen. 6GB and less DDR2 works but some apps like software updater, console and installer apps crash unexpectedly. With 4GB of memory all apps work correctly. Must be something about 64-bit addressing and AMD processors.
A8N-SLI Premium
NVIDIA nForce4 SLI
Install Method: iPC OSx86 10.5.6
BIO Version: ?
LAN: ? (used AppleNForceATA - test)
Realtek ALC850 Audio: works
SATA: ?
PATA: ?
USB: ?
EFI v9 + 9.5.0 Voodoo kernel
Sleep, Restart and Shutdown all working. Tested with Opteron 165 @ 2.7GHz. XBENCH result 135.26.
Need seatbelt.kext + Apple SMBIOS 800
Nvidia nForce4 Ultra
Install Method: iPC OSx86 10.5.6 Final
BIO Version: ?
LAN: ? (used AppleNForceATA - test)
Realtek ALC850 Audio: works
SATA: ?
PATA: ?
USB: ?
EFI v9 + 9.5.0 voodoo kernel
Shutdown ? / Restart ? / Sleep ?.
NVidia nForce4
Install Method: iPC OSx86 10.5.6 PPF6 with Voodoo 9.5.0 kernel, AppleNForceATA (not "test" one), ALC850, kXAudioDriver (for Creative Audigy card), Forcedeth (not "V variation" one!), seatbelt.
BIOS: Version 1003, no special settings
LAN: works with Forcedeth
Audio: ?
SATA: works with AppleNForceATA
PATA: works with AppleNForceATA
USB: works
9.5.0 Voodoo Kernel
Problems: onboard audio card is not detected (I don't use it, so didn't even try to solve), cannot wake from Sleep (same)
Works: everything else (even with overclocked CPU)
M2N-MX SE PLUS
Nvidia nForce430/GeForce6100
Install Method: iPC OSx86 10.5.6 Final
BIO Version: Version 0602
LAN:NForceLAN
Realtek ALC662 Audio: works
SATA: Works
PATA: Works
EFI v9 + 9.5.0 voodoo kernel(As long as support for AMD)
Shutdown/Restart-Working - Sleep (Doesn't Wo
